01.040.79 木材加工(词汇) 标准查询与下载

GSO ISO 9451:2014 木工机械单板平面手动压机标签

This International Standard specifies the nomenclature appropriate to the various parts of hand-loading veneering presses for flat surfaces in order to assist manufacturers and users in the identification of these parts. NOTE — In addition to terms used in two of the three official ISO languages (English and French), this International Standard gives the equivalent terms in the German, Spanish and Italian languages; these are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (AENOR) and Italy (UNI). However, only the terms given in the official languages can be considered as ISO terms. This International Standard applies to those machines designated by the number 31.331.1 in ISO 79841).

Woodworking machines -- Hand-loading veneering presses for flat surfaces -- Nomenclature

KS M ISO 633:2014 软木词汇

Cork－Vocabulary

KS B ISO 7008:2013 木工机械 桌式圆锯机的名称及验收条件

Woodworking machines－Single blade circular saw benches with or without travelling table－Nomenclature and acceptance conditions

KS B ISO 9267:2013 木工机械 带锯刃磨机 术语

Woodworking machines－Bandsaw blade sharpening machines－Nomenclature

KS B ISO 7570:2013 木工机械 表面刨和厚度调整机制 术语和验收条件

Woodworking machines－Surface planing and thicknessing machines－Nomenclature and acceptance conditions

KS B ISO 7571:2013 木工机械 有单面刨光刀架刨的平面刨床 专用术语和验收条件

Woodworking machines－Surface planing machines with cutterblock for one-side dressing－Nomenclature and acceptance conditions

KS B ISO 7948:2013 木工机械 镂铣机 程序切割 专用术语和验收条件

Woodworking machines－Routing machines－Nomenclature and acceptance conditions

KS B ISO 7957:2013 木工机床 径向圆盘锯 专用术语和验收条件

Woodworking machines－Radial circular saws－Nomenclature and acceptance conditions

KS B ISO 7958:2013 木工机械 原木材和厚板纵向切割用单刀行程圆盘锯 专用术语和验收条件

Woodworking machines－Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels－Nomenclature and acceptance conditions

KS B ISO 7569:2013 木工机械 2、3面或4面抛光、雕刻机 术语和验收条件

Woodworking machines-Planing machines for two-, three- or four-side dressing-Nomenclature and acceptance conditions

GSO ISO 7294:2013 木工锯锯齿 轮廓形状 术语和名称

Abstract ISO 7294 is not intended to standardize certain tooth types. Deals with saw blades for hand saws or machine saws. The designation system established in ISO 7294 is not applicable to saw blades with ahrd metal tips. Gives in addition to the terms in English and French the equivalent terms in Italian in an annex.

Saw teeth for woodworking saws -- Profile shape -- Terminology and designation

GSO ISO 7950:2013 木工机械 单链榫眼机 术语和验收条件

This International Standard specifies the nomenclature appropriate to each part of the machine and, with reference to ISO/R 230, the geometrical tests for Single chain mortising machines, and gives the corresponding permissible deviations which apply to machines for general purpose use and normal accuracy. NOTE - In addition to terms used in two of the three official ISO languages (English and French), this International Standard gives in the annex the equivalent terms in German, Spanish, Italian and Swedish; these have been included at the request of ISO Technical Committee TC 39 and are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (IRANOR), Italy (UNI) and Sweden (SIS). However, only the terms and definitions given in the official languages tan be considered as ISO terms and definitions. This International Standard deals only with the verification of accuracy of the machine. lt does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of the components etc.), nor to its characteristics (Speeds, feeds etc.) which should generally be checked before testing accuracy. This International Standard does not impose any practical test. For Single chain mortising machines, practical tests should be exceptions and have to be stated i

Woodworking machines -- Single chain mortising machines -- Nomenclature and acceptance conditions

GSO ISO 9566:2013 木工机械 多轴单端开榫机 术语

This International Standard specifies the nomenclature appropriate to the various parts of single-end tenoning machines with several spindles in order to assist manufacturers and users in the identification of these parts. NOTE - In addition to terms used in two of the three official IS0 languages (English and French), this International Standard gives the equivalent terms in the German, Spanish and Italian languages; these are published under the responsibility of the member bodies for Ger- many, F.R. (DIN), Spain (AENOR) and Italy (UNI). However, only the terms given in the official languages can be considered as IS0 terms.

