ISO/TR 12389:2009
水泥试验方法.X射线荧光进行化学分析的试验程序报告

Methods of testing cement - Report of a test programme - Chemical analysis by x-ray fluorescence


标准号
ISO/TR 12389:2009
发布
2009年
发布单位
国际标准化组织
当前最新
ISO/TR 12389:2009
 
 
适用范围
This Technical Report describes the results of the inter-laboratory testing of the chemical analysis of cement by x-ray fluorescence. In the first instance, the inter-laboratory testing was carried out in Japan and in Asian countries in accordance with JIS R 5204:2002. A total of 30 laboratories, 16 in Japan and 14 outside Japan, participated in the original testing programme. A further 12 European laboratories participated in tests with the same materials in 2005 in accordance with EN 196-2, a development by CEN/TC 51/WG 15/TG 1 of JIS R 5204. The latest version, developed as ISO 29581-2, is, as of the date of publication of this Technical Report, in the process of being circulated for technical enquiry. The test samples used were Portland cement conforming to CEM I of EN 197-1 and a mixture of Portland cement and blast furnace slag. The mixture corresponded to the composition of Portland blast furnace slag cement, class B, specified in JIS R 5211 and CEM III/A of EN 197-1. Cement reference materials for x-ray fluorescence analysis (No. 601A) are used for the calibration standards, and certified reference materials JCA-CRM-1 and JCA-CRM-2 are used as the validation materials. Constituents analysed include SiO2, Al2O3, Fe2O3, CaO, MgO, SO3, Na2O, K2O, TiO2, P2O5, MnO and SrO. The loss on ignition is also determined. The ISO round robin is a method-performance study conducted under close to optimum conditions with clear calibration and measurement guidelines. This is conducive to producing “best practice” values representative of the ideal situation. However, ISO 29581-2 is intended for use under everyday conditions in laboratories that operate to “good practice”. Annex D sets out the results of some international round robins carried out by a large number of laboratories demonstrating the suitability of ISO 29581-2 as a means for comparing the everyday performance of laboratories.

ISO/TR 12389:2009相似标准


推荐

工信部公布200项行业标准报批 涉及多项分析方法

JC/T    312-2009JC/T    874-2020水泥用硅质原料化学分析方法本标准规定了水泥用硅质原料化学分析方法、X射线荧光分析方法。本标准中分析方法分为基准法和代用法。如果同一成分列了多种测定方法,当有争议时以基准法为准。     本标准适用于水泥用硅质原料及指定采用本标准其他材料。...

熔融制样-X射线荧光光谱法测定镁铝质耐火材料中8种组分

  镁铝质耐火材料广泛应用于钢铁、水泥、玻璃等行业,在检验工作中,多采用GB/T5069—2015进行镁铝质耐火材料化学分析,但该方法耗时相对较长。...

氧化铝陶瓷国家标准

国际标准普遍采用X射线荧光光谱分析,所用标准样品需采用高纯氧化物配制,配制程序复杂,对分析成分较多氧化铝样品则严格按照国际标准化组织(ISO)、JB/T4281-1999标准和ISO5182-1999(E)国际标准规定,经过制样、混样、定值、均匀性实验、正态分布试验、稳定性考证、生产分析使用考核等复杂过程,符合X射线荧光光谱分析标准;均匀性和稳定性好,定值结果准确可靠。...

氧化铝国际标准及国家标准

国际标准普遍采用X射线荧光光谱分析,所用标准样品需采用高纯氧化物配制,配制程序复杂,对分析成分较多氧化铝样品则严格按照国际标准化组织(ISO)、JB/T4281-1999标准和ISO5182-1999(E)国际标准规定,经过制样、混样、定值、均匀性实验、正态分布试验、稳定性考证、生产分析使用考核等复杂过程,符合X射线荧光光谱分析标准;均匀性和稳定性好,定值结果准确可靠。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号