规格
| Materials of Construction | |
| Device: | Polypropylene Polyethylene Regenerated cellulose (Pellicon 3 cassette with Ultracel membrane only) Thermoplastic elastomer Stainless steel (0.57 m² and 1.14 m² cassettes only) |
| Ultracel Membrane: | Composite regenerated cellulose (regenerated cellulose membrane cast on a microporous polyethylene membrane) |
| Biomax Membrane: | Biomax polyethersulfone void-free membrane |
| Assembly Design: | Automated assembly and testing of heat-sealed packets bound together by an injected molded polypropylene jacket. |
| Regulatory Information | |
| Component Material Toxicity: | Component materials were tested and meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. |
| Good Manufacturing Practices: | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| ISO® 9001 Quality Standard: | This product was manufactured in a facility whose Quality Management System is approved by an accredited registering body to the appropriate ISO 9001 Quality Systems Standard. |
| 100% Integrity Tested in Manufacturing: | Each unit must pass an integrity test based on air flow through the fully-wetted membranes of the filter. |
| Validated Production Process: | This product was fabricated using a validated manufacturing process. Principles of statistical process control and determinations of process capability have been applied to critical variables in the device fabrication process. In-process controls are used to assure stability of the process. |
| Operating Conditions | ||
| Pellicon® 3 Cassettes with Ultracel Membrane | Pellicon® 3 Cassettes with Biomax Membrane | |
| Recommended Feed Flow Rate | 4 – 8 L/m²/min | 4 – 6 L/m²/min |
| Pressure/Temperature | 40 psi (2.7 bar) @ 50° C | 80 psi (5.5 bar) @ 40° C |
| Maximum Reverse Pressure | 30 psi (2 bar) | 30 psi (2 bar) @ 25° C |
| Maximum Caustic Concentration | 0.5N NaOH up to 50 hours (Contact Millipore for exposure parameters) | 1.0N NaOH up to 200 hours |
| Operating pH Range | 2 – 13 | 1 – 14 |
请扫描二维码查看详细参数
经销商
|
除厂家/中国总经销商外，我们找不到 默克密理博Pellicon 3 Biomax 盒式超滤膜包 的一般经销商信息，有可能该产品在中国没有其它经销商。
如果您是，请告诉我们，我们的邮件地址是：sales@antpedia.net 请说明: 1.产品名称 2.公司介绍 3.联系方式 |
过滤器、超滤、微滤系统
售后服务
我会维修/培训/做方法
如果您是一名工程师或者专业维修科学 仪器的服务商，都可参与登记，我们的平台 会为您的服务精确的定位并展示。
