SAE J2599-2003
符合低蒸发排放要求的加油管组件设计原则

Fuel Filler Pipe Assembly Design Practice to Meet Low Evaporative Emission Requirements


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 SAE J2599-2003 前三页,或者稍后再访问。

如果您需要购买此标准的全文,请联系:

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
SAE J2599-2003
发布
2003年
发布单位
美国机动车工程师协会
 
 
适用范围
This SAE Recommended Practice covers design and evaluation of the entire gasoline filler pipe assembly used on cars and light trucks with respect to compliance with CARB (California Air Resources Board) LEV II (meeting or exceeding EPA Tier 2 and EU Stage-5 evaporative emissions requirements). It is limited to an assembly which is joined to the fuel tank using either a hose, Quick Connect Coupling, or a grommet type sealing device. The Design Practice covers the filler cap, filler pipe, filler pipe assembly to tank hose, and filler pipe assembly to tank grommet or spud. It includes recommendations for design of components and assemblies intended to perform successfully in evaporative emission SHED (Sealed Housing for Evaporative Determination) tests, based on best practices known at the time of release.

SAE J2599-2003相似标准


推荐

耐碎石冲击试验台技术条件

仪器特征:1.测试喷枪可自由快速更换符合VDA以及SAE等标准要求2.触摸屏设置,使测试过程更为方便简洁3.平板式测试试样角度可满足45°、54°、90°设置要求,不规则试样采用3D试验箱4.采用连续或间歇运行方式,可在短时间内完成多次测试5.进料速率通过电磁振动进料器进行调节6.大容积储存压缩空气罐使得压力和流速保持恒定,同时可通过喷枪处调节阀控制压力大小.7.配有多重安全保护措施:安全断电装置...

4种高盐废水处理工艺,那种最实用?

反渗透膜处理高盐废水优势简单预处理,占地面积小,可移动性强DTRO系统进水要求,因此只需要简单预处理,无需复杂土建工程,而且DTRO系统模块单元灵活紧凑,因此占地面积小,可移动性强。避免物理堵塞现象DT组件采用开放式流道设计,料液有效流道宽,避免了物理堵塞。...

船舶润滑油检测注意事项

取样时间保持一致,即如果*次取样时间是设备启动1小时后取样,那么以后取样也是设备启动1小时后进行。此外,在取样前一段时间内不要向系统内补新油,若需要补油的话,安排在取样后再补。主机、副机 在冷却器(或过滤器)至发动机之间管路中取样空压机 在曲轴箱油池中点。传动齿轮 在过滤器前油管上。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号