ZH
RU
ES

astm one cubic meter standard

astm one cubic meter standard, Total:60 items.

In the international standard classification, astm one cubic meter standard involves: Test conditions and procedures in general, Construction materials, Glass, Microbiology, Open systems interconnection (OSI).

AASHTO - American Association of State Highway and Transportation Officials, astm one cubic meter standard

T121-1994 Standard Specification for Mass per Cubic Meter (Cubic Foot)@ Yield@ and Air Content (Gravimetric) of Concrete (Eighteenth Edition; ASTM C138-92)
T121-1997 Standard Method of Test for Mass per Cubic Meter (Cubic Foot)@ Yield@ and Air Content (Gravimetric) of Concrete (Twentieth Edition; ASTM C138-92)
T 121-1997 Standard Method of Test for Mass per Cubic Meter (Cubic Foot)@ Yield@ and Air Content (Gravimetric) of Concrete (HM-22; Part IIA; ASTM Designation: C 138-92)
T106-1994 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50 mm or 2 in. Cube Specimens) (ASTM C109-92)
T106-1996 Standard Specification for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) (Eighteenth Edition; ASTM C109-94a)
T 106M/T 106-2004 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) (ASTM Designation C 109/C 109M-02)
T106-2000 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) (Twentieth Edition; ASTM C109/C109M-98)
T106-1998 Standard Specification for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) (Nineteenth Edition; ASTM C109/C109M-95)
T 192-1993 Standard Method of Test for Fineness of Hydraulic Cement by the 45-Micrometer (No. 325) Sieve (ASTM C430-92)
T121-1986 Standard Method of Test for Weight per Cubic Foot@ Yield@ and Air Content (Gravimetric) of Concrete (ASTM C138-81 E1)
T 106-2002 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) (HM-22; Part IIA; ASTM Designation C 109/C 109M-99)
T 216-2003 Standard Method of Test for One-Dimensional Consolidation Properties of Soils (ASTM Designation D 2435-90)
T216-1994 Standard Method of Test for One-Dimensional Consolidation Properties of Soils (Twentieth Edition; ASTM D2435-90)
T 106M/T 106-2007 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
T 106M/T 106-2009 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
T 106M/T 106-2015 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
T 106M/T 106-2011 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
T 106M/T 106-2018 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
T 106M/T 106-2012 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
T 128-1997 Standard Method of Test for Fineness of Hydraulic Cement by the 150-um (No. 100) and 75-um (No. 200) Sieves (HM-22; Part IIA; ASTM Designation: C 184-94)
T 216-2002 Standard Method of Test for One-Dimensional Consolidation Properties of Soils (HM-22; Part IIB; ASTM Designation D 2435-90)
R 64-2017 Standard Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
R 64-2014 Standard Recommended Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
R 64-2015 Standard Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
TP 83-2010 Standard Method of Test for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar (Revision 1)
T11-1991 Standard Method of Test for Materials Finer Than 75-Micrometer (No. 200) Sieve in Mineral Aggregates by Washing (Eighteenth Edition; ASTM C117-90)
T 11-1997 Standard Method of Test for Materials Finer Than 75-um (No. 200) Sieve in Mineral Aggregates by Washing (HM-22; Part IIA; ASTM Designation C 117-95)

The American Road & Transportation Builders Association, astm one cubic meter standard

AASHTO T 121-1997 Standard Method of Test for Mass per Cubic Meter (Cubic Foot), Yield, and Air Content (Gravimetric) of Concrete HM-22; Part IIA; ASTM Designation: C 138-92 R(2001)
AASHTO T 106-2002 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) HM-22; Part IIA; ASTM Designation C 109/C 109M-99
AASHTO T 128-1997 Standard Method of Test for Fineness of Hydraulic Cement by the 150-um (No. 100) and 75-um (No. 200) Sieves HM-22; Part IIA; ASTM Designation: C 184-94 R(2001)
AASHTO T 106M/T 106-2012 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
AASHTO T 106M/T 106-2013 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
AASHTO T 106M/T 106-2015 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
AASHTO T 106M/T 106-2021 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
AASHTO R 64-2014 Standard Recommended Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
AASHTO R 64-2015 Standard Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
AASHTO TP 83-2010 Standard Method of Test for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar Revision 1

AT-ON, astm one cubic meter standard

ONORM C 2118-1985 Horizontal tanks made of steel; nominal content 1 m3 up to 5 m3; Single and double walled, for above ground storage of liquids

American Society for Testing and Materials (ASTM), astm one cubic meter standard

ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM C109/C109M-02 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C109/C109M-20 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C109/C109M-20a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C1928/C1928M-23 Standard Test Method for Compressive Strength of Alkali Activated Cementitious Material Mortars (Using 2-in. [50 mm] Cube Specimens)
ASTM C1351M-96 Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pa-s and 10⁸ Pa-s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM C1351M-96(2002) Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pa-s and 10⁸ Pa-s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM C1351M-96(2007) Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pa183;s and 10⁸ Pa183;s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM R0063 Concordance of Standard Test Methods and Specifications for Pigments, Dyestuffs and Extenders Between ASTM D01.31 and ISO TC35 (This is not an ASTM standard; available as PDF, only)

British Standards Institution (BSI), astm one cubic meter standard

19/30404044 DC BS EN ISO/ASTM 52921. Additive manufacturing. General principles. Standard practice for part positioning, coordinates and orientation

Professional Standard - Agriculture, astm one cubic meter standard

农业部1435号公告-72-2010 Compilation of National Standards for Veterinary Drugs (Volume 1) Chemical Drugs Compound Maduramicin Ammonium Premix
173兽药质量标准2017年版 Chemical Drugs Volume 1 Veterinary Drug Quality Standard Jiuhua Compound Madumicin Ammonium Premix

API - American Petroleum Institute, astm one cubic meter standard

API MPMS 11.2.2M-1986 Manual of Petroleum Measurement Standards Chapter 11.2.2M-Compressibility Factors for Hydrocarbons: 350–637 Kilograms per Cubic Metre Density (15°C) and –46°C to 60°C Metering Temperature (FIRST EDITION)
API MPMS 11.2.1M-1984 Manual of Petroleum Measurement Standards Chapter 11.2.1M - Compressibility Factors for Hydrocarbons: 638-1074 Kilograms per Cubic Metre Range (Erratum - February 1985)
API MPMS 10.8-1991 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 8 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration (First Edition; ASTM D 4807-88)
API MPMS 11.2-1984 Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M - Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M - Water Calibration of Provers Computer Tape

BELST, astm one cubic meter standard

STB 11.16.08-2011 Fire safety standards systems. Fire alarm systems. Self-contained fire detectors. General technical requirements. Methods of test

American National Standards Institute （ANSI), astm one cubic meter standard

BS EN 14972-15:2021 Fixed firefighting systems. Water mist systems Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems (British Standard)

European Committee for Standardization (CEN), astm one cubic meter standard

EN ISO 17468:2016 Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method

Institute of Electrical and Electronics Engineers (IEEE), astm one cubic meter standard

IEEE Std 1326.2-1993 IEEE Standard for Information Technology. Test Methods for Measuring Conformance to Directory Services. Application Program Interface (API)[language Independent]