肥料储存、制备和播撒设备标准-分析测试百科网

GB 10395.24-2010 农林机械安全第24部分：液体肥料施肥车

GB10395 的本部分规定了设计和制造各类半野挂式.牵引式和自走式液体肥料施肥车(以下简称“施肥车”),包括气动或机动液体肥料撒施或注射装置的安全要求和判定方法。本部分还规定了制造三应提供的安全操作信息的类型。本部分适用于半巧挂式.牵引式和自走式液体肥料施肥车。本部分未考虑环境方面因素。

Agricultural and forestry machinery.Safety.Part 24:Slurry tankers

ICS: 65.060.25
CCS: B91
发布: 2010-12-01
实施: 2011-10-01

GB 10395.3-2010 农林机械安全第3部分：厩肥撒施机

GB 10395的本部分规定了设计和制造各类厩肥撒施机的安全要求和判定方法，减小或消除危险方法的特殊要求，也规定了制造厂应提供的安全操作信息的类型。本部分适用于各类厩肥撒施机。本部分不适用于共性危险，特别是与移动相关，包括自走式机械相关的共性危险。本部分未考虑环境方面因素。

Agricultural and forestry machinery.Safety.Part 3:Manure spreaders

ICS: 65.060.25
CCS: B91
发布: 2010-12-01
实施: 2011-10-01

GB/T 25401-2010 农业机械厩肥撒施机环保要求和试验方法

本标准规定了农业和园艺用厩肥撒施机的设计、结构要求和试验方法。本标准的目的是减小对环境的破坏。本标准规定了厩肥撒施机横向和纵向施肥性能要求。本标准不适用于带式厩肥撒施机或泥肥撒施机。本标准中没有规定人身安全方面的要求。相关方面要求按GB 10395.3《农林机械安全第3部分：厩肥撒施机》的规定。

Agricultural machinery.Manure spreaders.Environmental protection.Requirements and test methods

ICS: 65.060.25
CCS: B91
发布: 2010-11-10
实施: 2011-03-01

GB/T 25418-2010 水稻覆土直播机

本标准规定了水稻覆土直播机的技术要求、安全要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于外槽轮式排种器、排肥器播种水稻同时施播基肥、覆肥的水稻覆土直播机。本标准性能试验内容可按直播机不同的功能及试验目的有所增减。

Rice direct seeder with soil cover

ICS: 65.060.25
CCS: B91
发布: 2010-11-10
实施: 2011-03-01

T/QGCML 3129-2024 SRC有机肥发酵装置

本文件规定了SRC有机肥发酵装置的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。本文件适用于SRC有机肥发酵装置的生产及检验。

SRC organic fertilizer fermentation device

ICS: 65.060.25
CCS: M751
发布: 2024-02-04
实施: 2024-02-19

GSO EN 13080:2024 农业机械.撒肥机.环境保护.要求和试验方法

This European standard specifies requirements for the environmental preservation and their verification for design and construction of manure spreaders for spreading manure in agriculture and horticulture. It specifies requirements for the transverse and longitudinal spreading characteristics such as acceptable working widths, steady flow, the stretch within the tolerance zone and the coefficient of variation for the longitudinal spreading. These requirements are limited to the evaluation of spreaders tested with manure as specified in table A.1. This standard is not applicable to manure band-spreaders or to sludge spreaders.

Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods

ICS: 65.060.25
CCS
发布: 2024-01-31
实施

GSO EN 690:2024 农业机械撒肥机安全

This European Standard, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled, mounted, semi-mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with vertical axes disc rear spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document. This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to manure spreaders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table 1), excepting the hazards arising from: - vibrations of self-propelled machinery; - travelling function of self-propelled machinery; - overturning in regard to the protection of the operator at the driving station of a self-propelled machine; - hazards related to conveying devices other than those defined in 3.3.1 and 3.3.2, for example load push/push-off device. NOTE 1 Regarding roll-over protection for self-propelled agricultural machinery, see EN ISO 16231-1. NOTE 2 This European Standard is neither applicable to environmental hazards nor to road safety. Environmental aspects are dealt with in EN 13080. This European Standard does not apply to manure spreaders with laterally mounted spreading device as defined in 3.6. This European Standard is not applicable to manure spreaders which are manufactured before the date of publication of this document by CEN.

Agricultural machinery - Manure spreaders - Safety

ICS: 65.060.25
CCS
发布: 2024-01-31
实施

GSO EN 13406:2024 农业机械泥浆罐车和撒播装置环境保护撒播精度要求和试验方法

This European Standard specifies requirements for the environmental preservation and their verification for design and construction of slurry tankers for broadcasting and band spreading of slurry in agriculture and horticulture. It specifies requirements for the transverse and longitudinal spreading characteristics such as acceptable working widths, steady flow and the stretch within the tolerance zone. These requirements are limited to tests with slurry as described in Annex A, table A.1.

Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision

ICS: 65.060.25
CCS
发布: 2024-01-31
实施

GSO EN 707:2024 农业机械泥浆罐车安全

This document, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document. This document, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to slurry tankers, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table A.1), excepting the hazards related to road safety (e.g. steering, braking). Environmental aspects have not been considered in this document. This document is not applicable to slurry tankers which are manufactured before the date of its publication as EN.

Agricultural machinery - Slurry tankers - Safety