能源载体概念,涵盖液体(汽油)或气体(LPG)混合物,涉及燃烧特性(热值MJ/kg)、润滑性能及测试方法(GB/T 380闪点测定)。
| 标准号 & 类别 | 标准名称 | 发布 |
|---|---|---|
| ANSI/ASHRAE Standard 41.13-2023 试验标准 |
Standard Methods for Fuel Higher Heating Value Measurement
标准条件 |
2023-1-1 美国国家标准学会 |
| ASME PTC 34-2017 规范标准 |
Waste Combustors With Energy Recovery
蒸汽发生器 |
2017 美国机械工程师协会 |
| ASTM D5188-14 Test Method |
测定燃料气液比温度的标准试验方法 (基于真空室和活塞的方法) Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels 40;Evacuated Chamber and Piston Based Method41;
真空室 |
2014 美国材料与试验协会 |
| ASTM D5842-14 Practice |
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
采样 |
2014 美国材料与试验协会 |
| ASTM D7111-15a Test Method |
采用感应耦合等离子体发射光谱法 (ICP-AES) 测定中间馏分燃料中微量元素的标准试验方法 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
等离子体 |
2015 美国材料与试验协会 |
| ASTM D7451-16 Test Method |
轻质馏分和中间馏分, 压缩和火花点火燃料水分离特性的标准试验方法 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
|
2016 美国材料与试验协会 |
| ASTM D7901-14b Specification |
Standard Specification for Dimethyl Ether for Fuel Purposes
二甲醚 |
2014 美国材料与试验协会 |
| ASTM D7978-14(2019) 试验方法 |
测定燃料和相关水的活性需氧微生物含量的标准试验方法&x2014;触变凝胶培养法 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
水 |
2019-07-01 美国材料与试验协会 |
| ASTM D8049-17 Test Method |
利用直接成像粒子分析仪测定轻质中间馏出燃料中固体颗粒和水的浓度, 计数和粒度分布的标准试验方法 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
|
2017 美国材料与试验协会 |
| ASTM E2558-13 Test Method |
Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
颗粒物 |
2013 美国材料与试验协会 |
| ASTM E3050-22 规范 |
Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel
|
2022-09-15 美国材料与试验协会 |
| ASTM F2201-10 Specification |
Standard Consumer Safety Specification for Utility Lighters
火焰 |
2010 美国材料与试验协会 |
| ASTM F3363-19 规范 |
Standard Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
|
2019-02-15 美国材料与试验协会 |
| ASTM MNL37-2003 试验/规范 |
Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing
润滑油 |
2003-06 美国材料与试验协会 |
| ASTM RR-D02-1696 2010 |
D7619-通过自动粒子计数器对轻质和中间馏分燃料中的粒子进行分级和计数的测试方法 D7619-Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
颗粒计数器 |
2010 美国材料与试验协会 |
| ASTM STP 1468-2005 指南 |
Elemental Analysis of Fuels and Lubricants: Recent Advances and Future Perspectives
元素分析 润滑剂 |
2005-09-01 美国材料与试验协会 |
| BS 845-2:1987(2011) 试验标准 |
蒸汽、热水和高温传热流体锅炉热性能评估方法 第2部分:综合程序 Methods for Assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids — Part 2 : Comprehensive procedure
热效率 锅炉 |
2011 英国标准学会 |
| BS EN 12697-43:2014 试验标准 |
Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel
沥青混合物 |
2014-06-30 英国标准学会 |
| BS ISO 16861:2015 规范标准 |
Petroleum products. Fuels (class F). Specifications of dimethyl ether (DME)
二甲醚 添加剂 |
2015-05-31 英国标准学会 |
| BS ISO 18215:2015 指南标准 |
Ships and marine technology. Vessel machinery operations in polar waters. Guidelines
柴油发动机 |
2015-04-30 英国标准学会 |
| BS ISO 22702:2018 规范标准 |
Utility lighters. Safety specifications
火焰高度 |
2018-12-31 英国标准学会 |
| BS ISO 5772:2015 规范标准 |
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
软管 软管组件 |
2015-09-30 英国标准学会 |
| DB13/T 2778-2018 试验 |
Test method for thermal performance of civil clean combustion stoves
|
2018-07-16 河北省标准 |
| DIN 86210-3 E:2014-07 规范标准 |
操作材料的补充和海船液体废物的处理 第3部分:加油站的几何形状 Replenishment with operating materials and disposal of fluid waste from seagoing vessels - Part 3: Geometry of bunker stations
|
2014-07 德国标准化学会 |
| DIN 86210-3:2015 规范标准 |
运营材料的补充和海船流体废物的处置 第3部分:加油站的几何形状 Replenishment with operating materials and disposal of fluid waste from seagoing vessels - Part 3: Geometry of bunker stations; Text in German and English
采样 |
2015-06 德国标准化学会 |
| DIN 86210-3:2015-06 规范标准 |
操作材料的补充和海船液体废物的处理 第3部分:加油站的几何形状 Replenishment with operating materials and disposal of fluid waste from seagoing vessels - Part 3: Geometry of bunker stations; Text in German and English
采样 |
2015-06 德国标准化学会 |
| DIN EN 12697-43:2021 试验标准 |
Bituminous mixtures - Test methods - Part 43: Resistance to fuel; German and English version prEN 12697-43:2021
沥青混合物 |
2021-06-01 德国标准化学会 |
| DIN EN 12697-43:2021-06 试验标准 |
用于医疗保健应用中液体和气体的小口径连接器 - 第 2 部分:呼吸应用连接器 (ISO/DIS 80369-2:2021) Small-bore connectors for liquids and gases in healthcare applications - Part 2: Connectors for respiratory applications (ISO/DIS 80369-2:2021); German and English version prEN ISO 80369-2:2021 / Note: Date of issue 2021-05-21
|
2021-06 德国标准化学会 |
| DIN EN 13341 E:2018-11 规范标准 |
用于地上储存家用取暖油、煤油和柴油的静态热塑性储罐 吹塑和旋转成型聚乙烯储罐以及由阴离子聚合聚酰胺制成的旋转成型储罐 6 要求(草案) Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements...
