共找到 52 条与 成像技术 (词汇) 相关的标准,共 4 页
本标准规定了照相机、照相器材的产品、零部件名称、技术性能及摄影光学、感光材料等方面的基本术语和定义。 本标准适用于照相机械的标准制定、文件编制、教材撰写、书刊编辑和文献翻译等。
Photographic machinery.Vocabulary
本标准规定了彩色负片冲洗机的术语、技术要求、试验方法和检验规则等。 本标准适用于自动控制的彩色负片冲洗机。 其他负片冲洗机可参照采用。
Color film processor
1.1 This terminology brings together and clarifies the basic terms and definitions used with scientific grade cooled chargecoupled device (CCD) detectors, thus allowing end users and vendors to use common documented terminology when evaluating or discussing these instruments. CCD detectors are sensitive to light in the region from 200 nm to 1100 nm and the terminology outlined in the document is based on the detection technology developed around CCDs for this range of the spectrum. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors
ISO 19262:2015 defines terms used in the area of imaging system capability qualification for archival recording and approval. Only terms related to this area are included. These terms are relevant to the current tasks or are of general interest in imaging system capability qualification for archival recording and approval.
Photography — Archiving Systems — Vocabulary
Optics and photonics. Vocabulary for telescopic systems. Terms for telescopic sights
Photography – Electronic still picture imaging terminology – Part 1: Supplemental vocabulary
Photography. Electronic still picture imaging terminology. Supplemental vocabulary
This document defines terms used in electronic still picture imaging that have not been defined by other ISO/TC 42 standards, Technical Specifications or Technical Reports.
Photography - Electronic still picture imaging terminology - Part 1: Supplemental vocabulary
Scope is not provided for this standard
Microbeam analysis -- Scanning electron microscopy -- Vocabulary
Scope is not provided for this standard
Electronic document management -- Vocabulary -- Part 2: Workflow management
Scope is not provided for this standard
Graphic technology -- Vocabulary -- Part 1: Fundamental terms
Scope is not provided for this standard
Cinematography -- Vocabulary
Scope is not provided for this standard
Graphic technology -- Vocabulary -- Part 3: Printing terms
Scope is not provided for this standard
Microbeam analysis -- Analytical electron microscopy -- Vocabulary
Scope is not provided for this standard
Graphic technology -- Vocabulary -- Part 2: Prepress terms
Scope is not provided for this standard
Graphic technology -- Vocabulary -- Part 4: Postpress terms
This part of ISO 5 establishes terms, symbols, functional notations and a coordinate system to describe geometric and spectral conditions for the measurement of the degree to which a specimen modulates radiant flux for applications in photography, graphic technology, and radiometry. This part of ISO 5 primarily provides a system for describing methods of measuring or specifying the transmission and reflection properties of photographic and graphic arts materials. The geometric and spectral conditions associated with such measurement are specified in ISO 5-2, ISO 5-3 and ISO 5-4.
Photography and graphic technology -- Density measurements -- Part 1: Geometry and functional notation
This International Standard gives terms for and definitions of pre-packaged chemicals used in the processing of silver halide based photographic materials, to permit correct usage. This International Standard does not restrict the manufacturer from adding additional information, but care shall be taken to ensure that this information is not in conflict with the information in this International Standard. Requirements on hazard warnings, name and address of manufacturer or supplier, net content, etc., are not included, as national regulations vary throughout the world. NOTE — In addition to the terms and definitions given in the two official ISO languages (English and French), this International Standard gives the equivalent terms in German, Spanish, Swedish, Italian and Czech. These terms are included at the request of the technical committee ISO/TC 42, and are published under the responsibility of the member body concerned. However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
Photography -- Pre-packaged chemicals for the processing of silver halide based photographic materials -- Vocabulary
This International Standard defines terms used in electronic still picture imaging. Only terms related to electronic still picture imaging are defined. These terms are relevant to current tasks or are of general interest in electronic still picture imaging.
Photography -- Electronic still picture imaging -- Vocabulary
ISO 9211 identifies surface treatments of components and substrates excluding ophthalmic optics (spectacles) by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods whenever necessary, but is not intended to define the process method. This part of ISO 9211 defines terms relevant to optical coatings. These terms are grouped in four classes: basic definitions, definition of coatings by function, definitions of common coating imperfections and other definitions.
Optics and Photonics - Optical Coating – Part1: Definitions
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号