400-6699-117转1000
您好,欢迎您查看分析测试百科网,请问有什么帮助您的?
诚信认证:
工商注册信息已核实!参考报价: | ¥1万-3万 RMB(人民币) | 型号: | ATP5330 |
品牌: | 奥谱天成 | 产地: | 福建 |
关注度: | 738 | 信息完整度: | |
样本: | 典型用户: | 暂无 | |
价格范围 | ¥1万-3万 | 光谱范围 | 可见 |
探测器类 | CCD |
杂散光 | <0.05% at 600 nm; <0.09% at 435 nm | 信噪比 | >600:1 |
分辨率 | 0.05-3 nm | 光谱范围 | 200-1100 nm (optimal design for >500 nm) |
动态范围 | 8.5 x 107 (system); 2000:1 单张采集 | 灵敏度 | 1300 V/(lx·s) |
400-6699-117转1000
石油的成油机理有生物沉积变油和石化油两种学说,前者较广为接受,认为石油是古代海洋或湖泊中的生物经过漫长的演化形成,属于生物沉积变油,不可再生;后者认为石油是由地壳内本身的碳生成,与生物无关,可再生。石油主要被用来作为燃油和汽油,也是许多化学工业产品,如溶液、化肥、杀虫剂和塑料等的原料。
ATP5330-制冷型、超薄、超高分辨率、M型光路光纤光谱仪
产品概述
ATP3330和ATP5330是奥谱天成新开发的一款超薄、制冷型、超高分辨率微型光谱仪,ATP3330和ATP5330是基于奥谱天成自主研发的M型光路结构,具有非凡的超高分辨率;同时,它采用制冷的2048或4096像素线阵探测器,达到了极致的超高分辨率,最高分辨率可达0.05nm,适用于各种高分辨率应用场合,同时具备高可靠性、超高速、低成本、高性价比等特性,可适应在线测试等各种环境用途的微型光谱仪。
ATP3330为非制冷的,ATP5330则采用TEC电制冷,制冷温度-5℃,大大降低了光谱仪的暗电流和噪声,提高了光谱仪的动态范围和信噪比,同时提高了光谱仪的环境适应性。ATP5330P则采用制冷背照式CCD,信噪比更优。
ATP3330和ATP5330可接收SMA905光纤输入光或者自由空间光,通过USB2.0或者UART端口,输出测量所得的光谱数据。
ATP3330只需要一个5V直流电源供电或直接从USB接口取电,非常便于集成使用。ATP5330则需要额外的5V电源。
探测器制冷? | 探测器像素 | |
ATP3330 | 否 | 2048 |
ATP3334 | 否 | 4096 |
ATP5330 | 是,-5℃ | 2048 |
ATP5334 | 是,-5℃ | 4096 |
ATP5330P | 是,-10℃,背照式CCD | 2048 |
特征
M型光路,更高分辨率;
光谱范围: 200-1100 nm;
光谱分辨率: 0.05 ~ 3 nm;
光路结构: 非交叉C-T;
检测器: 2048或4096像素;
探测器制冷温度:-5 ℃
积分时间: 0.1ms ~ 256s;
供电电源: 直流5V 供电;
ADC位深:16位;
数据输出接口:USB Type-C;
20针扩展接口;
应用领域
LIBS、等离子体发光检测;
拉曼光谱检测;
波长监测,激光、LED等发光体
水质分析仪
LED分选机、颜色检测;
光谱分析、辐射分光分析、分光光度分析
反射、透射光谱检测
Specifications
Detector | |
Type | Linear array detector |
Detectable range | 200-1100 nm |
Effective pixel | 2048 or 4096 pixels |
Sensor Cooled | TEC cooled, -5 ˚C |
Pixel dimension | 14μm × 200μm |
Sensitivity | 1300 V/(lx·s) |
Dark noise | 13 RMS @ 13 ˚C |
Optical Parameter | |
Wavelength range | 200-1100 nm (optimal design for >500 nm) |
Optical resolution | 0.05-3 nm |
Signal-to-noise | >600:1 |
Dynamic range | 8.5 x 107 (system); 2000:1 for a single acquisition |
Stray light | <0.05% at 600 nm; <0.09% at 435 nm |
Optical Configuration | |
Optical Design | Traditional Czerny-Turner, M-shape light path |
Focal Distance | 75mm |
Incidence slit | 50 μm (10, 25, 100, 200 μm are optional) |
Incident Interface | SMA905 connector |
Electrical Parameter | |
Integration time | 0.1 ms - 256 second |
Interfaces | USB Type-C |
A/D conversion resolution | 16 bit |
Supply voltage | DC 4.5 to 5.5 V (type @5V) |
Operating current | ATP3330:200mA,ATP5330:1.5 A@Typ. 3A Max |
Storage temperature | -30°C to +70°C |
Operating temperature | -25 ~ 50 oC |
Working humidity | < 90%RH |
Physics Parameter | |
Dimension | 125 × 90 × 32 mm |
weight | 500 g (ATP3330),670 g (ATP5330) |
2 Mechanical Diagrams
3 Electrical Pin-out
