01.040.17 计量学和测量、物理现象 (词汇) 标准查询与下载

ASTM E344-19 与温度计和比重计有关的术语

Terminology Relating to Thermometry and Hydrometry

ASTM D6161-19 微滤、超滤、纳滤和反渗透膜工艺用标准术语

1.1 This terminology covers the use of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis for membrane separation processes. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes

DB34/T 3345-2019 马尾松立木材积表

本标准规定了马尾松立木材积的计算模型和材积表。 本标准适用于马尾松立木材积计量。

Masson pine standing timber volume table

DB13/T 2965-2019 餐饮企业诚信计量建设规范

Specifications for the construction of integrity measurement for catering enterprises

DL/T 1894-2018 电力光纤传感器通用规范

General Specifications for Optical Fiber Sensors for Power

ASTM E473-18 与热分析和流变学有关的标准术语

Standard Terminology Relating to Thermal Analysis and Rheology

KS C 1234-1-2018(2023) 智能计量─ 水计量─ 第1部分:一般要求

Smart Metering ─ Water Metering ─ Part 1: General requirements

KS C 1234-1-2018 ——智能计环———首都计量——第1部:普通要求事项

Smart Metering ─ Water Metering ─ Part 1: General requirements

EN IEC 62933-1:2018 电能存储（EES）系统 第1部分：词汇

Electrical Energy Storage (EES) systems - Part 1: Vocabulary

ASTM E344-18 与温度计和比重计有关的术语

Terminology Relating to Thermometry and Hydrometry

IEC 62933-1:2018 电能储存（EES）系统 - 第1部分:词汇

This part of IEC 62933 defines terms applicable to electrical energy storage (EES) systems including terms necessary for the definition of unit parameters@ test methods@ planning@ installation@ safety and environmental issues. This terminology document is applicable to grid-connected systems able to extract electrical energy from an electric power system@ store it internally@ and inject electrical power to an electric power system. The step for charging and discharging an EES system may comprise

Electrical energy storage (EES) systems - Part 1: Vocabulary

ASTM E170-17 关于辐射测量和剂量学的标准术语

This terminology generally covers terms that apply to radiation measurements and dosimetry associated with energy deposition and radiation effects, or damage, in materials caused by interactions by high-energy radiation fields. The common radiation fields considered are X-rays, gamma rays, electrons, alpha particles, neutrons, and mixtures of these fields. This treatment is not intended to be exhaustive but reflects special and common terms used in technology and applications of interest to Committee E10, as for example, in areas of radiation effects on components of nuclear power reactors, radiation hardness testing of electronics, and radiation processing of materials. This terminology uses recommended definitions and concepts of quantities, with units, for radiation measurements as contained in the International Commission on Radiation Units and Measurements (ICRU) Report 85a on “Fundamental Quantities and Units for Ionizing Radiation,” October 2011. Those terms that are defined essentially according to the terminology of ICRU Report 85a will be followed by ICRU in parentheses. It should also be noted that the units for quantities used are the latest adopted according to the International System of Units (SI) which are contained in Appendix X1 as taken from a table in ICRU Report 85a.2 This terminology also uses recommended definitions of two JCGM documents, namely “International vocabulary of metrology” (VIM, 2012, unless indicated otherwise) and “Guide to the expression of uncertainty in measurement” (GUM, 2008). Those terms that are defined essentially according to the terminology of these documents will be followed by either VIM or GUM in parentheses. A term is boldfaced when it is defined in this standard. For some terms, text in italics is used just before the definition to limit its field of application, for example, see activity.

Standard Terminology Relating to Radiation Measurements and Dosimetry

DB42/T 1242-2017 振动监测仪

Vibration Monitor

ASTM E344-16 与温度计和比重计有关的术语

1.1 This terminology is a compilation of definitions of terms used by ASTM Committee E20 on Temperature Measurement. 1.2 Terms with definitions generally applicable to the fields of thermometry and hydrometry are listed in 3.1. 1.3 Terms with definitions applicable only to the indicated standards in which they appear are listed in 3.2. 1.4 Information about the International Temperature Scale of 1990 is given in Appendix X1.

Terminology Relating to Thermometry and Hydrometry

DB11/T 339-2016 工程测量技术规程

Engineering Survey Technical Regulations

ASTM E170-16 辐射测量和剂量相关标准术语

Standard Terminology Relating to Radiation Measurements and Dosimetry

ASTM E473-16 有关热分析和流变学的标准术语

1.1 This terminology is a compilation of definitions of terms used in ASTM documents relating to thermal analysis and rheology. This terminology includes only those terms for which ASTM either has standards or is contemplating some action. It is not intended to be an all-inclusive listing of terms related to thermal analysis and rheology. 1.2 This terminology specifically supports the single-word form for terms using thermo as a prefix, such as thermoanalytical or thermomagnetometry, while recognizing that for some terms a two-word form can be used, such as thermal analysis. This terminology does not support, nor does it recommend, use of the grammatically incorrect, single-word form using thermal as a prefix, such as, thermalanalytical or thermalmagnetometry. 1.3 A definition is a single sentence with additional information included in a Discussion area. It is reviewed every five years.

Standard Terminology Relating to Thermal Analysis and Rheology

DZ/T 0203-2014 航空遥感摄影技术规程

本标准规定了航空遥感摄影的设计、作业前的准备工作、作业飞行、数据处理、DOM制作、质量要求与质量检查以及成果资料整理的技术要求。本标准适用于1∶10 000、1∶50 000比例尺国土资源调查与监测的航空遥感摄影工作,其他比例尺的航空遥感摄影工作可参照执行。

Technical regulation of aerial remote sensing photography

GSO ISO 2041:2013 振动和冲击 术语

This International Standard defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring.

Vibration and shock -- Vocabulary

KS B 0162-2013 表面粗糙度 erminology art 1 urface and its parameters

Surface roughness－Terminology－Part 1：Surface and its parameters