ZH
RU
ES

Sector Consolidation and Multisector

Sector Consolidation and Multisector, Total:154 items.

In the international standard classification, Sector Consolidation and Multisector involves: Protection against fire, Elements of buildings, Valves, Ferrous metals, Home textiles. Linen, External structures, Company organization and management, Protection against crime, Products of non-ferrous metals, Lifting equipment, Rubber and plastics products, Medical sciences and health care facilities in general, Construction materials, Fluid storage devices, Iron and steel products, Internal combustion engines, Non-ferrous metals, Pipeline components and pipelines, Shipbuilding and marine structures in general, Pumps, Services, Energy and heat transfer engineering in general, Construction industry, Interior finishing, Electrical wires and cables, Railway rolling stock, Structures of buildings, Glass, Protection against excessive pressure, Materials for aerospace construction, Construction technology, Microbiology, Rubber, Protection of and in buildings, Shop fittings, Refrigerating technology.

Institute of Electrical and Electronics Engineers (IEEE), Sector Consolidation and Multisector

Framework for Integrated Multisector Smart Logistics Framework for Integrated Multisector Smart Logistics

European Committee for Standardization (CEN), Sector Consolidation and Multisector

EN 1634-3:2004 Fire resistance tests for door and shutter assemblies - Part 3: Smoke control doors and shutters
EN 1503-3:2000 Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards (Incorporating corrigendum March 2001)
EN 12516-3:2002 Valves - Shell design strength - Part 3: Experimental method
EN 13241-1:2003 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics (Incorporating corrigendum July 2003; Incorporates Amendment A1: 2011)
EN 1074-4:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
EN 952:1999 Door leaves - General and local flatness - Measurement method
EN 13546:2002 Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods (Incorporates Amendment A1: 2007)
EN ISO 11114-1:1997 Transportable Gas Cylinders - Compatibility of Cylinder and Valve Materials with Gas Contents - Part 1: Metallic Materials Incorporates Corrigendum April 1998; ISO 11114-1:1997
EN 1503-4:2016 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
EN 1092-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories PN designated - Part 3: Copper alloy flanges
EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
EN 1074-6:2004 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
EN 1074-6:2008 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
EN 1074-1:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
EN ISO 4126-3:2020 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
EN 1503-4:2002 Valves - Materials for Bodies, Bonnets and Covers - Part 4: Copper Alloys Specified in European Standards
prEN 10016-2-1992 Non-alloy steel rod for drawing and/or cold rolling; part 2: specific requirements for general purposes rod
prEN 10016-4-1992 Non-alloy steel rod for drawing and/or cold rolling; part 4: specific requirements for rod for special applications
EN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
EN 1074-2:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves

British Standards Institution (BSI), Sector Consolidation and Multisector

BS 5866-3:1991 Blankets suitable for use in the public sector - Specification for synthetic fibre cellular blankets
BS EN 1634-1:2008 Fire resistance and smoke control tests for door, shutter and, openable window assemblies and elements of building hardware - Part 1: Fire resistance tests for doors, shutters and openable windows

EU/EC - European Union/Commission Legislative Documents, Sector Consolidation and Multisector

SM 7- Testing and Certification for Information Technology and Telecommunications (IT & T) - Convergence of the Voluntary and Regulatory Sectors

BE-NBN, Sector Consolidation and Multisector

Standard Association of Australia （SAA）, Sector Consolidation and Multisector

AS 4420.1:2016 Windows, external glazed, timber and composite doors — Methods of test, Part 1: Test sequence, sampling and test methods

SE-SIS, Sector Consolidation and Multisector

SIS SS-ISO 5210/2:1987 Multi-turn valve actuator attachment - Part 2: Flange and coupling performance characteristics