Table 1 Electrical Characteristics
Parameter | Min | Typ | Max | Unit |
Power Supply | ||||
Operating voltage range | 4.5 | 5 | 5.5 | V |
Operating current | 170 | mA | ||
Logic Inputs(3.3V LVTTL, Five-volt tolerant) | ||||
High level input voltage | 1.7 | 3.6 | V | |
Low level input voltage | -0.3 | 1.0 | V | |
Logic Output(3.3V LVTTL) | ||||
High level output voltage | 2.4 | V | ||
Low level output voltage | 0.4 | V |
The module is equipped with a 30-pin male angled box header(2x15, 2.00 mm pitch) and Type-C interface.
Table 2 Electrical Pin-Out
Pin# | Description | I/O | Function Description |
1 | VCC | / | Power Supply, 5V±0.5, |
2 | GND | / | Ground |
3 | UART_TX | Output | UART Transmit signal |
4 | UART_RX | Input | UART Receive signal |
5 | Lamp_En | Output | LVTTL output the lamp enable signal. |
6 | Continuous_strobe | Output | LVTTL output the continues strobe signal. |
7 | Ext_trigger_in | Input | LVTTL input the trigger signal. |
8 | Single_strobe | Output | LVTTL output the single strobe signal. |
9 | SPI_SCK | Output | The SPI Clock signal for communications to other SPI peripherals |
10 | SPI_MOSI | Output | The SPI Master Out Slave In (MOSI) signal for communications to other SPI peripherals |
11 | SPI_MISO | Input | The SPI Master In Slave Out (MISO) signal for communications to other SPI peripherals |
12 | SPI_CS | Output | The SPI Chip/Device Select signal for communications to other SPI peripherals |
13 | GPIO0 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
14 | GPIO1 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
15 | GPIO2 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
16 | GPIO3 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
17 | GPIO4 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
18 | GPIO5 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
19 | GPIO6 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
20 | GPIO7 | Input /Output | General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. |
4 Order Guide
Order number Rules:
Model | Spectral region | Slit width | |
ATP5030 | Short wavelength | Long wavelength | Slit width |
For example:
What to buy ATP5030, spectral region: 200-1000nm, slit width is 50 um, then the order no is:
ATP5030-200-1000-050
Order No | Spectral region | Slit |
ATP5030-200-400-### | 200~400 | 10 μm25 μm50 μm100 μm200 μmOther:______μm |
ATP5030-200-850-### | 200~850 | |
ATP5030-200-1000-### | 200~1000 | |
ATP5030-340-850-### | 340~850 | |
ATP5030-600-1100-### | 600~1100 | |
ATP5030-###-###-### | Other |
奥谱天成 ATP5330 M型光路光纤光谱仪 用于测量石油产品成分信息由奥谱天成(厦门)光电有限公司为您提供,如您想了解更多关于奥谱天成 ATP5330 M型光路光纤光谱仪 用于测量石油产品成分报价、型号、参数等信息,欢迎来电或留言咨询。
注:该产品未在中华人民共和国食品药品监督管理部门申请医疗器械注册和备案,不可用于临床诊断或治疗等相关用途