29.035.30 陶瓷和玻璃绝缘材料 标准查询与下载

GB/T 8411.3-2009 陶瓷和玻璃绝缘材料.第3部分:材料性能

GB/T 8411的本部分规定了各类陶瓷和玻璃绝缘材料的特性和最低性能参数。 GB/T 8411的本部分适用于电气绝缘用陶瓷、玻璃陶瓷、玻璃结合云母和玻璃材料。作为指南，本部分列出了一般电气绝缘用材料的分类，同时还列出了用GB/T 8411.2规定的试验方法测定的每一亚组或类型材料相关性能的典型数值。这些数值仅适用于特定的试样和试验方法，不能当然地推广应用于其他形状、尺寸或生产方法制备的试样和产品。

Ceramic and glass insulating materials.Part 3:Specifications for individual materials

GB/T 8411.2-2008 陶瓷和玻璃绝缘材料.第2部分:试验方法

GB/T 8411的本部分适用于电绝缘用陶瓷、玻璃陶瓷、玻璃结合云母和玻璃材料。本部分规定了试验方法，目的在于用这些方法测出试样所用材料的典型性能参数。在多数情况下，电绝缘陶瓷部件的尺寸和形状与试样相差很远，因此这些测试所得出的结果仅是实际部件特性的指导性参数。对试样成型和试样处理方法的要求在相关处讨论。

Ceramic and glass insulating materials.Part 2:Methods of test

GB/T 8411.1-2008 陶瓷和玻璃绝缘材料.第1部分：定义和分类

GB／T 8411的本部分适用于电绝缘用陶瓷、玻璃陶瓷、玻璃一云母和玻璃材料，本部分给出所用术语的定义，并按化学成分、品质特性及应用范围将不同类型的材料以列表方式按组分类。

Ceramic and glass insulating materials.Part 1:Definition and classification

T/CASME 491-2023 智能通信手机盖板用微晶玻璃

本文件规定了智能通信手机盖板用微晶玻璃的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Microcrystalline glass for smart communication phone cover

DB3603/T 4-2022 电瓷用半导体釉制作技术规范

Technical specifications for the manufacture of semiconducting glazes for electric porcelain

KS C IEC 60672-3-2022 陶瓷和玻璃绝缘材料 第3部分：各种材料的规范

Ceramic and glass-insulating materials — Part 3: Specifications for individual materials

DB43/T 2371-2022 传感器用陶瓷基片通用技术条件

General specifications for ceramic substrates for sensors

ASTM D5642-16(2022) 密封管化学兼容性试验的标准试验方法

1.1 This test method covers procedures for evaluating the interaction of electrical insulation components used, or intended to be used, in electrical insulation systems. 1.2 This test method is useful for determining compatibility but additional testing will potentially be required for some applications. 1.3 This test method also provides useful information about the behavior of selected insulating materials when compared to a reference value as opposed to a reference system. 1.4 This test method does not cover systems which operate in liquids or gases other than air. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See also 8.2.4, 8.3.1, and 8.3.2.1. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Sealed Tube Chemical Compatibility Test

T/GDWCA 0076-2021 耐火电线电缆用可陶瓷化硅橡胶复合带

本文件规定了耐火电线电缆用可陶瓷化硅橡胶复合带的产品型号、技术要求、试验方法、检验规则、标志、包装、运输及贮存。  本文件适用于以耐火电线电缆用可陶瓷化硅橡胶、玻璃纤维布为原料压延成型的耐火电线电缆用可陶瓷化硅橡胶复合带。 本产品适用于替代云母带等耐火材料作为电线电缆的耐火层，矿物电缆绝缘层和耐火层。

