ZH
RU
ES
Grain size detection
Grain size detection, Total:352 items.
In the international standard classification, Grain size detection involves: Vocabularies, Testing of metals, Ferrous metals, Cutting tools, Sugar. Sugar products. Starch, Particle size analysis. Sieving, Chipless working equipment, Non-ferrous metals, Electric road vehicles, Mechanical testing, Products of the chemical industry, Production of metals, Iron and steel products, Leather technology, Shipbuilding and marine structures in general, Construction materials, Analytical chemistry, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Farming and forestry, Organic chemicals, Coals, Pharmaceutics, Air quality, Products of non-ferrous metals, Miscellaneous domestic and commercial equipment, Ferroalloys, Animal feeding stuffs, Nuclear energy engineering, Physics. Chemistry, Non-destructive testing, Standardization. General rules, Refractories, Powder metallurgy, General methods of tests and analysis for food products, Semiconducting materials, Quality, Fertilizers, Ceramics, Environmental testing, Biology. Botany. Zoology, Paint ingredients, Capacitors, Welding, brazing and soldering, Plastics, Cereals, pulses and derived products, Tobacco, tobacco products and related equipment, Metalliferous minerals, Software development and system documentation, Medical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Continuous handling equipment, Rubber, Electronic display devices, Fluid storage devices, Non-metalliferous minerals.
Professional Standard - Ferrous Metallurgy, Grain size detection
- YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface
- YB/T 5148-1993 Method for determination of average grain size of metals
SAE - SAE International, Grain size detection
HU-MSZT, Grain size detection
Liaoning Provincial Standard of the People's Republic of China, Grain size detection
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Grain size detection
- GB/T 6394-2002 Metal-methids for estimating the average grain size
- GB/T 24177-2009 Standard test methods for characterizing duplex grain sizes
- GB/T 4335-1984 Cold rolled low-carbon steel sheet--Ferrite grain size--Test methods
- GB/T 4335-2013 Determination of ferrite grain size for cold rolled low carbon steel sheets
- GB/T 14999.7-2010 Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
- GB/T 36165-2018 Determination of average grain size of metal.Electron backscatter diffraction (EBSD)method
- GB/T 4197-1984 Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys
- GB/T 6406-2016 Superabrasive.Checking the grain size
- GB/T 13247-1991 Ferroalloys-Sampling and testing methods for determination of grain Size
- GB/T 31351-2014 Nondestructive test method for micropipe density of polished monocrystalline silicon carbide wafers
- GB/T 6288-1986 Determination of particle size for granular molecular sieve
- GB 6288-1986 Determiantion of particle size for granular molecular sieve
- GB/T 2481.1-1998 Bonded abrasives--Determination and designation of grain size distribution--Part 1: Macrogrits F4 to F220
- GB/T 13732-2009 General rules for sampling inspection of bulk materials with uniform size
- GB/T 13732-1992 Genral rules for sampling inspection of bulk materials with uniform size
- GB/T 10515-1989 The determination of particle size for nitrophosphate
- GB/T 26066-2010 Practice for shallow etch pit detection on silicon
- GB/T 10515-2012 Determination of particle size for nitrophosphate
- GB/T 31313-2014 Fluorspar.Determination of particle size distribution by sieving
- GB/T 24891-2010 Determination of particle size for compound fertilizers
- GB/T 9258.2-2000 Coated abrasives-Grain size analysis-Part 2: Determination of grain size distribution of macrogrits P12 to P220
- GB/T 9258.2-2008 Coated abrasives.Grain size analysis.Part 2:Determination of grain size distribution of macrogrits P12 to P220
Japanese Industrial Standards Committee (JISC), Grain size detection
- JIS G 0551:1977 Methods of austenite grain size test for steel
- JIS G 0552:1977 Methods of ferrite grain size test for steel
- JIS G 0551:1998 Methods of austenite grain size determination for steel
- JIS G 0552:1998 Methods of ferrite grain determination test for steel
- JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts
- JIS R 6011:1991 Testing method for grain size of coated abrasive macrogrits (P12-P220)
- JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
- JIS B 4130:1982 Grain sizes of diamond or cubic boron nitride
- JIS H 0501:1986 Methods for estimating average grain size of wrought copper and copper alloys
- JIS H 7805:2005 Method for crystallite size determination in metal catalysts by X-ray diffractometry
- JIS B 4130:1998 Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride
- JIS H 7151:1991 Method of determining the crystallization temperatures of amorphous metals
- JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
- JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
- JIS H 7804:2005 Method for particle size determination in metal catalysts by electron microscope
- JIS G 0551 AMD 1:2022 Steels -- Micrographic determination of the apparent grain size (Amendment 1)
Association Francaise de Normalisation, Grain size detection
- NF E75-231:1993 Abrasive macrograins. Determination of bulk density.