IX-EU/EC, Sector Consolidation and Multisector

COM(2001) 58 FINAL-2001 Proposal for a Council Decision Laying Down the New Guidelines for the Multiannual Programme to Promote International Cooperation in the Energy Sector (1998-2002), SYNERGY, under the Multiannual Framework Programme for Actions in the Energy Sector and Con
1999/21/EC-1998 Council Decision Adopting a Multiannual Framework Programme for Actions in the Energy Sector (1998-2002) and Connected Measures
1999/23/EC-1998 Council Decision Adopting a Multiannual Programme to Promote International Cooperation in the Energy Sector
EU/EC SM 7 Testing and Certification for Information Technology and Telecommunications (IT& T) - Convergence of the Voluntary and Regulatory Sectors

IN-BIS, Sector Consolidation and Multisector

IS 2191 Pt.1-1983
IS 910-1980
IS 13808 Pt.1-1993 Quality management procedures for out-patient department (OPD) and emergency services. Guidelines. Part 1: Up to 30-bedded hospitals
IS 2191 Pt.2-1983
IS 4454 Pt.2-1975

Association Francaise de Normalisation, Sector Consolidation and Multisector

NF E29-316-5*NF EN 1074-5:2001 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves
NF E29-316-4*NF EN 1074-4:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4 : air valves
NF P25-201-1-1:2014 Building works - Installation of industrial, commercial and garage doors and gates - Part 1-1 : Contract bill of technical model clauses
NF P25-201-2:2014 Building works - Installation of industrial, commercial and garage doors and gates - Part 2 : contract bill of special administrative model clauses
NF EN ISO 6383-2:2004 Plastiques - Film et feuille - Détermination de la résistance au déchirement - Partie 2 : méthode Elmendorf
NF P15-202-2:2004 DTU 27.1 - Building works - Private contracts - Covering from blown-out mineral fibres with binder - Part 2 : special clauses.
NF P92-151-20:2013 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: smoke control for hinged and pivoted steel, timber and metal framed gl
NF A50-650-2*NF EN 1715-2:2008 Aluminium and aluminium alloys - Drawing stock - Part 2 : specific requirements for electrical applications
NF A32-060:2001 Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components).
NF P25-201*NF DTU 34.1:2014 Building works - Installation of industrial, commercial and garage doors and gates - Part 1-1 : Contract bill of technical model clauses - Part 1-2 : general criteria for choice of materials - Part 2 : contract bill of special administrative model clauses
NF P72-204-2/A1:2003 DTU 25.42 - Building works - Private contracts - Internal insulation and wall linings using gypsum composite panels - Part 2 : special clauses.
NF P21-203-2/A1:2002 DTU 31.1 - Building works - Private contracts - Timber frameworks and stairs - Part 2 : special clauses.
NF A32-060:2018 Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components)
NF P78-201-2:1993 DTU 39. Building works. Private contracts. Glass mirror and glazing work. Part 2 : special clauses.
NF E29-303-4:2003 Valves - Materials for bodies, bonnets and covers - Part 4 : copper alloys specified in European Standards.
NF E29-417-3:2006 Safety devices for protection against excessive pressure - Part 3 : safety valves and bursting disc safety devices in combination.
NF E29-303-4:2016 Valves - Materials for bodies, bonnets and covers - Part 4 : copper alloys specified in european standards
NF E29-316-3*NF EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3 : check valves.
NF E29-316-2*NF EN 1074-2:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2 : isolating valves
NF P92-150-1:2014 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1 : fire resistance test for door and shutter assemblies and openable windows
NF E29-316-1*NF EN 1074-1:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1 : general requirements
NF V08-013-1/A1*NF EN ISO 6579-1/A1:2020 Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 1 : detection of Salmonella spp. - Amendment 1 Broader range of incubation temperatures, amendment to the status of Annex D, and correcti
NF P92-151-7*NF EN 15269-7:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable windows assemblies, including their elements of building hard-ware - Part 7 : fire resistance for steel sliding doorsets
NF P92-151-2*NF EN 15269-2:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2 : fire resistance of hinged and pivoted steel doorsets
NF P21-204-2:1993 DTU 31-2. Building works. Private contracts. Timberframe houses and buildings construction. Part 2 : special clauses.
NF ISO 7440-1:1993 Véhicules routiers - Essais des équipements d'injection de combustible - Partie 1 : ensembles porte-injecteur et injecteur de calibration.
NF P21-203-2:1993 DTU 31-1. Building works. Private contracts. Timber frameworks and stairs. Part 2 : special clauses.
NF P34-215-2:1993 DTU 40.45 - Building works - Private contracts. Roof covering made of copper sheet and long sheet - Part 2 : special clauses.
NF EN 15446:2008 Émissions fugitives et diffuses concernant les secteurs industriels - Mesurage des émissions fugitives de composés gazeux provenant d'équipements et de canalisations
NF P10-202-2:2008 Building works - Small mansonry unit walls - Partitions and walls - Part 2 : contract bill of special administrative model clauses.
NF F63-306-4*NF EN 50306-4:2003 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4 : multicore and multipair cables standard wall sheathed
NF P75-401-2:2001 DTU45.1 - Building works - Private contracts - Thermal insulation of refrigerating buildings and of regulated temperature premises - Part 2 : special clauses.
NF EN 1092-4:2002 Brides et leurs assemblages - Brides circulaires pour tubes, appareils de robinetterie, raccords et accessoires, désignées PN - Partie 4 : brides en alliages d'aluminium
NF EN 1092-3:2004 Brides et leurs assemblages - Brides circulaires pour tubes, appareils de robinetterie, raccords et accessoires, désignées PN - Partie 3 : brides en alliages de cuivre