Ceramicized silicone rubber composite tape for fire-resistant wires and cables

ASTM D2149-13(2021) 频率为10MHz和温度为500°C的固体电介质的介电常数和损耗因数的标准试验方法

1.1 This test method covers the determination of the relative permittivity (dielectric constant) and dissipation factor of solid dielectrics from 50 Hz to 10 MHz over a range of temperatures from −80 to 500 °C.2,3 Two procedures are included as follows: 1.1.1 Procedure A—Using Micrometer Electrode. 1.1.2 Procedure B—Using Precision Capacitor. NOTE 1—In common usage the word “relative” is frequently dropped. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 °C

ASTM D2442-75(2020) 用于电气和电子应用的氧化铝陶瓷的标准规范

1.1 This specification covers the requirements for fabricated alumina parts suitable for electronic and electrical applications and ceramic-to-metal seals as used in electron devices. This specification specifies limits and methods of test for electrical, mechanical, thermal, and general properties of the bodies used for these fabricated parts, regardless of part geometry. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Alumina Ceramics for Electrical and Electronic Applications

KS C IEC 60672-3-2017(2022) 陶瓷和玻璃绝缘材料.第3部分:单项材料规范

Ceramic and glass-insulating materials — Part 3: Specifications for individual materials

KS C IEC 60672-3:2017 陶瓷和玻璃绝缘材料 第3部分：单项材料规范

Ceramic and glass-insulating materials — Part 3: Specifications for individual materials

KS C IEC 60672-3-2017 陶瓷和玻璃绝缘材料 - 第3部分:各种材料的规格

Ceramic and glass-insulating materials — Part 3: Specifications for individual materials

ASTM D2442-75(2016) 用于电气和电子应用的氧化铝陶瓷的标准规范

1.1 This specification covers the requirements for fabricated alumina parts suitable for electronic and electrical applications and ceramic-to-metal seals as used in electron devices. This standard specifies limits and methods of test for electrical, mechanical, thermal, and general properties of the bodies used for these fabricated parts, regardless of part geometry. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Alumina Ceramics for Electrical and Electronic Applications

ASTM D5642-16 密封管化学相容性试验的标准试验方法

1.1 This test method covers procedures for evaluating the interaction of electrical insulation components used, or intended to be used, in electrical insulation systems. 1.2 This test method is useful for determining compatibility but additional testing will potentially be required for some applications. 1.3 This test method also provides useful information about the behavior of selected insulating materials when compared to a reference value as opposed to a reference system. 1.4 This test method does not cover systems which operate in liquids or gases other than air. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See also 8.2.4, 8.3.1 and 8.3.2.1

Standard Test Method for Sealed Tube Chemical Compatibility Test

DB44/T 1829-2016 瓷质面层纤维水泥装饰板

本标准规定了瓷质面层面层纤维水泥装饰板的术语和定义、分类和标记、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于建筑工程室内外墙面和地面用瓷质面层纤维水泥装饰板。

Porcelain facing fiber cement decorative board

DB44/T 1828-2016 瓷质面层再生骨料装饰板

本标准规定了瓷质面层再生骨料装饰板的术语和定义、分类和标记、原材料、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑工程室内外墙面、地面装饰用瓷质面层再生骨料装饰板。

Porcelain facing recycled aggregate decorative board

GSO IEC 61067-1:2015 玻璃纤维编织带和聚酯玻璃纤维带规范 第1部分：定义、分类和一般要求

This part of IEC 1067 specifies requirements for loomstate, continuous filament tapes woven on conventional or shuttleless looms from either glass fibres or a combination of glass and polyester fibres. The ranges of nominal sizes covered by this standard are: width: 10 mm to 50 mm, thickness: 0,05 mm to 0,40 mm.

Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements

GSO IEC 61067-2:2015 玻璃和编织聚酯玻璃纤维带技术规范 第2部分：测试方法

This International Standard specifies requirements for loomstate, continuous filament tapes woven on conventional or shuttleless looms from either glass fibres or a combination of glass and polyester fibres. This part of IEC 1067 gives methods of test to demonstrate compliance with the general requirements of Part 1 and the specific requirements of Part 3.

Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test