X
您需要的产品资料:
选型配置
产品样品
使用说明
应用方案
公司录用
其他
个人信息:
提交

您好,欢迎您查看分析测试百科网,请问有什么帮助您的?

稍后再说 立即咨询
您现在所在的位置:首页 >> 仪器导购 >> 同位素质谱仪>> Sercon HS2022稳定同位素质谱仪

Sercon HS2022稳定同位素质谱仪

tel: 400-6699-117 7878

SerCon同位素质谱仪, 高准确度和精度;连续流方式可测量2H;20-22稳定同位素比质谱仪是专为连续流技术设计的同位素比质谱仪。......

在线客服



分辨率:m/∆m ≥ 110

质量范围:1-96 amu

测量范围:HD、13C、15N、18O、34S

测试精度:13C<0.1

Sercon Ltd., U.K  is the only dedicated manufacturer of Stable Isotope Mass Spectrometers and their associated sample preparation systems for Isotope Ratio Mass Spectrometry (IRMS Instrumentation). Sercon also provides Stable Isotope labelled compounds.


Backed by a wealth of experience in Isotope Ratio Instrumentation, Sercon provides a full range of services specific to isotope ratio scientists and their applications.


Sercon manufactures a family of Stable Isotope Mass Spectrometers; Continuous Flow and Dual Inlet IRMS.

Other modules available are:

  • 13C and 15N Analysers,

  • Automated Breath Carbon Analysers,

  • Elemental analysers,

  • Sample Preparation systems for gaseous, solids and Liquids,

  • Gas Chromatographic interface - GC Combustion/ Pyrolysis systems,

  • Cryogenic Gas purification and concentration systems,

  • TOC- Cryo-prep device for high precision 13C analysis from dissolved carbon,

  • High temperature elemental analyser system,

  • Carbonate Acid preparation system,

  • Water Equilibration system  and

  • Customised Sample Preparation devices.

指标参数: 

1、Geometry 

120° extended geometry with an 11 cm radius magnetic sector giving an effective 21 cm radius dispersion and double direction focusing. Truly universal Faraday triple collectors for simultaneous collection of adjacent masses in range 28, 29, 30 - 64, 65, 66 with no adjustment of collectors or amplifiers. Additional long spur with 98.8° sector which creates a distance of 24 cm between the focal points for m/z 2 and 3. Additional single Faraday collector for m/z 3. 

2、Materials 

All stainless steel construction with metal gasket seals to ensure ultra clean internal environment. The use of all metal permits bake out of the analyser and negligible water background. Industrial sealing technology (conflat flanges) means no dead volumes within ion optics so eliminating contamination and memory effects. 

3、Ion source 

High sensitivity, electron impact, plug-in design. 

4、Magnet 

Programmable electromagnet. 

5、Resolution

 m m= 90 (N2 ) 10% valley definition. m m= 40 (H2 ) 10% valley definition.

6、 Sensitivity

 < 1000 molecules per m/z 44 ion. < 10000 molecules per m/z 2 ion. 

7、Abundance Sensitivity 

< 5 ppm for N2 , < 30 ppm for CO2 < 1 ppm for H2 at 4 x10-6 mbar He in continuous-flow mode. < 10 ppm for CO2 - dual-inlet mode. 

8、Linearity < 0.03‰ / nA at beam intensity of 2 x10-8 A for CO2 

9、H3+ 

<5 ppm / nA. Stability < 0.03 ppm/nA/hour.

10、 Sample Decay 

Time for a signal of 2E-8 Amps for m/z 44 to decay below 2E-10 Amps when inlet is isolated. Continuous flow mode = 30 seconds 

11、Vacuum 

Mass analyser - truly differentially pumped by 2 x drag stage turbomolecular pumps (70 L/s) backed by two-stage rotary pumps. Ultimate vacuum of 1 x 10-9 mbar. Source pressure monitored by inverted magnetron gauge. (Nb. this configuration is essential for GC-C-IRMS applications). 

12、Inlet 

Zero dead volume capillary interface to allow the use of continuous flow methods e.g. ANCA-MS and GC-C-IRMS. 

13、Data acquisition system 

Data acquisition system uses state of the art highly stable and linear high frequency converters which produce integral slices with zero dead time and quantisation below the beam statistical noise floor at all signal levels. 

14、Software 

Sercon Callisto software. Proprietary operational software for system control and data handling. Fully compatible with all versions of Windows, currently systems are installed with Windows 7. 

15、Electronics 

Sercon System Controller. Flashover-resistant electronics with semiconductors close to ground and isolated from high voltages. Full control of ion source parameters through software and on-board microprocessors. Communication is via USB with PC system. Valve control outputs for 32 valves as standard, can be extended to 64. Four VFC channels for ion beam and other detector readbacks are installed, extendable to eight or twelve depending on system configuration. 

16、Refgas 

Triple-port reference gas injection system to calibrate sample peaks produced by attached continuous flow modules. Fitted with dedicated pneumatic valves and inlet manifold for 3 reference gas bottles. Reference valve array can be expanded to six or more reference gases if required. 

17、Basic unit comprises 

20-22 mass spectrometer. Fitted with a triple and single collector for 13C, 15N, 18O and 2H, and electromagnet.

18、Precision 

Precision analysis will always yield an SD better than presented below for 5 injections of gases at natural abundance. Major beam of 10 nano amps.


参考0730-1561GDBJ0501:

第1包 第1品目

气相色谱-稳定同位素质谱联用仪(河北局)

序号

条款类别

条款号

技术指标需求



一、工作条件


1.1

环境温度:18℃-28℃



1.2

相对湿度:20% - 70%



1.3

电源电压:230V±10%, 16A\50Hz单相,电压必须无火花,地线和中线之间相差电压<400mV


二、技术指标


2.1

质谱部分



2.1.1

稳定同位素质谱主机:用于测定高精度的C、H、N、O、同位素丰度比值测量的质谱仪,由以下部分组成:



2.1.1.1

离子源:高灵敏度电子轰击源;



2.1.1.2

离子源室:为无焊缝整块不锈钢,可烘烤到90℃;



2.1.1.3

分析器:为无焊缝整块不锈钢;


#

2.1.1.4

真空系统:带有涡轮分子泵和前级真空泵的自动真空系统,真空度可达到10-8mBar;



2.1.1.5

离子光学:扇形磁场能同时测定所有气体,100%传输所有离子束。能用计算机控制磁场和加速电压;



2.1.1.6

接收器包括以下配置:



2.1.1.6.1

万用三杯接收器,由若干窄缝和宽缝法拉第杯组成,能实现CO₂ (44, 45, 46), O₂ (32, 33, 34),N₂ (28, 29, 30) , NO (30, 31, 32)或SO₂ (64, 66)检测;


*

2.1.1.6.2

H/D接收器:可以实现H/D检测,同时能实现m/z 3的检测,可配合其他接收器使用。


*

2.1.2

质量数范围:  1-70   dalton;


*

2.1.3

分辨率:m/Δm≥110 (10%峰谷);


#

2.1.4

绝对灵敏度:≤1200 molecules/Ion (连续流模式);



2.1.5

离子源线性:0.03‰/nA;


#

2.1.6

H3+因子:<10ppm/nA,稳定性好于0.03ppm/nA/H;


#

2.1.7

质谱主机精度:

Gas          Reference Gas      

            (‰ vs   ref)         

CO₂ (13C)      0.08           

CO₂ (18O)      0.08           

N₂               0.06           

SO₂ (34S)      0.1            

H₂               0.5   



2.2

元素分析仪及接口



2.2.1

普通温度元素分析仪及接口,能将固、液体样品转换成 CO₂, N₂, SO₂,并通过接口引入质谱仪精确测定13C/12C, 15N/14N,34S/32S同位素比和 C,N的元素含量。



2.2.1.1

氧化炉温度:≤1100℃;



2.2.1.2

还原炉温度:≤1100℃;



2.2.1.3

柱温箱温度:≤250℃;


#

2.2.1.4

固体自动进样器:不少于120位;


#

2.2.1.5

元素分析外精度:
  N₂ (15N) 0.2‰ 
  CO₂ (13C) 0.15‰ 
  SO₂ (34S) 0.3‰


*

2.2.2

高温裂解元素分析装置及接口,能将固、液体样品转换成 CO和H₂, 并通过接口引入质谱仪精确测定18O/16O, D/H 同位素比。


#

2.2.2.1

高温裂解温度:不低于1450℃;


*

2.2.2.2

液体自动进样器


#

2.2.2.3

高温裂解元素分析装置外精度:

2H    2.0‰

18O   0.2‰   



2.3

专用气相色谱及其接口



2.3.1

专用气相色谱



2.3.1.1

进样口:分流/不分流毛细柱进样口(带电子气路控制);

可编程电子参数设定压力、流速、分流比;

具有恒流,恒压,程序增加流速,程序升压,脉冲压力进样等操作模式的电子气路控制;

zei高设定温度:450℃;

压力设定范围:0~100 psi,控制精度:0.01 psi;



2.3.1.2

柱温箱:


#

2.3.1.2.1

温度范围:室温+5℃-450℃;

zei大升温速率:全温度范围内zei大升温速度120℃ /min;

程序升温平台:≥6阶;

温度稳定性:<0.01℃每1℃环境变化;

降温速度:柱箱温度从400℃降至50℃,少于4.5min;



2.3.1.3

检测器:FID检测器;


#

2.3.1.3.1

灵敏度:FID≤5pgC/sec(丙烷),线性动态范围:≥107



2.3.1.4

自动进样进样器

不低于100位瓶位;

进样量范围:0.1-50µL;

进样重复性:<0.4% RSD。



2.3.2

专用接口:用于正确和精密在线测定有机混合物中单体化合物的碳、氮、氢、氧同位素比;


#

2.3.3

外精度:
  CO₂ (13C)     0.2‰
  CO₂ (18O)     0.8‰
  N₂ (15N)     0.5‰
  H₂ (2H)      3.0‰


三、售后服务与培训


3.1

售后服务与国内培训:国内有售后服务中心,能提供良好的售后支持,并及时提供零备件。免费提供现场培训,内容包括:仪器工作原理、结构、仪器操作步骤、实验程序、软件操作、仪器维护和简单维修等;



3.2

设备出现故障8小时之内响应。如故障无法排除,工程师24小时内到达现场排除故障;



3.3

保修期内每年提供不少于5次的使用和日常维护现场培训。


四、验收


4.1

验收:按照技术要求共同验收


五、数量


5.1

一台套


六、交货地点


6.1

交货地点:用户指定国内地点。


七、交货期

*

7.1




厂家资料

地址:北京市顺义区空港工业区B区安庆大街6号

电话:400-6699-117 转 7878

经销商

售后服务

我会维修/培训/做方法

如果您是一名工程师或者专业维修科学 仪器的服务商,都可参与登记,我们的平台 会为您的服务精确的定位并展示。

1该产品的品牌知名度如何?
2你对该产品的使用感受如何?
3该产品的性价比如何?
4该产品的售务如何?
查看
在线咨询

在线咨询时间:

周一至周五

早9:00 - 晚17:30

若您在周六周日咨询,请直接留言您所咨询的产品名称+联系人+电话