Association of German Mechanical Engineers, Sector Consolidation and Multisector

VDI 4475 Blatt 3-2008 Sectoral implementation of source tagging - Application instructions for multimedia and electrical products

ZA-SANS, Sector Consolidation and Multisector

SANS 1651:1996 Glazed aluminium alloy windows and sliding glass doors for external use
SANS 8686-5:2003 Cranes - Design principles for loads and load combinations Part 5: Overhead travelling and portal bridge cranes

Japanese Industrial Standards Committee (JISC), Sector Consolidation and Multisector

JIS A 1522:1996 Windows and doorsets -- Mechanical deformation test of edge rail
JIS B 8833-5:2008 Cranes -- Design principles for loads and load combinations -- Part 5: Overhead travelling and portal bridge cranes

American Society of Mechanical Engineers (ASME), Sector Consolidation and Multisector

ASME B30.2-2011 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)

American National Standards Institute （ANSI), Sector Consolidation and Multisector

ANSI/ASME B30.2-2011 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Sector Consolidation and Multisector

SP-102-1989 Multi-Turn Valve Actuator Attachment Flange and Driving Component Dimensions and Performance Characteristics

Korean Agency for Technology and Standards (KATS), Sector Consolidation and Multisector

KS M ISO 6383-2-2010(2020) Plastics－Film and sheeting－Determination of tear resistance－Part 2：Elmendorf method
KS B ISO 8686-5:2018 Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes

US-CFR-file, Sector Consolidation and Multisector

CFR 29-4231.8-2014 Labor. Part4231:Mergers and transfers between multiemployer plans. Section4231.8:Notice of merger or transfer.
CFR 2-415.14-2014 Grants and agreements. Part415:General program administrative regulations. SubpartC:Intergovernmental review of department of agriculture programs and activities. Section415.14:Simplification, consolidation, or substitution of State plans.
CFR 37-201.3-2013 Patents, trademarks, and copyrights. Part201:General provisions. Section201.3:Fees for registration, recordation, and related services, special services, and services performed by the Licensing Division.
CFR 37-201.3-2014 Patents, trademarks, and copyrights. Part201:General provisions. Section201.3:Fees for registration, recordation, and related services, special services, and services performed by the licensing division.
CFR 43-5.9-2013 Public Lands:Interior. Part5:Commercial filming and similar projects and still photography on certain areas under department jurisdiction. Section5.9:How long will it take to process my request?

