| Model | CP100NX | CP90NX | CP80NX |
|---|---|---|---|
| Max. Speed (rpm) | 100,000 | 90,000 | 80,000 |
| Max.RCF (xg) | 803,000 (P100AT2) | 700,000 (P90AT) | 615,000 (P80AT) |
| Speed Control Accuracy | ±2 rpm (1,000 rpm to max. speed) | ||
| ACCEL/DECEL Mode | ACCEL : 10 / DECEL : 11 (10 and coasting) | ||
| Set Speed Range | 1,000 rpm to max. speed in increments of 100 rpm | ||
| Timer | from 1 min to 999 hours 59 min (with 1 min increments) with HOLD function | ||
| Set Temperature Range | from 0ºC to 40ºC with 1ºC increments (Accuracy : +/- 0.5ºC) | ||
| Vacuum System | Oil rotary vacuum pump and oil diffusion pump | ||
| Operating Sound | 51dB(A) (running at set speed, under in-house test condition) | ||
| Heat Radiation Into a Room | 1kW or below | ||
| Cooling System | Thermo-module cooling system (CFC/HCFC/HFC-free) | ||
| Control Panel | Touch-sensitive color LCD panel (6.5 inch) | ||
| Data Communication | USB : Host x 1, Devise x 1 / LAN x 1 | ||
| Rotor Life Management | Automatic Rotor Life Management for rotors with RLM adapter Registered by serial number to the system for rotors with optical overspeed disk | ||
| Size (mm) | 790 (W) x 690(D) x 880(H) (with door cover : 890(D)) Max. height to the end of the door handle : 925(H) / Height to the table : 863(H) | ||
| Floor area (m2) | 0.81 (900 x 900 mm) | ||
| Weight (kg) | 390 | ||
| Power | Single phase, AC200V, 208V and 220V +/-10%, Max. 20A (normally 8A) Single phase, AC230V and 240V +/-10%, Max. 16A (normally 7A) | ||
| Installation Environment | Ambient temperature for operation : 2ºC to 40ºC Ambient temperature for performance guarantee : 10ºC to 30ºC | ||
| Standard | CE marking qualified Product Safety : EN61010-1 and EN 61010-2-020 Electromagnetic Compatibility : EN 61326-1 | ||
| Warranty of Drive Unit | 10 years after the shipment (Full warranty) *1 | ||
| Part No. (Asia/Middle East) | 901067C1 | 901068C1 | 901069C1 |
| Part No. (EU market) | 901067C2 | 901068C2 | 901069C2 |
| Part No. (USA/Canada) | 901067C3 | 901068C3 | 901069C3 |
| Catalog | CP-NX SERIES catalog (PDF:2,100KB) | ||
Limited to appropriate operation after the installation by our authorized engineer.please refer to the operation manual for detailed conditions.)
CP-NX series is not registered as medical device in Japan.
Due to safety reasons, installation environments, operation environments and conditions may be restricted.
zei大离心力
803,000g
典型配置
角转子离心机
仪器功能
冷冻离心机
仪器种类
落地式离心机
产地类别
进口
离心等级
生物大分子
特征参数
超高速离心机
主要特点：
●驱动部十年免费保用。
●转速100,000rpm，离心力803,000g,
●温度设定范围：0~+40℃，1℃步进。
●转头温度控制精度：±0.5℃，利用红外检测器监测温度；采用串并联半导体制冷模块
●LED显示器：面板前部具有一个47cm长的LED显示器，可呈现不同的颜色，发光模式，亮度，以显示不同的操作状态
●LCD彩色触摸屏：6.5英寸，触摸式操作，具备离心力，离心时间的适时设定功能。触摸屏显示语言有11种可选，包括中文，英语，日语，等
●程序化操作：可存储多达1000个程序（30个步骤的）。
●标准接口：USB (x2), LAN (x1)。
●操作历史：多达5120个操作历史可通过USB口，以CSV的形式输出
●具有用户锁功能，可注册多达50个操作者
●具备转头寿命的自动管理转头可选，自动延长功能。
| 经销商 | 电话 | 咨询 |
|---|---|---|
| 天美仪拓实验室设备（上海）有限公司 | 400-6699-117 转 6651 | 向他咨询 |
售后服务
我会维修/培训/做方法
如果您是一名工程师或者专业维修科学 仪器的服务商，都可参与登记，我们的平台 会为您的服务精确的定位并展示。
