共找到 31 条与 相关的标准,共 3 页
Rubber, unvulcanized -- Physical testing methods -- Part 3: Determination of plasticity and plasticity retention index (PRI) with rapid-plastimeter
Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
Rubber, raw natural, and rubber latex, natural. Determination of nitrogen content by Micro Dumas combustion method
This International Standard specifies a test method for the determination of nitrogen content of raw natural rubber using the Micro Dumas combustion method. This method is also applicable to natural rubber latex.
Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content by Micro Dumas combustion method
Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
이 표준은 인장 응력-변형 시험 그리고 표준 시험 조건에 따라 준비하거나 캘린더 시트에서
Raw rubber or unvulcanized compounds- Determination of green strength
Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC)
Raw rubber or unvulcanized compounds - Determination of green strength.
This International Standard specifies a method for the determination of the green strength of raw rubber or unvulcanized rubber compounds using a tensile stress-strain test, the test pieces being prepared following standard test conditions or cut from calendered sheets.
Raw rubber or unvulcanized compounds - Determination of green strength
This International Standard specifies a method for the determination of the green strength of raw rubber or unvulcanized rubber compounds using a tensile stress-strain test, the test pieces being prepared following standard test conditions or cut from calendered sheets.
Raw rubber or unvulcanized compounds - Determination of green strength
This International Standard specifies a method using the parallel-plate plastometer for the determination of the plasticity number and recovery number of uncompounded, compounded and reclaimed stocks of unvulcanized rubbers and rubber-like materials. NOTE The plasticity number and the recovery number are related to the viscoelastic properties of the material. The plasticity number is related to the flow properties and the recovery number is related to the elastic component. These are useful in predicting the processability characteristics, such as the ease of forming and die swell.
Rubber, raw and unvulcanized compounded - Determination of plasticity number and recovery number - Parallel-plate method
이 규격은 고무와 고무 라텍스를 과아이오딘산나트륨으로 산화시킨 후, 고무와 고무 라텍스의
Rubber and rubber latices-Determination of manganese content-Sodium periodate photometric methods
This International Standard specifies a method using a differential scanning calorimeter to determine the glass transition temperature of raw rubber.
Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
Rubber - Determination of solvent extract.
Rubber, raw and unvulcanized compounded - Determination of plasticity number and recovery number - Parallel plate method; Technical Corrigendum 1
Specifies procedures for sampling natural rubber latex and for sampling synthetic rubber latices and artificial latices. This Standard is identical with and has been reproduced from ISO 123:2001.
Methods of test for elastomers - Rubber latex - Sampling
This International Standard specifies photometric methods for the determination of manganese, after oxidation with sodium periodate, in rubbers and rubber latices. Both methods contain provisions for analysis of chlorine-containing rubber. Clause 3 specifies a method for compounded or vulcanized rubbers which is not affected by heavy loadings of fillers such as synthetic and natural silicates or calcium carbonates in various forms, or by the presence of compounding ingredients which form an insoluble phosphate under the conditions of the test. Clause 4 specifies a method for raw and compounded natural and synthetic rubbers and latices which do not contain heavy loadings (more than about 10%) of inert silicate fillers or any ingredient such as titanium dioxide which under the conditions of test will form an insoluble phosphate.
Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods
This International Standard specifies photometric methods for the determination of manganese, after oxidation with sodium periodate, in rubbers and rubber latices. Both methods contain provisions for analysis of chlorine-containing rubber. Clause 3 specifies a method for compounded or vulcanized rubbers which is not affected by heavy loadings of fillers such as synthetic and natural silicates or calcium carbonates in various forms, or by the presence of compounding ingredients which form an insoluble phosphate under the conditions of the test. Clause 4 specifies a method for raw and compounded natural and synthetic rubbers and latices which do not contain heavy loadings (more than about 10 %) of inert silicate fillers or any ingredient such as titanium dioxide which under the conditions of test will form an insoluble phosphate.
Rubber and rubber latices - Determination of manganese content - Sodium periodate photometric methods
Настоящий стандарт распространяется на бутадиеновые стереорегулярные синтетические каучуки и устанавливает метод определения массовой
Stereoregular butadiene synthetic rubbers. Method for determination of agidol-2 mass percentage
Настоящий стандарт распространяется на бутадиеновые стереорегулярные синтетические каучуки и устанавливает методы определения массово
Stereoregular butadiene synthetic rubbers. Method for determination of technical carbon mass percentage
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号