Danish Standards Foundation, Sector Consolidation and Multisector

DS 2451-8:2013 Infection control in the health care sector - Part 8: Requirements for laundering and handling of textiles for multiple use
DS/EN 1503-4:2003 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
DS/EN 45503:1999 Attestation Standard for the assessment of contract award procedures of entities operating in the water, energy, transport and telecommunication sectors
DS/EN 1092-3/AC:2007 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
DS/EN 1092-3/AC:2004 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
DS/EN 1092-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sector Consolidation and Multisector

GB/T 16578.2-2009 Plastics.Film and sheeting.Determination of tear resistance.Part 2:Elmendorf method
GB/T 22437.5-2008 Cranes.Design principles for loads and load combinations.Part5: Overhead travelling and portal bridge cranes

International Organization for Standardization (ISO), Sector Consolidation and Multisector

ISO 5210-2:1979 Multi-turn valve actuator attachment; Part 2 : Flange and coupling performance characteristics
ISO 683-15:1992 Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines
ISO 683-15:1976 Heat-treated steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines
ISO 8686-5:1992 Cranes; design principles for loads and load combinations; part 5: overhead travelling and portal bridge cranes
ISO 8686-5:2017 Cranes - Design principles for loads and load combinations - Part 5: Overhead travelling and portal bridge cranes
ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination
ISO/CD 6579-4:2023 Microbiology of the food chain — Horizontal method for the detection, enumeration and serotyping of Salmonella — Part 4: Identification of monophasic Salmonella Typhimurium (1,4,[5],12:i:-) by polymerase chain reaction (PCR)
ISO/CD TS 6579-4 Microbiology of the food chain — Horizontal method for the detection, enumeration and serotyping of Salmonella — Part 4: Identification of monophasic Salmonella Typhimurium (1,4,[5],12:i:-) by polymerase chain reaction (PCR)

NZ-SNZ, Sector Consolidation and Multisector

NZS 4232.2:1988 Performance Criteria for Fire Resisting Closures Part 1: Internal and External Fire Doorsets Part 2: Fire Resisting Glazing Systems (PART 1 IS REVISED - PART 2 IS STILL CURRENT; Includes Amendment 1: 1991)
AS/NZS 60335.2.97:2007 Household and similar electrical appliances - Safety - Part 2.97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (Incorporating Amendment 1: October 2009)

European Committee for Electrotechnical Standardization（CENELEC）, Sector Consolidation and Multisector

EN 60534-3-1:2000 Industrial-Process Control Valves Part 3-1: Dimensions - Face-To-Face Dimensions for Flanged, Two-Way, Globe-Type, Straight Pattern and Centre-To-Face Dimensions for Flanged, Two-Way, Globe-Type, Angle Pattern Control Valves (Incorporating Corrigendum Jul
EN 50306-4:2002 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 4: Multicore and multipair cables standard wall sheathed
EN 50306-4:2020 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 4: Multicore and multipair cables standard wall sheathed

German Institute for Standardization, Sector Consolidation and Multisector

DIN 85003-2:2011 Technical specifications for valves for shipboard use - Part 2: Survey of possible requirements and methods of test
DIN EN 50306-4:2003 Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 4: Multicore and multipair cables standard wall sheathed; German version EN 50306-4:2002
DIN EN 1503-4:2003 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards; German version EN 1503-4:2002
DIN EN 1074-3:2000 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000
DIN 18358:2006 German construction contract procedures - Part C: General technical specifications for building works - Rolling shutters works
DIN 3852-21:2016-09 Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing
DIN EN 1092-3:2022-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German and English version prEN 1092-3:2021 / Note: Date of issue 2022-01-07*Intended as replacement for DIN EN 1092-...
DIN EN 1092-4:2002-08 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002
DIN EN 1092-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 / Note: To be replaced by DIN EN 1092-3 (2022-02).

