我的咨询

您好,欢迎您查看分析测试百科网,请问有什么帮助您的?

稍后再说 立即咨询
咨询列表
Batop
X
头像

客服中心

如果企业客服不在线,也可拨打400电话联系。或者发布求购信息

400-6699-117转1000
发布求购 平台客服
扫码下载
"来会会"App
扫码关注
分析测试百科网
您现在所在的位置:首页 >> 仪器导购 >> 激光器>> Batop SA 可饱和吸收体

Batop SA 可饱和吸收体

tel: 400-6699-117 1000

Batop激光器, 本产品操作简单,使用便捷。

咨询留言

技术特点

【技术特点】-- Batop SA 可饱和吸收体

Batop SAM 可饱和吸收体


内容:

微芯片安装

工作原理

脉冲能量Ep

重复率frep

脉冲宽度tp


微芯片安装

上图所示是的被动调Q的单片微片激光器由Nd掺杂YVO4激光晶体和可饱和吸收镜(SAM)粘合在一起组成。激光腔体长度L在区域100μm..300μm主要由激光晶体厚度决定。典型掺Nd是2&或3%。 来自一个连续二极管激光的线性极化808nm泵浦光平行面向c轴自动对焦激光晶体。激光晶体中的一个典型的泵浦光斑直径约为50μm-100μm。1064nm波长单模激光输出光脉冲是从分色镜中反射出。


微芯片的主要特性取决于以下参数:


脉冲能量Ep

重复率frep

脉冲宽度tp



工作原理


可饱和吸收体(SAM)作为被动调Q开关。 对波长为1064nm的激光来说低强度非饱和SAM反射率在0.75-0.9的区域。激光晶体的连续泵浦上部将被填补直到获得足够大的自发辐射。然后SAM饱和,激光器发出一个强大的短脉冲。 在连续泵浦期间,发展重复,重复频率德国财务报告管理小组inceasing与泵浦功率密度接近线性关系。由于光能量的一部分是在SAM的吸收层消退,安排必须删除此芯片产生的热量。如果激光腔长度短,单模激光泵浦光斑直径小。


pulse energy Ep

According to the well established formalism (Journal of the Optical Society of America B, Vol. 16, Issue 3, pp. 376-388, 1999) of passive Q-switched microchip laser the pulse energy Ep can be estimated as follows:

formula pulse energy Ep

                                           with

                                                  Fsat,L          saturation fluence of the laser material

                                                    A              pump spot area in the resonator

                                                   ΔR             modulation depth of the SAM

                                                    T              transmission of the output coupler  

                                                  Ans             non-saturable losses, mainly from SAM

With typical values Fsat,L = 37.3 mJ/cm2, A = 1.3x10-5cm2 ( 40 μm spot diameter), ΔR = 0.1, T = 0.1, and loss = 0.05 the pulse energy can be estimated to Ep ~ 32 nJ.

repetition rate frep

The average output power Pav is proportional to the pump power. Therefore the repetition rate shows a linear behavior by changing the pump power according to:

formula repetition rate


with

           ηs              slope efficiency   

           Pp              pump power   

           PP,th          pump power threshold



By changing the pump power PP repetition rates between 100 kHz and 2 MHz can be realized with a nearly constant pulse energy EP. Because the pulses start with spontaneous emission, the repetition rate shows a time jitter of about 1 %, increasing with decreasing pump power and rate.


pulse duration tP

The pulse duration tP in passive Q-switched lasers can be estimated by:

formula pulse duration

                                     with     

                                                   TR                               resonator round trip time

                                                   ΔR                               modulation depth of the SAM     

                                                    n                                refractive index of the resonator material    

                                                    L                                resonator length     

                                                    c                                speed of light in vacuum.

With a short laser crystal length L = 0.2 mm, refractive index n ~ 1.95, and a SAM modulation depth of ΔR = 0.1 the pulse duration is about 91 ps.




【技术特点对用户带来的好处】-- Batop SA 可饱和吸收体


【典型应用举例】-- Batop SA 可饱和吸收体



售后服务

我会维修/培训/做方法

如果您是一名工程师或者专业维修科学 仪器的服务商,都可参与登记,我们的平台 会为您的服务精确的定位并展示。

1该产品的品牌知名度如何?
2你对该产品的使用感受如何?
3该产品的性价比如何?
4该产品的售务如何?
查看
在线咨询

在线咨询时间:

周一至周五

早9:00 - 晚17:30

若您在周六周日咨询,请直接留言您所咨询的产品名称+联系人+电话