反复进样次数:无限制
进样针清洗方式:内外清洗
位置控制精度:± 0。6 mm
定量环体积:1 – 10000 µL
最小进样体积:1ul
最大进样数:108个2 ml样品瓶
Integrity自动进样器技术参数
进样概念:压力辅助样品Aspiration(PASA),使用~7 PSI样品顶空压力,避免样品管线中产生的气泡。未密封的孔或瓶没有PASA下可以使用。
进样体积:1 – 10000 µL;进样体积依赖于安装的样品环
进样性能监控(IPM):在样品流路中的压力传感器产生压力-时间曲线用于诊断
- 0-9999 mbar 绝对压力读出
- 采样频率: 10ms
对OEM: 可用其他的采样频率,zei多30,000 个数据点
针孔精度:±6 mm
针清洗:自由编程体积和速度,2个溶剂用于内壁,2个用于外壁。
注意:选项为可扩展内部及外部清洗,带2个额外的溶剂
进样针体积:25, 50, 100, 250, 1000和2500 µL (用户可换; 螺丝锁定screw lock)
样品容量:
微孔板:2个,根据SBS尺寸标准
96孔和384孔板,浅或深孔(必须安装2个盘)
108个2mL Chromacol色谱进样瓶或88个Sarstedt微内插管瓶(要求进样瓶适配器)
看Integrity plus,如需要更大样品容量
zei大样品瓶或板高度:48mm(包括垫和盖)
混合和稀释:
4种溶剂位置,每个450 µL
标准1个溶剂泵,用于补充(也用于pick-up 进样)
选项:3个额外的溶剂输送泵
注意:溶剂液体经由样品针及混合(asp/disp)动作,或HOMIX动作后,放入样品瓶/孔
阀切换时间:<100毫秒
流路中湿件材料: SS316, PTFE, ETFE, VESPEL®, Glass, PPS
分配件和清洗管路的湿件材料:ETFE, PTFE, PEEK, Kalrez, Glass, PCTFE
安全safety
Safety and EMC compatibility: According to EC-directives. cCSAus (CSA – UL) approved
Installation class:II
Pollution degree:2
Quality:ISO 9001 certified
Missing vial/well plate sensor:Stops run when detecting missing well plate.
User selectable response to missing vial: skip sample or stop run
Illumination LED:Full color LED with on/off control. Color selectable
For OEM: LED control possible through software
Door sensor:Upon opening the front door, sample processing will be stopped and the
tray will be moved to front after completing the current sample run
Electrical供电
Power requirements 100 – 240 Volt AC +/- 10%. 50/60 Hz
Power consumption 450 VA
Environment环境
Sound pressure level LAeq ‹70 dB
Working temperature 10 - 40°C
Storage temperature -25 / + 60°C
Altitude Max 2000 m
Humidity 20 - 80% RH
物理:
Max load on top cover 15 kg
尺寸(宽×深×高)
- Standard INTEGRITY™ (HPLC/UHPLC/Micro):330 mm x 540 mm x 480 mm
- Standard INTEGRITY™ + sample cooling:330 mm x 620 mm x 480 mm
- INTEGRITYPLUS:330 mm x 680 mm x 480 mm
- INTEGRITYPLUS with sample cooling:330 mm x 760 mm x 480 mm
重量:
- Standard INTEGRITY™ (HPLC/UHPLC/Micro):26 kg
- Standard INTEGRITY™ + sample cooling:30 kg
- INTEGRITYPLUS:31 kg
- INTEGRITYPLUS with sample cooling:35 kg
仪器控制
Graphical User Interface SparkLink instrument control software including Integrity driver
PC interface 2x Sub-D connector with RS232 protocol and Spark Multilink connection
Ethernet RJ45 connector
USB
Outputs 5 programmable relay outputs; NO and NC connectable
1 programmable TTL output; programmable as: Inject marker, Auxiliary
or Alarm
Inputs 4 programmable TTL inputs for OEM applications
经销商
经销商 | 电话 | 咨询 |
---|---|---|
上海仪真分析仪器有限公司 | 400-6699-117 转 5068 | 向他咨询 |
色谱自动进样器(多功能)
售后服务
我会维修/培训/做方法
如果您是一名工程师或者专业维修科学 仪器的服务商,都可参与登记,我们的平台 会为您的服务精确的定位并展示。