01.040.49 航空器和航天器技术 (词汇) 标准查询与下载

PN-EN 16603-60-20-2021-01 E 空间工程 星敏感器术语和性能规范

Space engineering -- Star sensor terminology and performance specification

SN EN 16603-60-20-2021 空间工程-星敏感器术语和性能规范

Space engineering - Star sensor terminology and performance specification

DIN 5452-1:2021 航空航天系列. 无人机系统（UAS）. 第1-0部分: 术语和定义; 德文和英文文本

This document specifies terms and definitions in the field of unmanned aircraft systems that are used by private, commercial users and by those under public law as well as manufacturers. In addition to that regulating and supervisory authorities as well as testing institutes are

Aerospace series - Unmanned aircraft systems (UAS) - Part 1: Terms and definitions; Text in German and English

OEVE/OENORM EN 16603-60-20-2020 空间工程-星敏感器术语和性能规范

Space engineering - Star sensor terminology and performance specification

DIN EN 16603-60-20:2020 空间工程. 星传感器术语和性能规范; 英文版 EN 16603-60-20-2020

This standard specifies star tracker performances as part of a space project. The standard covers all aspects of performances, including nomenclature, definitions, and performance metrics for the performance specification of star sensors. The standard focuses on performance speci

Space engineering - Star sensor terminology and performance specification; English version EN 16603-60-20:2020

ASTM F3341/F3341M-20a 无人机系统的标准术语

Standard Terminology for Unmanned Aircraft Systems

ASTM D3878-20b 复合材料标准术语

1.1 These definitions cover generic terms, including terms of commercial importance, that appear in one or more standards on composites containing high-modulus (greater than 20 GPa (3 × 106 psi)) fibers. 1.2 The definitions cover, in most cases, special meanings used in the composites industry. No attempt has been made to include common meanings of the same terms as used outside the composites industry. 1.3 Definitions included have, in general, been approved as standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Composite Materials

T/ZSA 50-2020 低轨卫星物联网系统 体系结构

本文件规定了低轨卫星物联网系统的构成及主要功能，从系统连通、通信和信息几个不同的视角描述了卫星物联网的体系架构。 本文件适用于各应用领域卫星物联网星座系统、运营系统和应用系统的参考设计。

The Architecture of Low-orbit satellite Internet of Things system

ASTM F3377-20 与商业航天有关的标准术语

1.1 This terminology standard is a compilation of definitions of terms used by ASTM Committee F47 on Commercial Spaceflight. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Commercial Spaceflight

ASTM D3878-20a 复合材料标准术语

Standard Terminology for Composite Materials

ASTM D3878-20 复合材料标准术语

Standard Terminology for Composite Materials

T/IOT 0102-2020 卫星物联网系统终端

安装在地面或者设备上，与数据采集装置协同工作，能够接入基于天基卫星通信网络，可进行定位、状态监测、数据自动存储和传输，可采集数据发送到星上数据采集载荷，并接收星上数据采集载荷下发的广播/业务数据。

General Technical Specification for Terminal of Satellite IoT

T/IOT 0103-2020 卫星物联网系统空中接口

本团体标准主要定义了天基卫星物联网空中接口标准，包括终端到卫星，卫星到信关站之间的信令协议。

Standardization of air Interface

T/IOT 0101-2020 卫星物联网体系架构

卫星物联网系统就是通过由部署在地球各处的数据采集终端，将各种类型数据采集传感器收集到的数据（ADS、ADS-B 、ARGOS 、DCS数据）发送到数据采集终端，数据采集终端在完成与卫星系统的同步后，在卫星经过终端覆盖区域上空时，将采集到数据发送到DCS卫星，DCS卫星在经过信关站信关站信关站上空时，将接收到的采集数据发送到信关站信关站信关站，由信关站信关站进行数据分类处理后，通过互联网VPN专用网络传输到地面运营支撑中心，经过大数据分析、数据建模，为航空、海事、林业、地震、水利、气象、海洋、环境监测等行业，提供行业的整体卫星物联网解决方案。 卫星物联网系统是由空间段、地面段和用户段三部分组成。

Satellite IoT Architecture

ASTM F3060-20 飞机标准术语

1.1 This terminology contains a listing of terms, abbreviations, acronyms, and symbols related to aircraft covered by ASTM Committees F37 and F44 airworthiness design standards. It is intended to ensure the consistent use of terminology throughout all ASTM light aircraft standards. 1.2 Units—The definitions of units will be as defined in NIST SP 330 and will not be duplicated in this document. NIST SP 330 is available on the internet. The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 Source References—The listed document(s) was/were the original source for the definition. However, the definition may have been edited for use in this document and the F37 and F44 standards, and may not completely match the original in every respect. 1.4 A definition adapted from a particular standard within the ASTM aircraft collection of standards is not limited to use within only those standards. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Aircraft

ASTM F3341/F3341M-20 无人机系统的标准术语

Standard Terminology for Unmanned Aircraft Systems

ASTM D3878-19a 复合材料标准术语

Standard Terminology for Composite Materials

ASTM E349-06(2019)e1 与空间模拟有关的标准术语

Standard Terminology Relating to Space Simulation

ASTM F3377-19 与商业航天有关的标准术语

Standard Terminology Relating to Commercial Spaceflight

ASTM D3878-19 复合材料标准术语

Standard Terminology for Composite Materials