ZH
RU
ES
Difluoroethylene carbonate
Difluoroethylene carbonate, Total:129 items.
In the international standard classification, Difluoroethylene carbonate involves: Organic chemicals, Inorganic chemicals, Products of the chemical industry, Plastics, Raw materials for rubber and plastics, Food products in general, Rubber and plastics products, Textile fibres, Rubber, Materials and articles in contact with foodstuffs, Kitchen equipment, Environmental protection, Road vehicle systems, Medical equipment, Insulating materials, Water quality, Medical sciences and health care facilities in general.
Professional Standard - Chemical Industry, Difluoroethylene carbonate
- HG/T 4790-2014 Fluoroethylene carbonate
- HG/T 5157~5160-2017 Diethyl carbonate, ethyl methyl carbonate, 1,5-pentanediol and di-tert-butyl dicarbonate for industrial use (2017)
- HG/T 5784~5787-2021 Industrial 3-chlorophthalic anhydride, industrial 4-chlorophthalic anhydride, industrial propylene carbonate and boron trifluoride dimethyl carbonate complex (2021)
- HG/T 5471~5473-2018 Methyl Methacrylate, Butadiene, Styrene Terpolymer (MBS) Resins, Triallyl Isocyanurate and Polyethylene Oxide (2018)
- HG/T 5389~5392-2018 Allyl glycidyl ether for industrial use, sodium formate for industrial use, ethylene carbonate for industrial use and 1,2-propanediol for industrial use (2018)
- HG/T 5869~5871-2021 Green Design Product Evaluation Technical Specifications for Polystyrene Resin, Polybutylene Terephthalate (PBT) Resin and Polyethylene Terephthalate (PET) Resin (2021)
Group Standards of the People's Republic of China, Difluoroethylene carbonate
- T/FSI 039-2019 Ethyl difluoroacetate
- T/SDSCCE 052-2023 The by-product methanol produced from 1,3-cyclohexanedione, ethylene carbonate and ethyl methyl carbonate
- T/DYZL 033-2023 Fluoroethylene carbonate by-product potassium chloride
- T/SZBX 063-2022 Vinylene Carbonate
- T/CIESC 48-2023 2-(Perfluorohexyl) Ethyl Methacrylate、perfluorohexyl ethyl acrylate for industrial use
- T/CPCIF 0092-2021 Initiators for vinyl chloride polymerization—Di (2-ethyl hexyl)peroxide carbonate (EHP)
- T/SHXCL 0013-2022 Lithium bis(fluorosulfonyl)imide/ethyl methyl carbonate solution
- T/GDPIA 51-2022 Anti-squeaking PC/ABS material for automotive interiors
- T/ZZB 2983-2022 Ethyl 3-(N,N-dimethylamino)acrylate
- T/CPCIF 0136-2021 2-Hydroxyethyl methacrylate,Hydroxypropyl methacrylate(mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl methacrylate)& Hydroxypropyl acrylate(mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl acrylate)for industrial use
- T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
- T/FSI 101-2023 Evaluation index system for clean production of perfluoroalkyl ethyl acrylate in fluorine chemical industry
- T/CSRA 21-2022 Plastic composition test Polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), ethylene-vinyl acetate copolymer (EVA), polyethylene terephthalate in plastic products Esters (PET) Qualitative Analysis Method
- T/CAMDI 031-2020 Di-(2-ethylhexyl) terephthalate (DEHT) plasticized polyvinyl chloride(PVC) compounds for infusion and transfusion equipments
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Difluoroethylene carbonate
- GB/T 27801-2011 Vinylene carbonate
- GB/T 20500-2006 Method for the determination of di(2-ethylhexyl)adipate and di-n-octyl adipate in polyvinyl chloride film
- GB/T 28596-2012 Internal carbon coated polyethylene terephthalate(PET)bottle
- GB/T 31403-2015 Plastics.Acrylonitrile-butadiene-styrene/poly (methyl methacrylate) alloy
- GB/T 24797.3-2014 Film for wrapping rubber bales.Part 3:Ethylene-propylene-diene rubber (EPDM) ,acrylonitrilebutadiene rubber (NBR) ,hydrogenated nitrile-butadiene rubber(HNBR) , acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
- GB/T 20499-2006 Method for the determination of di(2-ethylhexyl) adipatemigrating from polyvinyl chloride film in contact with foodstuffs
- GB/T 24417-2009 Determination of diisononyl adipate in PVC wrap films.Gas chromatographic method
工业和信息化部, Difluoroethylene carbonate
GM Daewoo, Difluoroethylene carbonate
GM Europe, Difluoroethylene carbonate
Professional Standard - Light Industry, Difluoroethylene carbonate
GM Global, Difluoroethylene carbonate
- GMW 15582-2013 Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Filled Issue 2; English
GM North America, Difluoroethylene carbonate
Society of Automotive Engineers (SAE), Difluoroethylene carbonate
- SAE AMS3140-1994 COATING, URETHANE, ALIPHATIC ISOCYANATE Polytetrafluoroethylene Filled
- SAE J1685-1995 Classification System for Automotive Acrylonitrile/Butadiene/ Styrene (ABS) and ABS+ Polycarbonate Blends (ABS + PC) Based Plastics, Recommended Practice May 1995
SAE - SAE International, Difluoroethylene carbonate
- SAE AMS3140A-2007 Coating@ Urethane@ Aliphatic Isocyanate Polytetrafluoroethylene Filled
- SAE J1685-2005 Classification System for Automotive Acrylonitrile/Butadiene/Styrene (ABS) and ABS + Polycarbonate Blends (ABS+PC) Based Plastics
国家市场监督管理总局、中国国家标准化管理委员会, Difluoroethylene carbonate
- GB/T 39710-2020 Polycarbonate / acrylonitrile-butadiene-styrene (PC / ABS) material for charging spot housing of electric vehicle
YU-JUS, Difluoroethylene carbonate
- JUS H.B8.730-1982 S-[1, 2-bis(ethoxycarbonyl)-ethyl] 0,0-dimethyl phosphorodithioate (Malathion), technical. Determi- nation ofdiethyl tumarate content
Professional Standard - Textile, Difluoroethylene carbonate
- FZ/T 52034-2014 Polyethylene/polyethylene terephthalate (PE/PET) bicomponent composite staple fiber
- FZ/T 52034-2013 Polyethylene/polyethylene terephthalate (PE/PET) composite staple fiber
