01.040.83 橡胶和塑料工业 (词汇) 标准查询与下载
共找到 119 条与 橡胶和塑料工业 (词汇) 相关的标准，共 8 页
Plastics - Vocabulary - Amendment 1: Additional items (ISO 472:2013/Amd 1:2018)
- ICS
- 01.040.83
- CCS
- 发布
- 2018-12-12
- 实施
- 2019-03-31
1.1 This classification covers instructions for naming the reference materials used by Committee D24. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Classification for Nomenclature of Reference Materials of Committee D24
- ICS
- 01.040.83
- CCS
- 发布
- 2018-11-01
- 实施
Plastics — Vocabulary — Amendment 1: Additional items
- ICS
- 01.040.83
- CCS
- 发布
- 2018-10-31
- 实施
1.1 This practice covers a uniform, consensus nomenclature approach for thermoplastic elastomers. This compilation is intended to accommodate and supplement any existing trade names and trademarks. 1.2 No attempt is made to develop an exclusively systematic process for nomenclature and abbreviations. 1.3 In technical papers and other technical or trade literature the full name of the thermoplastic elastomer should be given at its first appearance in the document along with its abbreviation in parentheses. In all subsequent references to the thermoplastic elastomer, the abbreviation may be given. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
- ICS
- 01.040.83
- CCS
- 发布
- 2018-06-01
- 实施
1.1 This classification covers instructions for naming the reference materials used by Committee D24. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Classification for Nomenclature of Reference Materials of Committee D24
- ICS
- 01.040.83
- CCS
- 发布
- 2018-06-01
- 实施
1.1 This terminology covers a compilation of definitions of technical terms used in the carbon black and rubber industries. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology Relating to Carbon Black
- ICS
- 01.040.83
- CCS
- 发布
- 2018-06-01
- 实施
Standard Terminology Relating to Carbon Black
- ICS
- 01.040.83
- CCS
- 发布
- 2017-12-01
- 实施
Standard Terminology Relating to Carbon Black
- ICS
- 01.040.83
- CCS
- 发布
- 2017-12-01
- 实施
Standard Terminology Relating to Carbon Black
- ICS
- 01.040.83
- CCS
- 发布
- 2017-10-01
- 实施
ISO 18064:2014 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks
Thermoplastic elastomers -- Nomenclature and abbreviated terms
- ICS
- 01.040.83
- CCS
- 发布
- 2016-12-22
- 实施
4.1 This practice provides a standardized terminology and a review of some basic concepts for elementary sampling and testing. These operations are important for: (1) local or intralaboratory testing that generally applies to internal quality control, process capability or performance evaluation, as well as development programs, and (2) global or interlaboratory testing that applies to producer-user and other testing programs that have industry-wide or worldwide scope. It is recognized that certain test methods may require more detailed and specialized sampling operations than the generic ones as described herein. These specialized sampling procedures should utilize, as far as possible, the basic concepts as given in this practice. 4.2 This practice provides a list of terms and concepts that may be used in numerous test methods used by Committees D11 and D24. It improves communication among those that conduct testing in the rubber and carbon black manufacturing industries and those that use such testing and test results for technical decisions. 1.1 This practice covers a standardized terminology and some basic concepts for testing and sampling across the broad range of chemical and physical testing operations characteristic of the rubber and carbon black manufacturing industries. 1.2 In addition to the basic concepts and terminology, a model for the test measurement process is given in Annex A1. This serves as a mathematical foundation for the terms and other testing concepts. It may also find use for further development of this practice to address more complex sampling operations. 1.3 This general topic requires a comprehensive treatment with a sequential or hierarchical development of terms with substantial background discussion. A number of ancillary terms are also given that make for a more self-contained document. This cannot be accommodated in Terminology D1566. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Sampling in Rubber Testing&x2014;Terminology and Basic Concepts
- ICS
- 01.040.83
- CCS
- 发布
- 2016-06-01
- 实施
4.1 The purpose of this classification system is to provide a method of adequately identifying plastic materials in order to give industry a system that can be used universally for plastic materials. It further provides a means for specifying these materials by the use of a simple line call-out designation. 4.2 This classification system was developed to permit the addition of property values for future plastics. 1.1 This standard provides a classification system for tabulating the properties of unfilled, filled, and reinforced plastic materials suitable for processing into parts. Note 1: The classification system serves many of the needs of industries using plastic materials. The standard is subject to revision as the need requires; therefore, the latest revision should always be used. 1.2 The classification system and subsequent line call-out (specification) is intended to be a means of identifying plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection should be made by those having expertise in the plastics field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the inherent properties of the material not covered in this document, and the economic factors. 1.3 This classification system is based on the premise that plastic materials can be arranged into broad generic families using basic properties to arrange the materials into groups, classes, and grades. A system is thus established which, together with values describing additional requirements, permits as complete a description as desired of the selected material. 1.4 In all cases where the provisions of this classification system would conflict with the referenced ASTM specification for a particular material, the latter shall take precedence. Note 2: When using this classification system the two-letter, three-digit suffix system applies. Note 3: When a material is used to fabricate a part where the requirements are too specific for a broad material call-out, it is advisable for the user to consult the supplier to secure a call-out of the properties to suit the actual conditions to which the part is to be subjected. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Classification System for Specifying Plastic Materials
- ICS
- 01.040.83
- CCS
- 发布
- 2016
- 实施
Scope is not provided for this standard
Definitions of some terms used in the tyre industry -- Part 1: Pneumatic tyres
- ICS
- 01.040.83
- CCS
- 发布
- 2015-12-21
- 实施
This International Standard establishes unambiguous symbols and abbreviated terms for commonly used rubber compounding ingredients of known, specific chemical composition.
Rubber compounding ingredients -- Symbols and abbreviated terms
- ICS
- 01.040.83
- CCS
- 发布
- 2015-09-03
- 实施