- NF A04-102:2003 Steels - Micrographic determination of the apparent grain size.
- NF A04-102:2013 Steels - Micrographic determination of the apparent grain size
- NF A04-102:1980 Iron and steel. Macrographic determination of the ferritic or austenitic grain size of steels.
- NF ISO 6344-3:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 3 : micrograins P240 à P5000
- NF ISO 8486-2:2007 Abrasifs agglomérés - Détermination et désignation de la distribution granulométrique - Partie 2 : micrograins F230 à F2000
- NF E75-230*NF ISO 8486-1:1996 Bonded abrasives. Determination and designation of grain size distribution. Part 1 : macrogrits F4 to F220.
- NF B40-309:1986 Refractories - Determination of the density,the open porosity and the total porosity of materials in grain form
- NF A04-503:1988 Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys.
- NF A04-505:1988 Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel alloys.
- NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
- NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
- FD CEN/TR 17856:2022 Mesures des propriétés de vernis d'aciers électriques à grains non orientés
- NF ISO 6106:2013 Produits abrasifs - Vérification de la dimension des grains de superabrasifs
- NF A09-599*NF EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
- NF EN 17289-3:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 3 : méthode par sédimentation
- NF EN 17289-2:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 2 : méthode par calcul
- NF B41-204-1*NF EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1 : Determination of grain size and size distribution
- NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
- NF ISO 4701:1986 Minerais de fer - Détermination de la granulométrie par tamisage.
- NF A36-620-4/A1:2002 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.
- NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
- NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
- NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
- NF EN 17289-1:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 1 : informations générales et choix des méthodes d'essai
- FD E01-007:2021 Check of particle cleanliness - Principles and good practices
- NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
- NF ISO 9136-2:1999 Grains abrasifs - Détermination de la masse volumique apparente - Partie 2 : micrograins
- NF E75-351*NF ISO 6106:2013 Abrasive products - Checking the grain size of superabrasives
- NF X31-554:2014 Soil quality - Determination of particle density
- NF V37-030*NF ISO 12194:1996 Leaf tobacco. Determination of strip particle size.
- NF ISO 12194:1996 Tabac en feuilles - Détermination de la taille des particules de strips
- NF E75-100-3:2013 Coated abrasives - Grain size analysis - Part 3: determination of grain size distribution of microgrits P240 to P2500
RO-ASRO, Grain size detection
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Grain size detection
- GB/T 6394-2017 Determination of estimating the average grain size of metal
- GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
- GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
- GB/T 30537-2014 Superconductivity―Measurements for bulk high temperature superconductors―Trapped flux density of large grain oxide superconductors
Standard Association of Australia （SAA）, Grain size detection
- AS 1733:1976 Methods for the determination of grain size in metals
- AS 4514:2006 Abrasive products - Checking the grit size of superabrasives
Taiwan Provincial Standard of the People's Republic of China, Grain size detection
International Federation of Trucks and Engines, Grain size detection
International Organization for Standardization (ISO), Grain size detection
- ISO/CD 643 Steels — Micrographic determination of the apparent grain size
- ISO 2624:1990 Copper and copper alloys; estimation of average grain size
- ISO 2624:1973 Copper and copper alloys — Estimation of average grain size
- ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
- ISO 13319:2000 Determination of particle size distributions - Electrical sensing zone method
- ISO/TS 23151:2021 Nanotechnologies — Particle size distribution for cellulose nanocrystals
- ISO 3059:2012 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
- ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
- ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
- ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
- ISO/CD TS 6818 Traditional Chinese medicine — Test method for moxa floss quality — concentration of waste particles
- ISO 8486:1986 Bonded abrasives; Grain size analysis; Designation and determination of grain size distribution of macrogrits F4 to F220
- ISO 643:1983 Steels; Micrographic determination of the ferritic or austenitic grain size
- ISO 6344-3:2013 Coated abrasives.Grain size analysis.Part 3: Determination of grain size distribution of microgrits P240 to P2500
American Society for Testing and Materials (ASTM), Grain size detection
- ASTM E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
- ASTM E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E1181-02(2008)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM A986/A986M-01(2011) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
- ASTM A986/A986M-01 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
- ASTM A986/A986M-98 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
- ASTM A986/A986M-01(2021) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
- ASTM A986/A986M-01(2016) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
- ASTM E2627-10 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
- ASTM E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
Group Standards of the People's Republic of China, Grain size detection
- T/CSAE 58-2017 Test method for average grain size of non-quenched and tempered steel and its products
- T/CFA 0106024-2021 Determination of the average grain size of cast aluminium silicon alloys
- T/SXJP 018-2023 Fine-grain high-strength hot-rolled ribbed steel bars
- T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
- T/SZBSIA 005-2022 LED Die bonder test
- T/SAS 0004-2018 Bismuth germinate scintillation crystals for space particle dectection
- T/IAWBS 010-2019 Detection method for measuring the surface Detection method for measuring the surface quality and micropipe densityof polished monocrystalline silicon carbide wafers-Laser Scattering Method
- T/IAWBS 008-2019 Experimental method for residual stress in SiC wafers
- T/ZSA 38-2020 Experimental method for residual stress in SiC wafers
- T/SZBSIA 007-2022 Semiconductor die bonder test specification
- T/SCBDIF 002-2023 LCD panel manufacturing process defect detection method
- T/CASAS 013-2021 Measuring method for testing the density of dislocation in SiC crystal Combined KOH etching and image recognition methods
- T/CSTM 00799-2023 Determination of grain size in steel—High temperature laser scanning confocal microscope method
- T/SBX 028-2019 TFT mixed liquid crystal density test method
Professional Standard - Machinery, Grain size detection
- JB/T 9395.5-1999 Measuring method for scatter graininess of optical crystal
- JB/T 9495.5-1999 Measuring method for scatter graininess of optical crystal
- JB/T 20156-2013 Particle counter
- JB/T 7946.4-1999 Metallograph of cast aluminium alloys.Cast aluminium-copper alloys－Grain size
- JB/T 7946.4-2017 Metallography of cast aluminum alloys - Part 4: Grain size of cast aluminum-copper alloys
- JB/T 3168.2-1999 Alloy powder for welding.Determination of hardness and partcle size
- JB/T 9014.3-1999 Continuous handling equipment.Loose bulk material.Determination of composition of size and pellet
British Standards Institution (BSI), Grain size detection
- BS EN ISO 643:2012 Steels. Micrographic determination of the apparent grain size
- BS PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals. Particle size distribution for cellulose nanocrystals
- BS EN ISO 3378:2002 Leather. Physical and mechanical tests. Determination of resistance to grain cracking and grain crack index
- BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
- BS EN 17289-3:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Sedimentation method
- BS EN 17289-2:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Calculation method
- BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
- BS EN ISO 3059:2012 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
- BS EN 17289-1:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. General information and choice of test methods
- BS ISO 6344-3:2013 Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500
- 17/30363662 DC BS EN ISO 643 Steels. Micrographic determination of the apparent grain size
- BS ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Macrogrits
- BS EN ISO 4499-2:2020 Hardmetals. Metallographic determination of microstructure - Measurement of WC grain size
- BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
- BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
- 19/30380076 DC BS EN 17289-2. Characterization of bulk materials. Determination of a sizeweighted fine fraction and crystalline silica content. Part 2. Calculation method
- 19/30380079 DC BS EN 17289-3. Characterization of bulk materials. Determination of a sizeweighted fine fraction and crystalline silica content. Part 3. Sedimentation method
- BS EN 10222-4:2017 Steel forgings for pressure purposes. Weldable fine grain steels with high proof strength
- BS EN 10222-4:1999 Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
- BS EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes. Weldable fine grain steels with high proof strength
- BS ISO 6344-3:2021 Coated abrasives. Determination and designation of grain size distribution - Microgrit sizes P240 to P5000
- BS ISO 6344-2:2021 Coated abrasives. Determination and designation of grain size distribution - Macrogrit sizes P12 to P220
- BS EN ISO 4499-2:2010 Hardmetals. Metallographic determination of microstructure. Measurement of WC grain size
- BS ISO 6106:2013 Abrasive products. Checking the grain size of superabrasives
- BS ISO 6344-2:1998 Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220
Korean Agency for Technology and Standards (KATS), Grain size detection
RU-GOST R, Grain size detection
- GOST R ISO 643-2011 Steels. Micrographic determination of the apparent grain size
- GOST R ISO 643-2015 Steels. Micrographic determination of the apparent grain size
- GOST R 53205-2008 Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements
- GOST 5636-1982 Steel and alloys. Methods of detection and determination of grain size
- GOST 12536-2014 Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
- GOST 21073.0-1975 Non-ferrous metals. Determination of grain size. General requirements
- GOST 21073.2-1975 Non-ferrous metals. Determination of grain size bu grain calculation method