- FZ/T 54083-2015 Polyvinyl chloride/polyethylene terephthalate (PVC/PET) coated yarn
- FZ/T 52047-2016 Polyethylene/polyethylene terephthalate (PE/PET) whitening composite staple fiber
- FZ/T 52047-2017 Polyethylene/polyethylene terephthalate (PE/PET) whitening composite staple fiber
International Organization for Standardization (ISO), Difluoroethylene carbonate
- ISO 13636:2012 Plastics - Film and sheeting - Non-oriented poly(ethylene terephthalate) (PET) sheets
- ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
Professional Standard - Agriculture, Difluoroethylene carbonate
- 731兽药典 一部-2015 Text Variety Part Two Fourteen Paintings Propylene Carbonate
- 601兽药典 一部-2015 Text Varieties Part Two Eight-Painted Polyoxyethylene Oleate
- 549兽药典 一部-2015 The second part of the main text variety five-paint ethyl acrylate-methyl methacrylate copolymer aqueous dispersion
(U.S.) Ford Automotive Standards, Difluoroethylene carbonate
- FORD WSS-M4D879-A3-2010 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D682-A7-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WRS-M4D585-C2-2015 POLYCARBONATE/ ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MOLDING COMPOUND, RECYCLED 100% PCR/PIR CONTENT POLYCARBONATE RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D585-C1)
- FORD WSB-M4D682-A3-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D924-B1-2012 POLYCARBONATE/ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MEDIUM IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D585-C1-2013 POLYCARBONATE/ ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D924-B1-2015 POLYCARBONATE/ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MEDIUM IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D585-C1-2017 POLYCARBONATE/ ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D682-A5-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), VERY HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D813-A-2006 POLYCARBONATE + ABS BLEND, (PC+ABS) HIGH IMPACT, PLATING GRADE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D924-A-2010 POLYCARBONATE + ACRYLONITRILE/BUTADIENE/STYRENE BLEND (PC+ABS), HIGH LOW TEMPERATURE IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D924-A-2012 POLYCARBONATE + ACRYLONITRILE/BUTADIENE/STYRENE BLEND (PC+ABS), HIGH LOW TEMPERATURE IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
Professional Standard - Petrochemical Industry, Difluoroethylene carbonate
- SH/T 1628.6-2014 Vinyl acetate for industrial use.Part 6: Determination of hydroquinone
TH-TISI, Difluoroethylene carbonate
- TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)
- TIS 655.2-2011 Plastic utensils for food.part 2: poly (vinyl chloride) polycarbonate polyamide and poly (methyl methacrylate)
Association Francaise de Normalisation, Difluoroethylene carbonate
- NF T52-136:1979 Plastics. Basic materials for polyurethanes. Toluylenediisocyanate. Determination of acidity.
- NF T52-135:1979 Plastics. Primary materials for polyurethanes. Determination of chloride hydrolysable in diisocyanate tolylene.
- NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
German Institute for Standardization, Difluoroethylene carbonate
- DIN 53728-3:1985 Testing of plastics; determination of the viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution
- DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
- DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
American Society for Testing and Materials (ASTM), Difluoroethylene carbonate
- ASTM D2193-97(2001) Standard Test Method for Hydroquinone in Vinyl Acetate
- ASTM D2193-97 Standard Test Method for Hydroquinone in Vinyl Acetate
- ASTM D5991-17 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
Korean Agency for Technology and Standards (KATS), Difluoroethylene carbonate
- KS M ISO 20299-3:2012 Film for wrapping rubber bales-Part 3:Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
British Standards Institution (BSI), Difluoroethylene carbonate
- BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
- BS EN 60684-3-420 to 422:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Polyethylene terephthalate textile sleeving with acrylic based coating - Sheets 420 to 422: Polyethylene terephthalate textile with acrylic-base
- BS 2690-15:1974 Methods of testing water used in industry - Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate
Professional Standard - Medicine, Difluoroethylene carbonate
- YY/T 0926-2014 Quantitative analysis of DEHP in PVC medical devices
- YY/T 0927-2014 Guidance of determination for di(2-ethylhexyl)phthalate (DEHP) released from PVC medical devices
Professional Standard - Commodity Inspection, Difluoroethylene carbonate
- SN/T 2408-2009 Determination of migration of 2-methoxyethylacetate,2-ethoxyethanol,2-ethoxyethyl acetate,bis(2-methoxyethyl)ether,styrene,isophorone and nitrobenzene in toys
European Committee for Standardization (CEN), Difluoroethylene carbonate
- EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
- EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
CEN - European Committee for Standardization, Difluoroethylene carbonate
- EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
Japanese Industrial Standards Committee (JISC), Difluoroethylene carbonate
- JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
Danish Standards Foundation, Difluoroethylene carbonate
- DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
Lithuanian Standards Office , Difluoroethylene carbonate
- LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
AENOR, Difluoroethylene carbonate
- UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination