默克密理博K-Prime层析系统

tel: 400-6699-117 转 1000

Milli-Q蛋白质纯化系统, 专为蛋白类药物及其他生物工程类产品的分离所设计的小型生产规模的系统，流速范围每分钟20ml 至10L。......

在线客服

参数指标

我要提交参数指标我要纠错

规格

Flow Rate¹	40-I	40-II	40-III
Per minute	20 – 500 mL (1.2 – 30 L/hr)	0.1 – 3.0 L	1 – 10 L
Pressure Rating	Up to 7 Bar (102 psig)
Temperature Range
Ambient:	+2 to 30 °C
Flow Stream (temperature range for operating at maximum pressure rating):	+2 to 30 °C
Process Connection Type	¾ inch sanitary clamp (accommodates both ¾ in. and ½ in. fittings)
Pipework Inside Diameter	3 mm bore	10 mm bore pre-pump 6 mm bore post-pump	10 mm bore
Buffer/Solvent Inlets	Four inlets with gradient capability
Gradient Capability	Two component buffer Isocratic or linear mix; six binary mix combinations
Mix Range:	10 – 90%
Accuracy:	± 2% FS of either buffer
Reproducibility:	± 1%
Hold-up Volume
Buffer to Waste:	75 mL	250 mL	1.45 L
Sample to Column:	35 mL	150 mL	1.2 L
Bubble Trap (Full):	550 mL	550 mL	2.0 L
Humidity	5 – 95% (non-condensing)
Utility Requirements
Compressed Air:	≥ 6 bar instrument air filtered to ≤ 5 micron, -20 °C dew point, oil free.
Maximum Consumption:	~ 8 L/min (0.3 SCFM)
Electrical Supply²:	Single Phase 100, 120, 240 volts 50/60 Hz
Power Consumption:	~ 1 kVA
Connection:	Push fit socket for 10 mm OD tube on cabinet
Fraction Ports	3 or 5 or 10
Dimensions
Height:	1270 mm (50 in.)	1270 mm (50 in.)	1270 mm (50 in.)
Width:	686 mm (27 in.)	686 mm (27 in.)	686 mm (27 in.)
Depth:	1042 mm (41 in.)	1042 mm (41 in.)	1499 mm (59 in.)
Uncrated Weight	170 kg (375 lbs)	190 kg (419 lbs)	260 kg (573 lbs)
Wetted Materials	316 L SST, PP, EPDM, PTFE resin, PFA, PVDF, TPX, Quartz, Titanium, Santoprene® elastomer and CHEM-SURE™ tubing (K-Prime 40-III only)
Electrical Enclosure	IP 56 (NEMA 4X)
¹ Under specified conditions. Refer to user manual. ² Voltage configured at time of order.