9000TCA适用于总烃和总碳分析，采用FID检测器和还原催化炉设计，检测总烃时不经过催化炉，检测总碳则使用催化炉，将CO和CO2转变为甲烷。9000TCA的动态检测范围是0.1ppm至100ppm。
Detector | Flame ionization detector (FID) |
Methanizer | Converts low levels of CO and CO2 to methane |
Range | 0-100 ppm |
MDQ | 0.1 ppm (100 ppb) |
Repeatability | ±1% Full-scale response |
Drift | Zero: < 0.1 ppm over 24 hours. Span: < ±1% over 24 hours, at 10 ppm full-scale. |
Response Time | T90 < 30 sec, Switching < 3 minutes (The Sample Mode switching time is programmable) |
Alarms | Multilevel concentration and fault alarms that result in audible and visual alarms. Alarms may also be mapped to relays to control external equipment. |
Sampling | Internal single or multipoint modules for pre-filtered (1 micron), non-condensing samples, with or without sample pump. |
Calibration | Programmable automatic or manual calibration |
Support Gas | Hydrogen 40 cc/min, Air 200 cc/min. (typical). Hydrocarbon content must be less than 1 ppm. Fuel blend options available, consult Baseline® |
Physical Specifications
Dimensions | 19.00“ (48.3 cm) W x 14.25“ (36.2 cm) D x 5.25“ (13.3 cm) H |
Weight | < 20 lb (9.07 kg) |
Configuration | Bench-top or 19” (48.3 cm) rack-mount, 3U |
Connections | 1/4“ (6.35 mm) tube fitting connectors |
Operating Temperature | 32 to 104°F (0 to 40°C) |
Operating Humidity | 0 - 95% (non-condensing) |
Electrical Specifications
Power | 100–240 V AC, 50/60 Hz, 2 A |
Display | Graphical LCD display, 3.4” x 4.5” (8.64 x 11.43 cm) |
Relay Outputs | 5 programmable form A relays rated to 3A @ 230V AC (optional additional 9 relay output board) |
Analog Outputs | 1 programmable 0-20mA or 4-20mA isolated output (optional additional 3 analog output board) |
Digital Outputs | RS-232, Ethernet |
请扫描二维码查看详细参数
经销商
| 经销商 | 电话 | 咨询 |
|---|---|---|
| 北京普立泰科仪器有限公司 | 400-6699-117 转 8787 | 向他咨询 |
TOC分析仪
售后服务
我会维修/培训/做方法
如果您是一名工程师或者专业维修科学 仪器的服务商，都可参与登记，我们的平台 会为您的服务精确的定位并展示。
