49.095 客运设备和座舱设备 标准查询与下载
共找到 121 条与 客运设备和座舱设备 相关的标准，共 9 页
本标准规定了用于直升机乘员的直升机用水下应急呼吸器的结构、技术要求、试验方法、检验规则、标志和随行文件、包装、运输和贮存要求。 本标准适用于直升机用水下应急呼吸器(以下简称“水下应急呼吸器”)。
Underwater emergency breathing apparatus for helicopter
- ICS
- 49.095
- CCS
- V44
- 发布
- 2018-07-13
- 实施
- 2019-02-01
Inflatable life preservers for aviation
- ICS
- 49.095
- CCS
- V44
- 发布
- 2018-07-13
- 实施
- 2019-02-01 00:00:00.0
本标准规定了滑翔伞的组成、技术要求、测试方法、测试报告和存档要求。 本标准适用于滑翔伞结构强度测试。
Requirements and testing methods of structure strength for parag lider
- ICS
- 49.095
- CCS
- V44
- 发布
- 2018-07-13
- 实施
- 2019-02-01
Safety design for oxygen system of civil aircraft
- ICS
- 49.095
- CCS
- V44
- 发布
- 2018-02-06
- 实施
- 2018-09-01 00:00:00.0
1 Scope This document specifies requirements for Emergency Breathing Systems (EBS) for use by helicopter crew and passengers in the event of a ditching or water impact , to ensure minimum levels of performance. It applies to EBS capable of being successfully and reliably deployed in air and underwater, for use by adults only. This document is applicable to compressed air and hybrid rebreather designs of EBS. It does not apply to EBS that cannot be successfully and reliably deployed underwater.
Aerospace series. Rotorcraft Emergency Breathing Systems (EBS). Requirements, testing and marking
- ICS
- 49.095
- CCS
- 发布
- 2023-02-28
- 实施
- 2023-02-28
Cabin air quality on civil aircraft - Chemical compounds
- ICS
- 49.095
- CCS
- 发布
- 2021-04-01
- 实施
- 2021-04-01
BS EN 17436. Cabin air quality on civil aircraft. Chemical compounds
- ICS
- 49.095
- CCS
- 发布
- 2021-03-11
- 实施
- 2021-03-11
本标准规范了轻小型民用航空器驾驶员头盔（以下简称“头盔”）的技术、质量保证及包装、运输要求等内容。
Safety technical specification for civil light-small type aircraft pilot's Helmet
- ICS
- 49.095
- CCS
- C374
- 发布
- 2021-03-10
- 实施
- 2021-03-11
BS EN 17436. Cabin air quality on civil aircraft. Chemical compounds
- ICS
- 49.095
- CCS
- 发布
- 2021-03-04
- 实施
- 2021-03-04
Cabin air quality on civil aircraft - Chemical compounds
- ICS
- 49.095
- CCS
- 发布
- 2021-03-00
- 实施
What is BS EN 4705 about? BS EN 4705 is a European standard that has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN), that discusses light and lighting of aircraft cabins. BS EN 4705 describes the measurement method for the lifetime behaviour of aircraft cabin light units in a standardized aircraft-related environment. Who is BS EN 4705 for? BS EN 4705 on measurement ...
Aerospace series. Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
- ICS
- 49.095
- CCS
- 发布
- 2020-02-29
- 实施
- 2020-02-29
What is BS EN 4726 - Aesthetical variations about? BS EN 4726 defines the inspection rules and the cosmetic acceptance criteria for surfaces of aircraft cabin equipment. Surfaces will be considered under the aspects of technical feasibility of the industrial design. BS EN 4726 outlines the framework between airlines, suppliers, and OEMs with regard to cosmetic issues. BS EN 4726 aims to:
Aerospace series. Acceptance parameters of aesthetical variations for all visible equipment installed in aircraft cabins under all contractual variations
- ICS
- 49.095
- CCS
- 发布
- 2019-04-30
- 实施
- 2019-04-30
1.1 This guide provides methodology to assist in interpreting results of air quality measurements conducted in aircraft cabins. In particular, the guide describes methodology for deriving acceptable concentrations for airborne chemical contaminants, based on health and comfort considerations. 1.2 The procedures for deriving acceptable concentrations are based on considerations of comfort and health effects, including odor and irritant effects, of individual chemical contaminants being evaluated. The guide does not provide specific benchmark or guidance values for individual chemicals to compare with results of air quality measurements. 1.3 Chemical contaminant exposures under both routine and episodic conditions for passengers and crew are considered. 1.4 This guide does not address airborne microbiological contaminants, which are also important in consideration of aircraft cabin air quality. This guide also does not address methodologies for investigations of air quality complaints. 1.5 This guide assumes that a list of chemical contaminants of potential concern has been developed based on existing concentration, emission, or material composition data. 1.6 The primary information resources for developing acceptable concentrations are databases and documents maintained or published by cognizant authorities or organizations concerned with health effects of exposure to contaminants. 1.7 Acceptable concentrations developed through this guide may be used as a basis for selecting test methods with adequate reliability and sensitivity to assess the acceptability of aircraft cabin environments. 1.8 Procedures described in this guide should be carried out in consultation with qualified toxicologists and health effects specialists to ensure that acceptable concentrations developed are consistent with the current scientific understanding and knowledge base. 1.9 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
- ICS
- 49.095
- CCS
- 发布
- 2018-04-15
- 实施
Aerospace series. Standardized passenger seat weight information
- ICS
- 49.095
- CCS
- V51
- 发布
- 2017-07-24
- 实施
- 2017-07-31
Aerospace series - Standardized passenger seat weight information
- ICS
- 49.095
- CCS
- 发布
- 2017-05-01
- 实施
Aerospace series. General and installation requirements for passenger seat fittings
- ICS
- 49.095
- CCS
- V25
- 发布
- 2016-04-30
- 实施
- 2016-04-30
This European Standard specifies the installation and removal requirements and the space envelopes for passenger seat fittings on aircraft. The purpose is to reduce the installation time and the tooling required for seat installation by standardizing the seat attachment fasteners (fittings).
Aerospace series - General and installation requirements for passenger seat fittings
- ICS
- 49.095
- CCS
- V11
- 发布
- 2016-04
- 实施
Aerospace series. Acceptance of the cosmetic variations in appearance of aircraft cabin parts
- ICS
- 49.095
- CCS
- V51
- 发布
- 2015-09-30
- 实施
- 2015-09-30