AT-ON, Sector Consolidation and Multisector

ONORM A 2051-2000 Procurement of works in the water, energy and transport sectors - Notices, tenders and award of contract - Procedural standard
ONORM B 1011 Teil.2-1981 Dimensional co-ordination in building; Modular co-ordination; Planning-rules for openings and built-in units in wall-zones of buildings (doors and Windows)

Group Standards of the People's Republic of China, Sector Consolidation and Multisector

T/CNEA 101.19-2021 PWR pressure boundary components—Material— Part 19:General Requirements of carbon steel and low-alloy steel pipes

CEN - European Committee for Standardization, Sector Consolidation and Multisector

EN 15269-3:2012 Extended application of test results for fire resistance and/or smoke control for door@ shutter and openable window assemblies@ including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timb
EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination

Lithuanian Standards Office , Sector Consolidation and Multisector

LST EN 1503-4-2003 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
LST EN 1092-3-2004 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
LST EN 1092-3-2004/AC-2005 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
LST EN 1092-3-2004/AC-2007 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Sector Consolidation and Multisector

OPINION 95-1997 Cooperation and Harmonization in the Future Activities of the Radiocommunication (ITU-R) and Telecommunication Standardization (ITU-T) Sectors

International Telecommunication Union (ITU), Sector Consolidation and Multisector

ITU-R RUEGO 95 SPANISH-1997
ITU-R VOEU 95 FRENCH-1997
ITU-T RESOLUTION 11 CHINESE-2008 Collaboration with the Postal Operations Council (POC) of the Universal Postal Union (UPU) in the study of services concerning both the postal and the telecommunication sectors

国家市场监督管理总局、中国国家标准化管理委员会, Sector Consolidation and Multisector

GB/T 22437.5-2021 Cranes—Design principles for loads and load combinations—Part 5：Overhead travelling and portal bridge cranes

United States Navy, Sector Consolidation and Multisector

NAVY QPL-22052-27-2005 VALVE, STOP AND STOP CHECK, GLOBE, ANGLE, AND Y PATTERN, CAST OR FORGED CARBON OR ALLOY STEEL, OUTSIDE SCREW AND YOKE (SIZES 2-1/2 INCHES AND LARGER)

KR-KS, Sector Consolidation and Multisector

KS B ISO 8686-5-2018 Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes
KS B ISO 8686-5-2018(2023) Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes

American Society for Testing and Materials (ASTM), Sector Consolidation and Multisector

ASTM A989/A989M-05 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A989/A989M-07 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A989/A989M-11 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A182/A182M-12b Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182/A182M-12a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182/A182M-10 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182/A182M-10a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182/A182M-11 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182/A182M-13 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182/A182M-13a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A182/A182M-14 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

未注明发布机构, Sector Consolidation and Multisector

BS 4504-3.3:1989(1998) Circular flanges for pipes, valves and fittings (PN designated) — Part 3 : Steel, cast iron and copper alloy flanges — Section 3.3 Specification for copper alloy and composite flanges
BS 1560-3.3:1989(2000) Circular flanges for pipes, valves and fittings (Class designated) — Part 3 : Steel, cast iron and copper alloy flanges — Section 3.3 Specification for copper alloy and composite flanges
BS EN 1092-3:2003(2016) Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 3 : Copper alloy flanges

IEC - International Electrotechnical Commission, Sector Consolidation and Multisector

IEC 61162-450:2016 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners – Ethernet interconnection (Edition 1.1; Consolidated Reprint)

CZ-CSN, Sector Consolidation and Multisector

CSN ISO 8686-5:1994 Cranes. Design principles for loads and load combinations. Part 5: Overhead travelling and portal bridge cranes

RU-GOST R, Sector Consolidation and Multisector

GOST R ISO 289-1-2017 Rubbers and rubber compounds. Tests using a shearing-disc viscometer. Part 1. Determination of Mooney viscosity

API - American Petroleum Institute, Sector Consolidation and Multisector

API BULL D2A-1940 VOCATIONAL TRAINING IN OIL AND GAS PRODUCTION PLAN OF COOPERATION BETWEEN AMERICAN PETROLEUM INSTITUTE DIVISION OF PRODUCTION AND STATE TRADE AND INDUSTRIAL TRAINING DEPARTMENTS (FIRST EDITION)

AENOR, Sector Consolidation and Multisector

UNE-EN 1092-3:2004 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges

ES-UNE, Sector Consolidation and Multisector

UNE-EN 1092-3/AC:2004 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges