01.040.43 道路车辆工程 (词汇) 标准查询与下载

GSO ISO 26262-1:2013 道路车辆 功能安全 第1部分：词汇

ISO 26262 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production passenger cars with a maximum gross vehicle mass up to 3 500 kg. ISO 26262 does not address unique E/E systems in special purpose vehicles such as vehicles designed for drivers with disabilities. Systems and their components released for production, or systems and their components already under development prior to the publication date of ISO 26262, are exempted from the scope. For further development or alterations based on systems and their components released for production prior to the publication of ISO 26262, only the modifications will be developed in accordance with ISO 26262. ISO 26262 addresses possible hazards caused by malfunctioning behaviour of E/E safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy and similar hazards, unless directly caused by malfunctioning behaviour of E/E safety-related systems. ISO 26262 does not address the nominal performance of E/E systems, even if dedicated functional performance standards exist for these systems (e.g. active and passive safety systems, brake systems, Adaptive Cruise Control). This part of ISO 26262 specifies the terms, definitions and abbreviated terms for application in all parts of ISO 26262.

Road vehicles -- Functional safety -- Part 1: Vocabulary

GSO ISO 8855:2013 道路车辆 车辆动力学和道路承载能力 词汇

This International Standard defines the principal terms used for road vehicle dynamics. The terms apply to passenger cars, buses and commercial vehicles with one or more steered axles, and to multi-unit vehicle combinations.

Road vehicles -- Vehicle dynamics and road-holding ability -- Vocabulary

GSO ISO 6621-1:2013 内燃机 活塞环 第1部分：词汇

This part of ISO 6621 defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings. The terms and definitions in this part of ISO 6621 apply to piston rings for reciprocating internal combustion engines. They may also be used for piston rings of compressors working under analogous conditions. NOTE 1 Further terms and definitions covering measuring principles are given in ISO 6621-2. NOTE 2 In addition to terms given in the three official ISO languages (English, French and Russian), this part of ISO 6621 gives the equivalent terms in the German, Spanish, Portuguese, Italian and Japanese languages. However, only the terms given in the official languages can be considered as ISO terms. These have been included at the request of Technical Committee ISO/TC 22 and are published under the responsibility of the member bodies for Germany (DIN), Spain (AENOR), Portugal (IPQ), Italy (UNI) and Japan (JIS).

Internal combustion engines -- Piston rings -- Part 1: Vocabulary

GSO ISO 6518-1:2013 道路车辆 点火系统 第1部分：词汇

This part of ISO 6518 defines terms related to the ignition systems of spark-ignited internal combustion engines intended for use in road vehicles.

Road vehicles -- Ignition systems -- Part 1: Vocabulary

GSO ISO 26262-2:2013 道路车辆 功能安全 第2部分：功能安全管理

ISO 26262 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production passenger cars with a maximum gross vehicle mass up to 3 500 kg. ISO 26262 does not address unique E/E systems in special purpose vehicles such as vehicles designed for drivers with disabilities. Systems and their components released for production, or systems and their components already under development prior to the publication date of ISO 26262, are exempted from the scope. For further development or alterations based on systems and their components released for production prior to the publication of ISO 26262, only the modifications will be developed in accordance with ISO 26262. ISO 26262 addresses possible hazards caused by malfunctioning behaviour of E/E safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy and similar hazards, unless directly caused by malfunctioning behaviour of E/E safety-related systems. ISO 26262 does not address the nominal performance of E/E systems, even if dedicated functional performance standards exist for these systems (e.g. active and passive safety systems, brake systems, Adaptive Cruise Control). This part of ISO 26262 specifies the terms, definitions and abbreviated terms for application in all parts of ISO 26262.

Road vehicles -- Functional safety -- Part 2: Management of functional safety

GSO ISO 7876-1:2013 燃油喷射设备 词汇 第1部分：燃油喷射泵

This part of ISO 7876 establishes a vocabulary and definitions relating to fuel injection pumps for compression-ignition (diesel) engines. It is intended to achieve a universal vocabulary for fuel injection pumps for use in communication and computer control of service parts. It is complementary to ISO 2710. NOTES 1 When the words "fuel" or "injection" are used in the terms listed, "fuel", or both, may be omitted provided there can be no misunderstanding. 2 A defined term appearing in the definition of another term appears in italic followed by the definition reference number.

Fuel injection equipment -- Vocabulary -- Part 1: Fuel injection pumps

GSO ISO 3833:2013 道路车辆 类型 术语和定义

Abstract Defines terms relating to some types of road vehicles designated according to certain design and technical characteristics. Applies to all vehicles designated for road circulation, except for agricultural tractors which are only incidentally used for the carriage of persons or goods by road. This second edition cancels and replaces the first edition (1976).

Road vehicles -- Types -- Terms and definitions

GSO ISO 7876-2:2013 燃油喷射设备 词汇 第2部分：燃油喷射器

Abstract Specifies terms and definitions in English, French and Russian. Contains the alphabetical indexes in English, French and Russian. Annex A is for information only.

Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors

GSO ISO 7876-3:2013 燃油喷射设备词汇 第3部分：喷射器单元

This part of ISO 7876 establishes a vocabulary and definitions relating to unit injectors for compression-ignition (diesel) engines, and their components. It is complementary to ISO 2710[1]. Definitions in this part of ISO 7876 are unique to unit injectors; other aspects more general to fuel injectors may be found in ISO 7876-2.

Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors

GSO ISO 3536:2013 道路车辆 安全玻璃材料 词汇

This International Standard defines terms relating to safety glazing materials for road vehicles.

Road vehicles -- Safety glazing materials -- Vocabulary

GSO ISO 7237:2013 大篷车 质量和尺寸 词汇

This International Standard provides a vocabulary of masses and dimensions of caravans as defined in ISO 3833. It does not give measurement methods, units used in reporting the results, accuracy required or order of magnitude of the masses and dimensions defined.

Caravans -- Masses and dimensions -- Vocabulary

GSO ISO 7637-1:2013 道路车辆 传导和耦合产生的电气干扰 第1部分：定义和一般考虑因素

defines the basic terms relating to electrical disturbances from conduction and coupling used in its other parts, and gives general information on the whole of ISO 7637 and common to all parts

Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations

GSO ISO 7637-2:2013 道路车辆 传导和耦合产生的电气干扰 第2部分：仅沿供电线路的电气瞬态传导

specifies bench tests for testing the compatibility to conducted electrical transients of equipment installed on passenger cars and light commercial vehicles fitted with a 12 V electrical system or commercial vehicles fitted with a 24 V electrical system

Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only

DB42/T 850-2012 湖北省公路工程复杂桥梁质量鉴定规范

Specifications for Quality Appraisal of Complicated Bridges in Highway Engineering in Hubei Province

DB42/T 851-2012 湖北省公路工程监理规范

Regulations for Supervision of Highway Engineering in Hubei Province

SAE J2506-2012 材料处理器命名和规范

This SAE Standard establishes terminology and the content of commercial literature specifications for self-propelled crawler and wheeled material handlers, pedestal mounted material handlers and their equipment as defined in 3.1. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document. (Material handlers share many design characteristics with hydraulic excavators and log loaders; primarily 360 degree continuous reotation of the upperstructure relative to the undercarriage or mounting. They differ in their operating application. Material handlers are used for the handling of scrap material and normally utilize grapples or magnets. Hydraulic excavators are used for the excavation of earth, gravel and other loose material utilizing a bucket. Log loaders are used for the handling of logs and trees and normally utilize grapplers.) The purpose of this document is to establish a uniform method of providing nomenclature for material handlers.

Material Handler Nomenclature and Specifications

GSO ISO 16232-1:2008 道路车辆 液体回路组件的清洁度 第1部分：术语

This part of ISO 16232 defines the vocabulary used in the characterization and measurement of particulate contamination of parts, components, sub-assemblies and assemblies constituting the fluid circuits of internal combustion engines of road vehicles. This applies to all components that may come into contact with a liquid (e.g. oil, fuel, air conditioning refrigerant, coolant), a solid lubricant or a gas (intake air). Unless otherwise specified, this International Standard deals with particulate cleanliness only. It does not therefore cover appearance defects or contamination by liquid or gas materials. It covers the amount and the nature of residual particulate contaminants resulting from the whole manufacturing processes and from the environment. NOTE This part of ISO 16232 also covers vocabulary that will not be applied in parts 2 to 10 of ISO 16232. This is in order to complement unified usage of wording in the field of cleanliness of road vehicle components.

Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary

GSO ISO 12353-1:2007 道路车辆 交通事故分析 第1部分：术语

This part of ISO 12353 establishes a vocabulary relating to the investigation and analysis of road traffic accidents and to the application of accident data. It also lists other, commonly used terms in the domain NOTE Additional terms and definitions, related to configuration aspects of road vehicle collisions, can be found in ISO 6813.

Road vehicles – Traffic accident analysis – Part 1: Vocabulary

GSO ISO 612:2007 道路车辆 车辆和牵引车尺寸 术语和定义

This international standard defines terms relating to dimensions of motor vehicles and towed vehicles. It does not deal with methods of measurement, the units used in reporting the results or the accuracy required or the order of magnitude of the dimensions defined. NOTE__ Other terms , definitions and symbols are given in the following international standards : ISO3877/1, Tyres, valves and tubes __ List of equivalent terms __ part 1 : Tyres. ISO3877/11, Tyres, valves and tubes __ List of equivalent terms __ part 11 : Tyres valves. ISO3877/111, Tyres, valves and tubes __ List of equivalent terms __ part 111: Tubes. ISO3911, Wheels/rims- Nomenclature , designation, marking, and units of measurement. ISO4131, Road vehicles – Dimensional symbols for passenger cars.1). ISO 4223/1, Definitions of some terms used in the tyre industry – part 1 : Pneumatic tyres.

Road vehicles –Dimensions of motor vehicles & towed vehicles-Terms & Definitions

GSO ISO 611:2006 汽车 自动汽车制动及其支架 词汇

This International Standard defines the principal terms used in relation to the braking and braking equipment of motor vehicles, trailers or combinations of these as defined in ISO 3833. The terms it defines designate either systems or elements involved during the operation of braking, or the values characterizing the whole or a part of the operation.

Road vehicles -- Braking of automotive vehicles and their trailers – Vocabulary.