17180192385
虚拟号将在180秒后失效,请在有效期内拨打
若未完成电话咨询，您可提交留言咨询，厂商主动联系您
咨询列表
安捷伦科技（中国）有限公司
仪器简介：Cussons P7300 Impulse Swirl Meter’s are designed to measure swirl in the air flow drawn into an engine cylinder generated by the engine inlet port. Earlier methods of measuring swirl such as swirl vane meters, were dependent
on the velocity profile of the air stream, whereas the impulse type of meter overcomes this limitation by
responding to the total angular momentum flux in the swirling air flow. The impulse swirl meter uses a swinging
honeycomb type matrix which is restrained from rotation by a strain-gauged load cell to totally arrest the angular swirl component thereby measuring the resultant angular impulse as a torque.
SPECIFCATION
The P7300 comprises a honeycomb matrix mounted within a cylindrical housing, the dimensions of the individual cells
of the matrix being suitable for arresting the swirl of the incoming air. The matrix is connected via a torque arm to a
strain gauge transducer which is calibrated by suspending weights over pulleys either side of the torque arm.
The strain gauge transducer is rated at 220g, measured as a positive or negative force; the length of the torque arm is such as to enable torque values up to 1 x 10-1 Nm to be
measured. The unit can be arranged for flow in an upward or downward direction and is supplied complete with adaptor plate having a pilot bore of diameter 50 mm.
The P7302 display unit together with all the signal conditioning boards is contained in a steel case complete with carrying handle. If removed it can be mounted in a ½ rack case.
The front panel carries the 4 digit phosphorescent display, a mains on/off switch and zero and span potentiometers.
DESCRIPTION
The Aeroweb honeycomb matrix is suspended within a cylindrical, aluminium housing with the skirt of the matrix
immersed in an annular oil reservoir in the base which serves both as an air seal and a viscous damper. The matrix
is mounted on an axle in the frame and supported by precision ball bearings while the torque arm connected to the axle acts on a Wheatstone Bridge strain gauge transducer.
The unit is designed for blow or suction induced flow and can be assembled for operation in either the upward or downward mode, whichever is most convenient. A set of weights is provided with the instrument to facilitate static calibration of the strain gauge with an accuracy of ±2%.
Cussons Display Unit P7302, used in conjunction with the swirl meter, is a mains operated instrument complete with power supplies, which converts the strain gauge measurement into a four element, LED digital readout.
涡流动量计由科艺仪器有限公司 为您提供，如您想了解更多关于涡流动量计报价、参数等信息 ，欢迎来电或留言咨询。
注：该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案，不可用于临床诊断或治疗等相关用途。
