IEC 60603-7-3:2008
电子设备连接器.第7-3部分:频率<100MHz的数据传输用8道非屏蔽和固定式连接器的详细规范

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

2008-07

标准号
IEC 60603-7-3:2008
发布
2008年
发布单位
国际电工委员会
替代标准
IEC 60603-7-3:2010
当前最新
IEC 60603-7-3:2010
 
 
适用范围
This part of IEC 60603 covers 8-way shielded free and fixed connectors and specifies mechanical and environmental requirements and electrical transmission requirements for frequencies up to 100 MHz. These connectors are typically used as category 5 connectors in class D cabling systems specified in ISO/IEC 11801:2002. These connectors are intermateable, interoperable, and backward compatible with other IEC 60603-7 series connectors. While the definition of interoperable is being discussed within the IEC, “interoperable” in this standard means the following: the fixed and the free connector are capable of interconnecting with any IEC 60603-7 series connector, and when it is interconnected, it fully meets all requirements of the lower frequency IEC 60603-7 series standard. NOTE Transmission performance categories: in this IEC standard, the term “category”, when used in reference to transmission performance, refers to those categories defined in ISO/IEC 11801:2002.

IEC 60603-7-3:2008相似标准


推荐


谁引用了IEC 60603-7-3:2008 更多引用

BS EN IEC 60512-27-200:2022 电气和电子设备连接器 测试和测量 IEC 60603-7 系列连接器上高达 2000MHz 的信号完整性测试的附加规范 测试 27a 至 27g BS EN 50599:2014 通用布线系统. 依据EN 50173-4的平衡通信电缆的试验规格. D类应用的屏蔽直接接线和工作区域直软线. 详细规格 DIN EN 60512-26-100:2011 电子设备连接器.试验和测量.第26-100部分:符合IEC 60603-7-测试26a至26g的连接器测量装置,测试和参考安排及测量(IEC 60512-26-100-2008+A1-2011).德文版EN 60512-26-100:2008 + A1:2011 DIN EN 61076-3-115:2011 电子设备用连接器.产品要求.第3-115部分:矩形连接器.工业环境用的与8路屏蔽或无屏蔽连接器一起用的保护性外壳详细规范 DIN EN 61076-3-114:2010 电子设备用连接器.产品要求.第3-114部分:矩形插头座.与IEC 60603-7系列接口结合的、与IEC 61076-3-10614变量相关联的工业环境用8路屏蔽和非屏蔽卡口式连接器保护罩的详细规范(IEC 61076-3-114-2009).德文版本EN 61076-3-114-2009 BS EN 61076-3-114:2009 电子设备用连接器.产品要求.矩形连接器.IEC 60603-7标准系列接口合并工业环境用频率低于600 MHz的8通道屏蔽和非屏蔽连接器防护箱的详细规范.与IEC 61076-3-106标准有关的变体11.卡口连接型 BS EN 60512-26-100:2008+A1:2011 电子设备用连接器.试验和测量.符合IEC 60603-7 标准要求的连接器的测量装置,试验和参考设备和测量方法.试验26a至26g. DIN EN 61076-3-116:2009 电子设备用连接器.产品要求.第3-116部分:矩形连接器,结合IEC 60603-7标准系列接口的工业环境用频率低于600 MHz的8通道屏蔽和非屏蔽连接器的防护箱的详细规范.与IEC 61076-3-106相关的变量13.联锁杆 BS EN 61076-3-116:2008 电子设备用连接器.产品要求.矩形连接器.与IEC 60603-7系列接口结合的工业环境用频率小于600Hz的8道屏蔽和非屏蔽连接器用防护外壳的详细规范.与IEC 61076-3-106相关的13种变量.锁杆 IEC 61076-3-116:2008 电子设备用连接器.产品要求.第3-116部分:矩形连接器.与IEC 60603-7系列接口结合的工业环境用、频率小于600Hz的8道屏蔽和非屏蔽的连接器用防护外壳的详细规范.与IEC 61076-3-106相关的13种变量.锁杆




Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号