ZH
RU
ES
Chemistry laboratory temperature and humidity
Chemistry laboratory temperature and humidity, Total:55 items.
In the international standard classification, Chemistry laboratory temperature and humidity involves: Environmental testing, Test conditions and procedures in general, Pulps, Wastes, Construction materials, Protective equipment, Quality, Aircraft and space vehicles in general, Protection of and in buildings, Analytical chemistry, Earthworks. Excavations. Foundation construction. Underground works, Fibre optic communications.
Group Standards of the People's Republic of China, Chemistry laboratory temperature and humidity
- T/QGCML 2029-2023 Laboratory temperature and humidity management specifications
- T/SZUAVIA 009.7-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 7: Temperature variation test
HU-MSZT, Chemistry laboratory temperature and humidity
National Metrological Technical Specifications of the People's Republic of China, Chemistry laboratory temperature and humidity
- JJF(纺织) 104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity
- JJF(纺织)104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Chemistry laboratory temperature and humidity
- GB/T 24327-2009 Pulps.Laboratory wet disintegration.Disintegration of chemical pulps
- GB/T 29600-2012 Technical specification of the temperature & humidity control system for the mobile laboratory
Liaoning Provincial Standard of the People's Republic of China, Chemistry laboratory temperature and humidity
- DB21/T 1985-2012 Technical requirements for temperature and humidity control systems for mobile laboratories
Association Francaise de Normalisation, Chemistry laboratory temperature and humidity
- NF X15-140:2002 Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification
- NF Q50-002-1*NF EN ISO 5263-1:2005 Pulps - Laboratory wet disintegration - Part 1 : disintegration of chemical pulps.
- NF EN ISO 5263-1:2005 Pâtes - Désintégration humide en laboratoire - Partie 1 : désintégration des pâtes chimiques
- NF EN 13040:2007 Amendements organiques et supports de culture - Préparation des échantillons pour les essais physiques et chimiques, détermination de la teneur en matière sèche, du taux d'humidité et de la masse volumique compactée en laboratoire
- NF EN ISO 5263-3:2023 Pâtes - Désintégration humide en laboratoire - Partie 3 : désintégration des pâtes mécaniques à une température supérieure ou égale à 85 oC
- NF P75-207/A1:2006 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 oC/50 % relative humidity).
British Standards Institution (BSI), Chemistry laboratory temperature and humidity
- BS EN ISO 5263-1:2007 Pulps - Laboratory wet disintegration - Disintegration of chemical pulps
- BS EN ISO 5263-1:2004 Pulps - Laboratory wet disintegration - Disintegration of chemical pulps
- BS EN 62005-2:2001 Reliability of fibre optic interconnecting devices and passive optical components - Quantitative assessment of reliability based on accelerated ageing tests - Temperature and humidity, steady state
American Society for Testing and Materials (ASTM), Chemistry laboratory temperature and humidity
- ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM D5744-18 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM D5744-07 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
- ASTM D4016-93 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
- ASTM D4320-93 Standard Test Method for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
- ASTM D4016-14 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer 40;Laboratory Method41;
- ASTM D4320-02 Standard Test Method for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
- ASTM D4320-04 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
Military Standard of the People's Republic of China-General Armament Department, Chemistry laboratory temperature and humidity
- GJB 150.24A-2009 Laboratory environmental test methods for military materiel.Part 24:Temperature-humidity-vibration-altitude test
Japanese Industrial Standards Committee (JISC), Chemistry laboratory temperature and humidity
- JIS P 8220-1:2012 Pulps.Laboratory wet disintegration.Part 1: Disintegration of chemical pulps
- JIS P 8220-2:2012 Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degree C
International Organization for Standardization (ISO), Chemistry laboratory temperature and humidity
- ISO 5263-1:2004 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps
Korean Agency for Technology and Standards (KATS), Chemistry laboratory temperature and humidity
Danish Standards Foundation, Chemistry laboratory temperature and humidity
- DS/EN ISO 5263-1:2005 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps
- DS/EN 13832-3:2006 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
KR-KS, Chemistry laboratory temperature and humidity
- KS M ISO 5263-1-2019 Pulps — Laboratory wet disintegration — Part 1：Disintegration of chemical pulps
Indonesia Standards, Chemistry laboratory temperature and humidity
- SNI ISO 5263-1:2014 Pulps – Laboratory wet disintegration – Part 1 : Disintegration of chemicals pulp
German Institute for Standardization, Chemistry laboratory temperature and humidity
- DIN EN ISO 5263-1:2004 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004); German version EN ISO 5263-1:2004
- DIN EN ISO 5263-1:2004-12 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004); German version EN ISO 5263-1:2004
未注明发布机构, Chemistry laboratory temperature and humidity
Lithuanian Standards Office , Chemistry laboratory temperature and humidity
- LST EN ISO 5263-1:2004 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)
- LST EN 13832-3-2007 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
AENOR, Chemistry laboratory temperature and humidity
- UNE-EN ISO 5263-1:2005 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)
- UNE-EN 13832-3:2007 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
National Association of Corrosion Engineers (NACE), Chemistry laboratory temperature and humidity
- NACE TM0398-1998 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Above 100 Degrees C (212 Degrees F)
- NACE TM0193-2000 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93 Degrees C (200 Degrees F)
European Committee for Standardization (CEN), Chemistry laboratory temperature and humidity
- EN ISO 5263-1:2004 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps
IT-UNI, Chemistry laboratory temperature and humidity
Sichuan Provincial Standard of the People's Republic of China, Chemistry laboratory temperature and humidity
- DB51/T 2156-2016 Guidance for the evaluation and application of measurement uncertainty in chemical analysis laboratories
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Chemistry laboratory temperature and humidity
- ASHRAE OR-10-029-2010 An Experimental Evaluation of HVAC-Grade Carbon-Dioxide Sensors-Part 3: Humidity, Temperature, and Pressure Sensitivity Test Results
Standard Association of Australia （SAA）, Chemistry laboratory temperature and humidity
- AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct