热变形、维卡软化点温度测定仪技术参数：

1）控温范围：室温～300℃

2）最大温度误差：±0.5℃      

3）升温速度：50℃/h、120℃/h

4）温度测量点：1个

5）试验架数：6个

6）变形测量范围：0～10mm    

7）最大变形误差：±0.005mm

8）试样支承跨距：64mm(平放优选)、100mm（侧立）

9）具有上限温度保护功能；

10）控制方式采用单片机和PC机分布式控制系统；    

12）具有试样架自动升降系统；

13）使用介质：甲基硅油或变压器油；

14）冷却方式：150℃以上自然冷却，150℃以下水冷却或自然冷却。

13）外形尺寸：920X400X1300mm

 热变形、维卡软化点温度测定仪配置：

   1）主机                        一台                       

2）试样架                      六个

3）热变形压头                  六个

4）维卡压针                    六个

5）高精度位移传感器            六支

6）品牌台式计算机              一台

7）彩色喷墨打印机              一台

8）中文版下操作系统的试验软件  一套

9）电源线                      一根

10）信号线                     一根

11）砝码                       一套

亲以下为英文简介

Thermal deformation softening point temperature measuring instrument, VEKA function, scope of application:

Mainly used for plastic, hard rubber, nylon, electrical insulating materials, determination ofsoftening point temperature of high strength composite material, laminated thermosettingmaterial and non-metal materials heat distortion temperature and VEKA's long fiber reinforced.The operation is convenient, accurate control, is a test instrument for high intelligence, widely used in universities, scientific research units and products quality supervision and inspectionunit.

The machine with Windows 98, Windows2000 or WindowsXP Chinese operation interface,temperature and deformation of real-time rendering, real-time monitoring of test temperaturecurve, print test reports, achieve historical disk, click on the mouse strain and temperature curveat any point, the amount of deformation and temperature interface will automatically display thevalue. Selection of high precision displacement sensor for measuring the deformation.

The thermal deformation and softening point temperature measuring instrument VEKA executive standard:

Comply with GB/T 1633-2000, GB/T 8802,

GB/T 1634-2004, ISO 2507, ISO 75, ISO 306,

ASTMD 1525, ASTMD 648 standard requirements.

The thermal deformation and softening point temperature measuring instrument of VEKAtechnical parameters:

1): room temperature to 300 DEG C temperature range

2) the maximum temperature error: + 0.5 C

3) the heating rate: 50 DEG /h and 120 DEG C /h

4) the temperature measurement points: 1

5) test frame number: 6

6) deformation measuring range: 0 ~ 10mm

7) the maximum deformation error: + 0.005mm

8) sample supporting span: 64mm (flat preferred), 100mm (side)

9) has an upper limit temperature protection function;

10) adopts the control method of distributed control system of SCM and PC machine;

12) with a sample rack automatic lifting system;

13) use of media: methyl silicone oil or transformer oil;

14) cooling: more than 150 DEG C natural cooling, the temperature of 150 DEG C water coolingor natural cooling.

13) size: 920X400X1300mm

The thermal deformation and softening point temperature measuring instrument configuration ofVEKA:

1) a host

2) sample frame six

3) thermal deformation pressure head six

4) VEKA needle press six

5) the high precision displacement sensor six

6) brand desktop computer a