|
2018-11 德国标准化学会 |
| DIN EN ISO 7840 E:2020-04 试验标准 |
Fire Resistant Fuel Hose for Small Ships (Draft)
小型船舶 |
2020-04 德国标准化学会 |
| GB/T 13338-2018 试验/规范 |
Basic rules for the measurement and calculation of thermal equilibrium of fuel-fired furnace in industry
工业炉 热平衡 |
2018-06-07 国家市场监督管理总局 |
| GB/T 20115.1-2021 |
Basic specifications for industrial fuel fired installations—Part 1: General
燃烧 |
2021-10-11 国家市场监督管理总局 |
| GB/T 21736-2008 规范 |
Technical specifications of energy-saving combustion devices for heat treating
热处理设备 能效 |
2008-05-07 国家市场监督管理总局 |
| GB/T 2587-2009 试验 |
General principles for energy balance of equipment using energy
能量 |
2009-04-08 国家市场监督管理总局 |
| GB/T 30163-2023 技术规范 |
Technical Specifications for Energy Saving of High Air Temperature Top-Fired Hot Air Stoves for Blast Furnaces
温度控制 |
2023-11-27 国家市场监督管理总局 |
| GB/T 37650-2019 术语 |
Combustion types—Terms and definitions
氧化剂 |
2019-06-04 国家市场监督管理总局 |
| GB/T 5487-2015 试验方法标准 |
Determination of the gasoline octane number—Test method for research octane number
十六烷值 |
2015-12-31 国家市场监督管理总局 |
| ISO 16861:2015 规范 |
Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME)
二甲醚 |
2015-05-11 国际标准化组织 |
| ISO 22702:2018 规范/规程 |
Utility lighters — Safety specifications
|
2018-12-17 国际标准化组织 |
| ISO/TR 19686-100:2016 指南标准 |
石油产品. 测定同一性质试验方法的等效性. 第100部分: 比较和评估等效性的背景和原则 Petroleum products - Equivalency of test method determining the same property - Part 100: Background and principle of the comparison and the evaluation of equivalency
评估 |
2016-12-00 国际标准化组织 |
| JIS R 0301:1991 试验标准 |
Heat balancing of pottery and refractory firing tunnel kiln
热平衡 |
1991-10-01 日本工业标准调查会 |
| JIS R 0302:1991 试验标准 |
Heat balancing of pottery and refractory firing periodic kiln
热平衡 |
1991-10-01 日本工业标准调查会 |
| PD CEN/TR 17225:2018 指南标准 |
燃料和生物燃料 馏分燃料及其与脂肪酸甲酯(FAME)的混合物的氧化稳定性测定方法评估 Fuels and biofuels - Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME)
氧化稳定性 |
2018-09-01 英国标准学会 |
| PD ISO/TR 21276:2018 术语标准 |
Clean cookstoves and clean cooking solutions. Vocabulary
|
2018-04-24 英国标准学会 |
| SAE AIR5373A-2010 指南标准 |
Fuels in Ground Support Equipment (Other Than Gasoline or Diesel)
发动机 排放 |
2010-08-04 美国机动车工程师协会 |
| SAE AIR5373A-2020 指南标准 |
Fuels in Ground Support Equipment (Other Than Gasoline or Diesel)
发动机 排放 |
2020-09-23 美国机动车工程师协会 |
| SAE ARP5794A-2018 规范标准 |
Centrifugal Aircraft Fuel Pump Requirements, Design and Testing, Aerospace Standard
|
2018-05-16 美国机动车工程师协会 |
| SAE J1297-2017 指南标准 |
Alternative Automotive Fuels
柴油 汽油 |
2017-10-01 美国机动车工程师协会 |
| SAE J1681-2023 规范 |
Gasoline, Alcohol, and Diesel Fuel Surrogates for Materials Testing
液体 添加剂 |
2023-05-01 美国机动车工程师协会 |
| SS-EN 12697-43:2014 试验标准 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
测试试样 |
2014 瑞典标准研究所 |
| SS-EN 16647:2015 规范标准 |
