01.040.79 木材加工(词汇) 标准查询与下载

ASTM D1165-18 商业硬木和软木的标准术语

1.1 Commercial species group names are listed with common tree and botanical names. Commercial names are representative of commercial practice in the United States and Canada. Some foreign species that are used in the United States and Canada are listed in Appendix X1 with their commercial and botanical names. 1.2 The official common names conform to USFS AH 41. In addition to the official common name for a species, the checklist also lists other names by which the species and the lumber produced from it are sometimes designated. Names unique to Canada are shown with an *. 1.3 The designations in parentheses, (North) and (South), a convention used by the American Lumber Standard Committee (ALSC) accredited lumber rules writing agencies listed in NIST PS 20, identify a commercial name applied only when the included species are harvested from Canada as (North) or the United States as (South). 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Nomenclature of Commercial Hardwoods and Softwoods

T/ZZB 0412-2018 竹砧板

本标准规定了竹砧板的术语和定义、基本要求、技术要求、检验方法、检验规则、标识、包装、贮存和运输、质量承诺。 本标准适用于以竹材为主要原材料加工制成的供加工食物、水果等食品用的砧板。

Bamboo cutting board

KS F 1556-2017 木材防腐处理相关的标准术语

Standard terminology related to wood－Preservative treatments for wood

KS F 1555-2017 与木材、木材粘合和胶合板相关的标准术语

Standard terminology related to wood－Wood adhesion and plywood

GSO ISO 8965:2016 伐木业 技术 术语和定义

This International Standard defines terms relating to technological operations in the logging industry. NOTE 1 ISO 6814 gives terms and definitions related to mobile and self-propelled machinery used in forestry. NOTE 2 ISO 24294 gives terms and definitions related to round and sawn timber.

Logging industry -- Technology -- Terms and definitions

GSO ISO 5323:2016 实木镶木地板和原木镶木地板块 词汇

1.1 This International Standard establishes terms and definitions for the purpose of expressing as correctly as possible concepts relating to wood par-quet flooring and to raw parquet blocks. 1.2 The terms and definitions given in this International Standard are not restrictive.

Solid wood parquet and raw parquet blocks -- Vocabulary

GSO ISO 7947:2016 木工机械 二面、三面和四面造型机 术语和验收条件

This International Standard specifies the nomenclature appropriate to each part of the machine and, with reference to ISO/R 230, both geometrical and practical tests for two-, threeand four-side moulding machines, and gives the corresponding permissible deviations which apply to machines for general purpose use and normal accuracy. NOTE — In addition to terms used in two of the three official ISO languages (English and French), this International Standard gives in the annex the equivalent terms in German, Spanish, Italian and Swedish; these have been Included at the request of Technical Committee ISO/TC 39 and are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (IRANOR), Italy (UNI) and Sweden (SIS). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions. This International Standard deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of the components, etc.), nor to its characteristics (speeds, feeds, etc.) which should generally be checked before testing accuracy.

Woodworking machines -- Two-, three- and four-side moulding machines -- Nomenclature and acceptance conditions

KS F 1554-2016 木结构用木钉和紧固件相关的标准术语

Standard terminology related to wood－Nails and fasteners for wood structures

KS F 1553-2016 与原木和锯材相关的标准术语

Standard terminology related to wood-Log and sawn timber

ASTM D6696-16 了解氰化物样品的标准指南

4.1 This guide provides standard terminology for use in identifying and describing the different chemical forms of cyanide. The complex nature of cyanide chemistry, existence of numerous distinct chemical forms as well as the various regulatory distinctions that may be made can lead to confusion in technical discussions on cyanide and in the selection of appropriate methods for its analysis. This guide is intended to provide clarification and a common framework of terms and definitions to facilitate discussions and referencing different cyanide chemical species and groups of cyanide compounds. 4.2 The use of such common terminology is particularly important from an environmental perspective because certain forms of cyanide are considered to be toxic. Therefore, their release into the environment is regulated by federal and state agencies. Thus a general understanding of cyanide chemistry and species definitions is needed for proper wastewater management and testing. 1.1 This guide defines guidance based on a consensus of viewpoints for interpretation of test results to identify various chemical forms of cyanide. It is intended to provide a general understanding of the chemical nature of distinct cyanide species as related to chemical analysis and environmental fate and transport. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Guide for Understanding Cyanide Species

