01.040.07 数学、自然科学 (词汇) 标准查询与下载

DB23/T 3412-2023 建设项目环境影响评价技术规范 燃煤发电项目

Technical specifications for environmental impact assessment of construction projects Coal-fired power generation projects

DB4404/T 36-2022 预立医疗照护计划（ACP）沟通指南

本文件规定了预立医疗照护计划（Advance Care Planning,ACP）沟通的基本原则、沟通前评估、沟通内容、沟通环境、人员要求、组织管理、应急措施及记录管理。

Advance Care Planning (ACP) Communication Guide

KS C IEC 60050-101-2022 国际电工词汇 第101部分：数学

International Electrotechnical Vocabulary－Part 101：Mathematics

ASTM E3072-22a 工业生物技术和合成生物学标准术语

1.1 This terminology is a repository for the terms, and their standardized definitions, as relates to the technical standards generated by Committee E62 on Industrial Biotechnology and Synthetic Biology. The meanings and explanations of the technical terms have been written for both the nonexpert and the expert user. 1.2 At a minimum, this terminology is updated annually (at a time corresponding to the publication of the Annual Book of ASTM Standards containing this terminology standard) to include editorially any terms approved in the committee’s technical standards. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Industrial Biotechnology and Synthetic Biology

ASTM E3072-22 工业生物技术标准术语

Standard Terminology for Industrial Biotechnology

ASTM E1705-15(2022) 与生物技术有关的标准术语

1.1 This document is composed of terms, definitions of terms, descriptions of terms, and acronyms used in ASTM documents related to the field of biotechnology. Terms that are adequately defined in a general dictionary are not defined in this terminology standard. 1.2 This standard includes terminology used in biotechnology areas, such as, but not limited to: biological drug products, materials for biotechnology, characterization and identification of biological systems, aseptic sampling, preservation of biological samples, membrane filters, molecular biology, biomass conversion, fuel manufacturing facilities, and fuel analysis. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Biotechnology

ASTM E456-13a(2022) 与质量和统计有关的标准术语

1.1 This standard is the general terminology standard for terms defined in the standards of Committee E11 on Quality and Statistics. 1.2 A term in this standard which lists an attribution to an E11 technical standard indicates that the standard is normative for that term. Any changes in the term definition in the normative standard will be editorially changed in this standard. Any terms added to an E11 standard will be editorially added to this standard with an attribution to that standard. 1.3 Term definitions that are similar to ISO 3534 will be noted in this standard, but ISO 3534 will not be considered normative for any E11 terms. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Quality and Statistics

ASTM E456-13a(2022)e1 与质量和统计相关的标准术语

Standard Terminology Relating to Quality and Statistics

ASTM E1620-97(2022) 与液体颗粒和雾化有关的标准术语

1.1 In a broad sense, this terminology covers terminology associated with liquid particles dispersed in gas. The principal emphasis, however, is on particles produced by the process of atomization. 1.2 All terms, followed by their definitions, are arranged alphabetically. In addition, the terminology contains several tables wherein terms related to specific subjects are segregated and identified. 1.3 Within the broad scope, the following specific categories are included: 1.3.1 Terms pertaining to the structure and condition of individual particles or groups of particles as observed in nature. 1.3.2 Terms pertaining to the structure and condition of individual particles or groups of particles produced by an atomizing device. 1.3.3 Terms pertaining to atomizing devices according to the primary energy source responsible for spray development. (When more than one term is used for the same device or class of devices, the alternative term is followed by the preferred term.) Definitions of the devices may refer to their construction, operating principle, or distinctive spray characteristics. The atomizers, however, are not classified by their respective areas of application or end use. Moreover, the listed terms are generic and do not include brand names, trademarks, or proprietary designations. 1.3.4 Terms pertaining to statistical parameters involving particle measurement, particle size, and size distribution functions. 1.3.5 Terms pertaining to instruments and test procedures utilized in the characterization of liquid particles and sprays. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Liquid Particles and Atomization

BS ISO 20480-3:2021 精细气泡技术 细气泡的使用和测量的一般原则 产生细小气泡的方法

Fine bubble technology. General principles for usage and measurement of fine bubbles. Methods for generating fine bubbles

OENORM EN ISO 80004-1:2021 纳米技术 词汇 第1部分：核心术语和定义（ISO/DIS 80004-1:2021）

Nanotechnologies - Vocabulary - Part 1: Core terms and definitions (ISO/DIS 80004-1:2021)

ONR CEN ISO/TS 80004-6:2021 纳米技术 词汇 第6部分：纳米物体表征（ISO/TS 80004-6:2021）

Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2021)

DB33/T 2367-2021 海洋生态适宜性评价技术指南

Technical Guidelines for Marine Ecological Suitability Assessment

DIN CEN ISO/TS 80004-6:2021 纳米技术. 词汇. 第6部分: 纳米对象表征(ISO/TS 80004-6-2021); 德文版本CEN ISO/TS 80004-6-2021

This Technical Specification specifies terms and definitions relevant to the characterization of nano-objects. This includes terms and definitions for size and shape measurement as well as for chemical analysis.

Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2021); German version CEN ISO/TS 80004-6:2021

prEN ISO 80004-1:2021 纳米技术 词汇 第1部分：核心术语和定义（ISO/DIS 80004-1:2021）

Nanotechnologies - Vocabulary - Part 1: Core terms and definitions (ISO/DIS 80004-1:2021)

ISO 20480-3:2021 细气泡技术.细气泡的使用和测量的一般原则.第3部分：产生细气泡的方法

This document describes methods for generating fine bubbles.

Fine bubble technology - General principles for usage and measurement of fine bubbles - Part 3: Methods for generating fine bubbles

UNI CEN ISO/TS 80004-11:2021 纳米技术 词汇 第11部分：纳米层、纳米涂层、纳米薄膜和相关术语

Nanotechnologies - Vocabulary - Part 11: Nanolayer, nanocoating, nanofilm, and related terms

GSO ISO/TS 80004-12:2021 纳米技术 词汇 第12部分：纳米技术中的量子现象

ISO/TS 80004-12:2016 lists terms and definitions relevant to quantum phenomena in nanotechnologies. All of these terms are important for nanotechnologies, but it is to be noted that many of them are not exclusively relevant to the nanoscale and can also be used to some extent to refer to larger scales. The list of terms presented does not claim to provide exhaustive coverage of the whole spectrum of quantum concepts and phenomena in nanotechnology. It covers important phenomena as acknowledged by many stakeholders from academia, industry, etc. ISO/TS 80004-12:2016 is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

Nanotechnologies — Vocabulary — Part 12: Quantum phenomena in nanotechnology

GSO ISO 20480-1:2021 微细气泡技术 微细气泡使用和测量的一般原则 第1部分：术语

ISO 20480-1:2017 specifies terminology and definitions used in the area of fine bubble technology. Terminology in this document covers general principles, measurements, and individual applications of fine bubble technology.

Fine bubble technology — General principles for usage and measurement of fine bubbles — Part 1: Terminology

GSO ISO/TS 18110:2021 纳米技术 科学、技术和创新指标词汇

ISO/TS 18110:2015 aims to provide the necessary definitions that specify the bounds of key innovation indicators as they relate to nanotechnology, in order to facilitate and unify the global assessment of nanotechnology activities in different areas. The availability of these terms can help the measurement and comparison of various indicators in this field. This Technical Specification does not intend to redefine terms that are already defined in other ISO documents. Furthermore, there is no intention to show how the indicators can be used as an assessment tool.

Nanotechnologies — Vocabularies for science, technology and innovation indicators