400-6699-117转1000
您好,欢迎您查看分析测试百科网,请问有什么帮助您的?
诚信认证:
工商注册信息已核实!参考报价: | 面议 | 型号: | IT 100 XL |
品牌: | 莱驰 | 产地: | 德国 |
关注度: | 13 | 信息完整度: | |
样本: | 典型用户: | 暂无 | |
供应商性质 | 生产商 | 产地类别 | 进口 |
仪器种类 | 研磨机 |
进样粒度 | < 76 mm / > 50 mm |
400-6699-117转1000
A detailed overview and knowledge of the characteristics of a raw material is of utmost importance, especially when planning the layout of a crushing plant. In order to minimize possible risks extensive trials are necessary to obtain information on the properties of the raw materials. A clear definition of the desired throughput capacity and product quality can be made in the planning phase with the help of Bond Index Testing.
The Bond Impact Tester IT 100 XL consists of two hammers mounted on a pendulum and is used for the determination of the Crushing Work Index (CWI). This index describes the competency of ores at larger particle sizes and serves to calculate the energy actually required for the crushing process. At least 10 samples, preferably 20, should be tested. Each broken stone has to pass a 3 inch square mesh and falls on a 2 inch square mesh.
The IT 100 XL Bond Impact Tester is available in a manual or automatic version and complies with the requirements defined by F. C. Bond.
优点
· adjustable crushing angle
· reproducible crushing results
· replaceable hammer tips
· 便捷的数据显示
· CE conform version
性能指标
应用 | 矿石和矿物的破坏特征量化 |
应用领域 | 地质 / 冶金, 建筑原料, 环境 / 资源回收利用 |
进料粒度* | < 76 mm / > 50 mm |
方孔 | 3" 和 2" |
破碎角 | adjustable from 10° up to 150° in steps by 5° |
批次加料量* | 可变 |
程序数量 | 20个样品 |
处理时间 | 可变 |
评估 | 计算所需的能量输入 |
电源数据: | 230 V, 50 Hz |
电源接头: | 单相 |
机体尺寸 (宽x高x纵深) | 2010 x 2160 x 500 mm |
净重 | ~ 370 kg |
标准 | CE |
Please note:
受样品材料性质和仪器配置/设定的影响
作用原理
The hammers are lifted, starting with a 10 degree angle. The rope is then released manually or automatically and the hammers fall down and strike the sample. The sample is checked for cracks and fissures, the number of broken fragments is noted down.
If the sample is still whole, it is again placed on the platform and the process is repeated, increasing the hammer release angle by 5 degrees with each repetition until the sample is broken.
根据技术改造和误差调整
Impact Tester IT 100 XL (Bond Index)信息由弗尔德(上海)仪器设备有限公司为您提供,如您想了解更多关于Impact Tester IT 100 XL (Bond Index)报价、型号、参数等信息,欢迎来电或留言咨询。
注:该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案,不可用于临床诊断或治疗等相关用途