GSO ISO 18775:2015 包层 术语和定义、材料特性和公差的估计

  Scope is not provided for this standard

Veneers -- Terms and definitions, determination of physical characteristics and tolerances

GSO ISO 24294:2015 木材 圆木和锯材 词汇

  Scope is not provided for this standard

Timber -- Round and sawn timber -- Vocabulary

GSO ISO 2300:2015 阔叶树种锯切材 缺点 术语和定义

  Scope is not provided for this standard

Sawn timber of broadleaved species -- Defects -- Terms and definitions

GSO ISO 2074:2015 胶合板 词汇

This international Standard establishes terminology relating specifically to plywood. It includes descriptions for terms that might or might not be defined in other standards relating to wood and other wood-based materials. The descriptions of the terms are intended to provide clarification, and interpretation if necessary, of general terminology and definitions as they relate to the manufacturers or use of plywood.

Plywood -- Vocabulary

GSO ISO 7949:2015 木工设备 带刀片的单板剪 名称和验收条件

This International Standard specifies the nomenclature appropriate to each part of the machine and, with reference to ISO/R 230, both geometrical and practical tests for veneer pack edge shears, and gives the corresponding permissible deviations which apply to machines for general purpose use and normal accuracy. NOTE — In addition to terms used in two of the three official ISO languages (English and French), this International Standard gives in the annex the equivalent terms in German, Spanish, Italian and Swedish; these have been included at the request of Technical Committee ISO/TC 39 and are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (IRANOR), Italy (UNI) and Sweden (SIS). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions. This International Standard deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of the components, etc.), nor to its characteristics (speeds, feeds, etc. ) which should generally be checked before testing accuracy.

Woodworking machines -- Veneer pack edge shears -- Nomenclature and acceptance conditions

GSO ISO 1032:2015 锯切针叶树木材 尺寸 术语和定义

This International Standard establishes a first series of terms and definitions for correct and adequate understanding of the terms relating to squareedged and unedged sawn timber, its geometrical elements and sizes.

Coniferous sawn timber -- Sizes -- Terms and definitions

GSO ISO 1031:2015 锯切针叶木材 缺点 术语和定义

1.1 This International Standard establishes international terms and definitions for defects in coniferous sawn timber, classified in ISO 1029, Coniferous sawn timber — Defects — Classification. 1.2 This International Standard covers all unplaned sawn timber, and sawn timber surfaced to size or planed but without profiling.

Coniferous sawn timber -- Defects -- Terms and definitions

GSO ISO 9086-1:2015 木材 物理和机械试验方法 词汇 第1部分：一般概念和宏观结构

This part of ISO 9086 gives terms and definitions relating to general concepts and wood macrostructure.

Wood -- Methods of physical and mechanical testing -- Vocabulary -- Part 1: General concepts and macrostructure

LY/T 2483-2015 竹炭产品术语

本标准规定了竹炭专用术语及其产品分类。本标准适用于我国竹炭及相关制品行业。

Terminology of bamboo charcoal products

GSO ISO 9451:2014 木工机械单板平面手动压机标签

This International Standard specifies the nomenclature appropriate to the various parts of hand-loading veneering presses for flat surfaces in order to assist manufacturers and users in the identification of these parts. NOTE — In addition to terms used in two of the three official ISO languages (English and French), this International Standard gives the equivalent terms in the German, Spanish and Italian languages; these are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (AENOR) and Italy (UNI). However, only the terms given in the official languages can be considered as ISO terms. This International Standard applies to those machines designated by the number 31.331.1 in ISO 79841).

Woodworking machines -- Hand-loading veneering presses for flat surfaces -- Nomenclature