规格
| Per 10-inch Cartridge | |
| Filtration Area | |
| Double Layer | 0.46 m² |
| Materials of Construction | |
| Filter media | Mixed Cellulose Esters (MCE) |
| Prefilter media | Borosilicate Glass Fiber (BGF) |
| Supports | Spun bonded polypropylene |
| Structural components | Polypropylene |
| O-rings | Silicone (SI) |
| Maximum Differential Pressure, bar (psid) | 3.5 bar (50 psid) @ 25 °C |
| Gravimetric Extractables | The extractables level was equal to or less than 140 mg per 10-inch cartridge after 24 hours in water at controlled room temperature. |
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L |
| Bacterial Endotoxins | Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Sterilization | 10 autoclave cycles or SIP @ 121 °C for 30 min |
| Sanitization | 30 min with hot water @ 80 °C |
| Component Material Toxicity | Component materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride extraction. |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Non-Fiber Releasing | Component materials meet the “non-fiber releasing“ criteria as defined in 21 CFR 210.3 (b) (6). |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. |
Typical Clean Water Flow Rate vs Pressure Drop
Cartridges with Polysep II Media —1.0/0.2/0.1 µm Nominal (W1)
Cartridges with Polysep II Media —1.0/0.2 µm Nominal (W3)
Cartridges with Polysep II Media —1.0/0.5 µm Nominal (W6)
Cartridges with Polysep II Media —1.0/1.2 µm Nominal (W2)
Cartridges with Polysep II Media —2.0/1.2 µm Nominal (W9)
请扫描二维码查看详细参数
经销商
|
除厂家/中国总经销商外，我们找不到 默克密理博Polysep Ⅱ过滤器 的一般经销商信息，有可能该产品在中国没有其它经销商。
如果您是，请告诉我们，我们的邮件地址是：sales@antpedia.net 请说明: 1.产品名称 2.公司介绍 3.联系方式 |
过滤器、超滤、微滤系统
售后服务
我会维修/培训/做方法
如果您是一名工程师或者专业维修科学 仪器的服务商，都可参与登记，我们的平台 会为您的服务精确的定位并展示。