Woodworking machines -- Single-end tenoning machines with several spindles -- Nomenclature

GSO ISO 9615:2013 木工机械 用于通过液压夹紧生产木丝的立式铣床 术语

This International Standard specifies the nomenclature appropriate to the various parts of vertical shredding machines for wood wool production, with hydraulic clamping, in order to assist manufacturers and users in the identification of these parts. NOTE - In addition to terms used in two of the three official IS0 languages (English and French), this International Standard gives the equivalent terms in the German, Spanish and Italian languages; these are published under the responsibility of the member bodies for Ger- many, F.R. (DIN), Spain (AENOR) and Italy (UNI). However, only the terms given in the official languages can be considered as IS0 terms.

Woodworking machines -- Vertical shredding machines for wood wool production, with hydraulic clamping -- Nomenclature

GSO ISO 9537:2013 木工机械 单端封边机 术语

Abstract Specifies the nomenclature appropriate to the various parts of these edge bonding machines in order to assist manufacturers and used in the identification of these parts. Gives in addition to terms used in two of the three official ISO languages (English and French) the equivalent terms in German and Italian languages.

Woodworking machines -- Single-end edge bonding machines – Nomenclature

GSO ISO 9536:2013 木工机械 振动作业工具榫眼机 术语

This International Standard specifies the nomenclature appropriate to the various Parts of mortising machines with oscillating tool action in Order to assist manufacturers and users in the identification of these Parts. NOTE - In addition to terms used in two of the three official ISO languages (English and French), this International Standard gives the equivalent terms in the German, Spanish and Italian languages; these are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (AENOR) and Italy (UNI). However, only the terms given in the official languages tan be considered as ISO terms.

Woodworking machines -- Mortising machines with oscillating tool action – Nomenclature

GSO ISO 9267:2013 木工机械 磨刀机用带锯条 术语

This International Standard specifies the nomenclature appropriate to the various parts of bandsaw blade sharpening machines in order to assist manufacturers and users in the identification of these parts. NOTE - In addition to terms used in the three official IS0 languages (English, French and Russian), this International Standard gives the equivalent terms in the German, Spanish, Italian and Swedish languages; these are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (AENOR), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as IS0 terms. This International Standard applies to those machines designated by the number 55.11 in IS0 79841)

Woodworking machines -- Bandsaw blade sharpening machines -- Nomenclature

GSO ISO 633:2013 软木塞 词汇

This International Standard defines cork as a raw material for the industry, as well as the terms to be used in describing the different forms in which cork may be found. This International Standard also indicates the terms and definitions concerning its main products, some of the operations to which cork may be submitted and anomalies that may be associated with it.

Cork – Vocabulary

GSO ISO 9265:2013 木工机械 多轴镗床 术语

This International Standard specifies the nomenclature appropriate to the various parts of multi-spindle boring machines in order to assist manufacturers and users in the identification of these parts. NOTE - In addition to terms used in the three official IS0 languages (English, French and Russian), this International Standard gives the equivalent terms in the German, Spanish, Italian and Swedish languages; these are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (AENOR), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as IS0 terms. This International Standard applies to those machines designated by the number 12.42 in IS0 79841

Woodworking machines -- Multi-spindle boring machines -- Nomenclature

GSO ISO 9558:2013 木工机械 木工机械 术语

This International Standard specifies the nomenclature appropriate to the various parts of veneer slicing machines in order to assist manufacturers and users in the identification of these parts. NOTE - In addition to terms used in two of the three official IS0 languages (English and French), this International Standard gives the equivalent terms in the German, Spanish and Italian languages; these are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (AENOR) and Italy (UNI). However, only the terms given in the official languages can be considered as IS0 terms.

Woodworking machines -- Veneer slicing machines – Nomenclature