- GOST 27560-1987 Flour and bran. Method for determination of particle size
- GOST 30240.5-1995 Barite concentrate. Method for determination of density
- GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
- GOST 19724-1974 Fluorite. Method of grain-size analysis
- GOST 30423-1996 Cigarettes. Determination of loss of tobacco from the ends
Professional Standard - Commodity Inspection, Grain size detection
- SN/T 0480.1-1995 Method of analysis baryte for export.Determination of size
- SN/T 0736.3-1997 Method of inspection for import and export fertilizers.Determination of granule size
- SN/T 0803.3-1999 Oil bearing materials for import and export.Method for the inspection of kernel measure
- SN/T 0736.3-2011 Test method of import and export fertilizers.Part 3:Determination of granule size
- SN/T 0800.15-1999 Cereals and feedstuffs for import and export.Method for the inspection of kernel measure
Professional Standard - Non-ferrous Metal, Grain size detection
- YS/T 347-2004 Copper and copper alloys-Estimation of average grain size
- YS/T 347-1994 Method for determination of average grain size of copper and copper alloys
- YS/T 587.12-2006 Calcined coke for prebaked blocks. Testing methods. Part 12: Determination of particle size distribution
工业和信息化部, Grain size detection
- YS/T 347-2020 Method for determination of average grain size of copper and copper alloys
Military Standard of the People's Republic of China-General Armament Department, Grain size detection
- GJB 9890.2-2020 Detection and evaluation of structure of GH4169 alloy for aviation use Part 2: Grain size evaluation method
Professional Standard - Agriculture, Grain size detection
- 218药典 三部-2020 Physical examination method 0982 Particle size and particle size distribution method
- 124药典 四部-2020 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
- 143药典 四部-2015 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
- 199药典 三部-2015 Physical inspection method 0982 General rules for particle size and particle size distribution determination method 47
- 845兽药典 一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0982 Particle Size and Particle Size Distribution Determination Method
- NY/T 1121.23-2010 Soil testing.Part 23:Method for determination of soil particle density
- 811兽药典 二部-2015 Appendix Contents 0900 Characteristic Inspection Method 0941 Particle Size Measurement Method
- 2354药典 二部-2010 APPENDIX IX E DETERMINATION OF PARTICLE SIZE AND PARTICLE SIZE DISTRIBUTION
- GB 10515-1989 Nitrophosphate particle size determination
- 1805药典 一部-2010 Appendix XI B Particle Size Measurement
- 172药典 三部-2010 Appendix V VG Particle Size Determination
European Committee for Standardization (CEN), Grain size detection
BE-NBN, Grain size detection
BR-ABNT, Grain size detection
Professional Standard - Aviation, Grain size detection
- HB 20057-2011 Test methods for estimating grain size of superalloy investment castings
Professional Standard-Ships, Grain size detection
- CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid
National Metrological Verification Regulations of the People's Republic of China, Grain size detection
- JJG(机械) 5-1990 Verification Regulations for Particle Size Composition Determination Device
- JJG 902-1995 Verification Regulation of Patical Size Meter by Photosedimention
- JJG(机械) 7-1990 Verification rules for single particle compressive strength tester
- JJG(地质) 1019-1990 SKC-2000 Type Light Transmission Particle Size Distribution Tester Verification Regulations
- JJG 1104-2015 Dynamic Light Scattering Particle Size Analyzers
- JJG(电子) 310006-2006 Specification for verification of noise detectors for particle collision of devices
- JJG(电子) 04045-1995 Verification Regulations for JS-7B Transistor Tester
Professional Standard - Building Materials, Grain size detection
YU-JUS, Grain size detection
- JUS B.B8.105-1984 Testing of mineral filher. The deter,omatopm of grain sin distribution
- JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
- JUS C.A5.062-1989 Metals tests. Determination of resistance to intergranular conosion by Monypenny Strauss test
- JUS H.M8.114-1982 Testing of accessory materials for rubber industr/. Determination of pour density of pelleted carbon black
- JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
- JUS U.B1.018-1980 Testing ofsoils. Determination ofparticle si?e distribution
- JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)
GM Holden Ltd, Grain size detection
Inner Mongolia Provincial Standard of the People's Republic of China, Grain size detection
- DB15/T 2322-2021 Test and evaluation procedure for kernel hardness of naked oats
IN-BIS, Grain size detection
PL-PKN, Grain size detection
- PN C87060-03-1987 Fertilizers Determination of physical properties of powder and crystalline fertilizers Determination of size composition
- PN-EN ISO 4499-2-2021-02 E Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size (ISO 4499-2:2020)
- PN-EN 17289-2-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 2: Calculation method
- PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
- PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)
- PN C87007-16-1993 Calcium fertilizes Determination of grainsize
Indonesia Standards, Grain size detection
German Institute for Standardization, Grain size detection
- DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
- DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
- DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
- DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
- DIN EN 17289-2:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method; German version EN 17289-2:2020
- DIN EN 17289-3:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German version EN 17289-3:2020
- DIN 53206-1:1972 Testing of pigments; particle size analysis, basic terms
- DIN ISO 6106:2015-11 Abrasive products - Checking the grain size of superabrasives (ISO 6106:2013)
- DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
- DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
- DIN 50601:1985 Metallographic examination; determination of the ferritic or austenitic grain size of steel and ferrous materials
- DIN EN 451-2:1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994
- DIN EN ISO 643:2017 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017
- DIN EN 17289-1:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods; German version EN 17289-1:2020
- DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
- DIN EN 17289-3:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German version EN 17289-3:2020
- DIN ISO 6344-3:2017 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 (ISO 6344-3:2013)
Professional Standard - Military and Civilian Products, Grain size detection
- WJ 2276-1995 Verification rules for activated carbon and impregnated carbon particle size analyzer
国家市场监督管理总局、中国国家标准化管理委员会, Grain size detection
- GB/T 13247-2019 Methods for sampling and testing the grain size of ferroalloys products
- GB/T 40944-2021 Determination of feed particle size—Geometric mean diameter method
- GB/T 6288-2021 Determination of particle size for granular molecular sieve
- GB/T 40170-2021 Principle of plasmid extraction and testing
VN-TCVN, Grain size detection
- TCVN 5052-2-2009 Hardmetals.Metallographic determination of microstructure.Part 2: Measurement of WC grain size
- TCVN 4853-1989 Mineral fertilizers.Determination of granularity
- TCVN 6863-2001 Soil quality.Determination of particle density
- TCVN 4838-1989 Sugar.Method of Granulometric structure determination
Defense Logistics Agency, Grain size detection
CZ-CSN, Grain size detection
Danish Standards Foundation, Grain size detection
- DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
- DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
- DS/EN 17289-2:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 2: Calculation method
- DS/EN 10222-4:2021 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
- DS/ISO 1392:1986 Determination of crystallizing point — General method
IT-UNI, Grain size detection
GM North America, Grain size detection
- GM GM9613P-1994 Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication
中国有色金属工业总公司, Grain size detection
- YS/T 27-1992 Methods for measuring and counting particulate contamination on wafer surfaces
ES-UNE, Grain size detection
- UNE-EN 17289-2:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
- UNE-EN 17289-3:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method
- UNE-EN 17289-1:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods
- UNE 43751:1978 ERRATUM GLASS RAW MATERIALS. GRANULOMETRIC TEST
KR-KS, Grain size detection
Professional Standard - Chemical Industry, Grain size detection
- HG/T 2223-1991 Particle Size Determination of Granular Double Superphosphate
- HG 2223-1991 Particle Size Determination of Granular Double Superphosphate
- HG/T 3400-2001 Determination of granule fineness of dyes
Lithuanian Standards Office , Grain size detection
- LST EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
AENOR, Grain size detection
National Metrological Technical Specifications of the People's Republic of China, Grain size detection
PH-BPS, Grain size detection
- PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500
Professional Standard - Electron, Grain size detection
- SJ/T 10557.2-1994 Methods of crystal grain structure measurement for aluminum foil for high voltage electrolytic capacitors
- SJ 20843-2002 Quantitative determination of AB microscopic defect density in gallium arsenide single crystal
Association of German Mechanical Engineers, Grain size detection
Professional Standard - Petrochemical Industry, Grain size detection
- SH/T 0340-1992 Determination of crystallinity of NaY molecular sieve
- SH/T 1491-1992 Determination of crystallization point of high-purity hydrocarbons
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Grain size detection
- PREN 2002-8-1997 Aerospace Series Metallic Materials Test Methods Part 8 - Micrographic Determination of Grain Size (Edition P 2; ASTM E112:1996)
ZA-SANS, Grain size detection
- SANS 3387:2003 Rubber - Determination of crystallization effects by hardness measurements
Hubei Provincial Standard of the People's Republic of China, Grain size detection
- DB42/ 204-2001 Ultrasonic examination for in-service man-made crystal autoclave
Shaanxi Provincial Standard of the People's Republic of China, Grain size detection
- DB61/T 1163-2018 Eddy current inspection rules for in-service artificial crystal kettles
ES-AENOR, Grain size detection
American National Standards Institute （ANSI), Grain size detection
- ANSI/ASTM D6058:2001 Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
Professional Standard - Electricity, Grain size detection
- DL/T 2056-2019 Ion exchange resin and limestone powder particle size detection method laser diffraction method