59.140.10 加工和辅助材料 标准查询与下载

GB/T 38406-2019 皮革化学品 合成鞣剂中鞣质含量的测定

Leather chemicals—Determination of tannin content in synthetic tanning agents

GB/T 38407-2019 皮革和毛皮化学品 铬鞣剂中六价铬及还原性的测定

Leather and fur chemicals—Determination of chromium (VI) and the reductive potential for chromium tanning agents

GB/T 38411-2019 皮革化学品 皮革加工助剂中游离甲醛的测定

Leather chemicals—Determination of the free formaldehyde in leather process auxiliaries

GB/T 38410-2019 皮革化学品 鞣剂中鞣质含量的测定 过滤法

Leather chemicals—Determination of tannin content in tanning agent—Filter method

GB/T 24331-2009 制革用粉状铬鞣剂

本标准规定了皮革工业用粉状铬蹂剂的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以重铬酸钠为主原料，经葡萄糖或二氧化硫等还原，再配入助剂而制成的粉状铬鞣剂。

Chrome powder for tanning

GB/T 19940-2005 粉状铬鞣剂 六价铬离子测定方法

本标准规定了粉状铬鞣剂中六价铬离子含量的测定方法。 本标准适用于以重铬酸钠为原料，用硫酸等酸化，葡萄糖或二氧化硫（SO）等还原,或再配入助剂而制成的适用于制革主鞣或复鞣用的粉状铬鞣剂。

Chrome powder.Determination of chromium(VI)

GB/T 17928-1999 皮革 针孔撕裂强度测定方法

本标准规定了皮革针孔撕裂强度的测定方法。 本标准适用于各种皮革。

Leather--Determination of the stitch tear resistance

ASTM D3898-93(2023) 碱性铬鞣液中氧化铬的标准试验方法

Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors

ASTM D4906-95(2023) 皮革涂饰材料中总固体和灰分含量的标准测试方法

1.1  This test method covers the total solids and ash content of finishing materials. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials

ASTM D6182-23 皮革表面处理的柔韧性和附着力的标准试验方法

Standard Test Method for Flexibility and Adhesion of Finish on Leather

T/ZZB 3156-2023 制革用粉状铬鞣剂

本文件规定了制革用粉状铬鞣剂的产品分类，基本要求，技术要求，试验方法，检验规则，标志、包装、运输、贮存和质量承诺。 本文件适用于以重铬酸钠为主原料，经葡萄糖还原，再配入助剂而制成的粉状铬鞣剂。

Chrome powder for tanning

T/CLIAS 011-2023 制革用脱灰剂测试方法

本文件规定了制革工业生产使用的含铵（胺）和无铵脱灰剂的术语和定义、测试方法。

Test method of deliming agent for leather-making

T/CLIAS 008-2023 制革用聚（甲基）丙烯酸树脂复鞣剂测试方法

本文件规定了制革用聚（甲基）丙烯酸树脂复鞣剂的术语和定义、测试方法。

Test method of polyacrylic resin retanning agent for leather-making

T/CLIAS 010-2023 制革用中和剂测试方法

本文件规定了制革用中和剂的术语和定义、测试方法。

Test method of neutralizing agent for leather-making

T/CLIAS 009-2023 制革用氨基树脂复鞣剂测试方法

本文件规定了制革用氨基树脂复鞣剂的术语和定义、测试方法。

Test method of amino resin retanning agent for leather-making

DB13/T 5794-2023 毛皮碎料加工技术规范

Technical specifications for processing fur scraps

T/CNLIC 0048-2022 绿色设计产品评价技术规范 制革用复鞣填充剂

本文件规定了制革用复鞣填充剂绿色设计产品的评价要求，描述了生命周期评价报告编制方法、评价方法。  本文件适用于制革（含毛皮）用复鞣填充剂绿色设计产品的评价。

Technical specification for green-design product assessment －Retanning and filling agents for leather

ASTM D6657-16(2021) 湿蓝色和湿白色pH值的标准试验方法

1.1 This test method covers the determination of the pH of all types of Wet Blue and Wet White. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for pH of Wet Blue and Wet White

ASTM D6656-16(2021) 测定湿蓝色中氧化铬的标准试验方法（高氯酸氧化）

1.1 This test method covers the determination of chromic oxide in Wet Blue that has been partly or completely tanned with chromium compounds. In general, the samples will contain chromium content between 1 % and 5 % when calculated as chromic oxide expressed upon a dry basis otherwise referred to as moisture-free basis (mfb). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This test method does not apply to Wet White. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 9 for specific safety hazards. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)

ASTM D6183-00(2021) 皮革面漆粘性的标准试验方法

1.1 This test method is intended for use on finished leather to evaluate the tendency of cloth to adhere to it. This test method does not apply to wet blue. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Tackiness of Finish on Leather