液态燃料火炉 使用酒精基或凝胶状燃料产生火焰的装饰性装置 用于私人住宅 Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households
|
2015-11-06 瑞典标准研究所 |
| SS-ISO 22192:2021 规程标准 |
使用科里奥利质量流量计(MFM)系统加注船用燃料(ISO 22192:2021 等同采用) Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system (ISO 22192:2021, IDT)
|
2021 瑞典标准研究所 |
| SS-ISO 8217:2024 规范标准 |
石油、合成和可再生资源的产品 燃料(类别F) 海上燃料的技术要求(ISO 8217:2024 等同采用) Products from petroleum, synthetic and renewable sources — Fuels (class F) — Specifications of marine fuels (ISO 8217:2024, IDT)
馏分燃料 |
2024 瑞典标准研究所 |
| SY/T 6381-2016 试验 |
Heat determination for heating furnace of petroleum industry
加热炉 |
2016-01-07 行业标准-石油 |
| UL 2039-2016 规范标准 |
UL Standard for Safety Flexible Connector Piping for Fuels (First Edition)
|
2016-05-06 美国保险商实验所 |
| UL 330B-2020 规范标准 |
使用调配设备调配柴油燃料 生物柴油燃料 标称生物柴油浓度高达20%(B20)的柴油/生物柴油混合燃料 煤油 以及燃料油的软管和软管组件的UL安全标准 UL Standard for Safety Hose and Hose Assemblies for Use With Dispensing Devices Dispensing Diesel Fuel Biodiesel Fuel Diesel/Biodiesel Blends With Nominal Biodiesel Concentrations Up To 20 Percent (B20) Kerosene and Fuel Oil
软管组件 |
2020 美国保险商实验所 |
| UL 331A-2020 规范标准 |
对伴有浓度小于等于85%标称乙醇浓缩物(E0-E85)过滤器调查的概述 Outling of investigation for Strainers with nominal elhanol concentrations up to 85 percent(E0-E85)
过滤器 |
2020 美国保险商实验所 |
| UL 331B-2020 规范标准 |
柴油燃料 生物柴油燃料 标称生物柴油浓度高达 20%(B20) 煤油 和燃料油的柴油/生物柴油混合物的 UL 安全过滤器标准 UL Standard for Safety Strainers for Diesel Fuel Biodiesel Fuel Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20) Kerosene and Fuel Oil
过滤器 |
2020 美国保险商实验所 |
| UL 79B-2020 规范标准 |
对柴油燃料 生物柴油燃料 柴油/生物柴油混合伴有浓度小于等于20%标称生物柴油浓缩物(B20) 煤油和燃料油用动力泵调查的概述 Outling of investigation for Power-operated pumps for diesel fuel,biodiesel fuel,diesel/biodiesel blends with nominal biodiesed concentrations up to 20 percent(B20),kerosene, and fuel oil
密封件 泵 |
2020 美国保险商实验所 |
| UL 87B-2020 规范标准 |
柴油燃料 生物柴油燃料 标称浓度达20%(B20)的柴油/生物柴油混合燃料 煤油和燃料油用动力配送装置 Power-operated dispensing devices for diesel fuel, biodiesel fuel, diesel,/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene, and fuel oil
|
2020 美国保险商实验所 |
| UNE-EN 12697-43:2014 试验标准 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
|
2014-10-22 西班牙标准化协会 |
| UNE-EN ISO 10088:2017 规范标准 |
Small craft - Permanently installed fuel systems (ISO 10088:2013)
小型船舶 燃料系统 |
2017-10-25 西班牙标准化协会 |
| VDI 3985-2018 规范标准 |
Principles for the design@ construction@ and acceptance of combined heat and power plants with internal combustion engines
热效率 |
2018-06-01 德国机械工程师协会 |
| VDI 4656-2013 规程标准 |
Design and dimensioning of micro combined heat and power plants
热电联产 |
2013-09 德国机械工程师协会 |
| VDI 4660 Blatt 1-2013 规程标准 |
Conversion factors for specific emissions from energy-conversion systems
|
2013-11 德国机械工程师协会 |
Copyright ©2007-2026 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号
页面更新时间: 2026-01-30 13:26