01.040.83 橡胶和塑料工业 (词汇) 标准查询与下载

GSO ISO/TR 8517:2015 橡胶或塑料覆盖的滚筒（海豚） -术语表

This Technical Report contains definitions of terms currently used in the roller covering industry. It does not include general rubber industry terms, e.g. vulcanization, shore hardness, etc., for which reference should be made to ISO 1382; nor does it include mechanical engineering terms such as axis, web, etc. NOTES 1 When a term has one or more synonyms, the synonymous terms follow the preferred term. 2 For the purposes of the definitions in this Technical Report,"roller" is treated as a synonym for "rubber- or plastics-covered roller". Therefore care should be taken to ensure that the word is not used out of context, because it does have other meanings. 3 For the purposes of the definitions in this Technical Report, "rubber" as defined in ISO 1382 is treated as a synonym for "soft rubber" or "hard rubber" or "ebonite". The term "rubber" can be replaced by "plastics" as defined in ISO 472 or "elastomer" without change in meaning. It will be understood that the properties of a roller cover vary depending on its composition and surface finish, and therefore it should not be assumed that rubbers, ebonite and plastics are interchangeable.

Rubber- or plastics-covered rollers -- Glossary

ASTM D1566-15 有关橡胶的标准术语

1.1 This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 Definitions for terms that have been established by other bodies recognized as expert in the field will, after ballot approval, be inserted in this terminology without change, and the source of the definition will be identified. Exceptions to this rule will be where the meaning of the term as used in the rubber industry is different from the common meaning of the term. 1.3 Users of this terminology who require mathematical expressions for the time and temperature dependent physical properties of some terms found in this standard should refer to Guide D5992 and other standards listed under referenced documents. Selected terms from Guide D5992 may be found in Annex A1. 1.4 Although this terminology standard avoids the inclusion of jargon and archaic terms as much as possible, some terms have been retained for historical reasons.

Standard Terminology Relating to Rubber

ASTM D3053-15 碳黑相关标准术语

1.1 This terminology covers a compilation of definitions of technical terms used in the carbon black and rubber industries. Terms that are generally understood or adequately defined in other readily available sources are not included.

Standard Terminology Relating to Carbon Black

ASTM D907-15 粘合剂的标准术语

1.1 This terminology standard is a compilation of definitions used in the science and technology of the adhesives industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 Any changes in this standard since 1988 are documented as follows: 1.2.1 Appendix X1 gives a history of revisions made since 1988. Table X1.1 lists the terms that are affected as: (1) Terms Added, (2) Terms Revised, and (3) Terms Deleted. 1.2.1.1 In Table X1.1, the year of publication in Volume 15.06 is shown in parentheses following the term. 1.2.2 In the text of the standard, the year of publication is shown following each definition. Also, the following codes are included after the year of publication to describe the type change that was made: (A) Addition, (R) Revision, or (E) Edited. 1.2.3 Deletions are shown in Appendix X1, suitably footnoted. The deleted terms do not appear in the text of the standard. 1.2.4 Any special circumstances not covered by 1.2.2 and 1.2.3 are documented in Table X1.1, suitably footnoted.

Standard Terminology of Adhesives

GSO ISO 4223-2:2014 轮胎行业中使用的一些术语的定义 第2部分：实心轮胎

This part presents definitions of terms, in English and French, relating to solid tyres, in particular: general definitions, definitions concerning structure, components and dimensions of solid tyres. For definitions of terms relating to pneumatic tyres see Part 1. For other terms used in this field, together with their equivalents in other languages see ISO 3877. For terms relating to wheels/rims, and their definitions see ISO 3911. This second edition cancels and replaces the first edition (1983), in which definitions 1.2 and 2.1 have been modified.

Definitions of some terms used in the tyre industry -- Part 2: Solid tyres

CAB 1027-2014 汽车罩

本标准规定了汽车罩的要求,检验方法,检验规则以及标志、包装、运输和贮存。本标准适用于以聚丙烯(PP)无纺布类、聚乙烯(PE)复合类、聚氯乙烯(PVC)复合类、涂层布类、牛津布类为材质汽车罩,其他材质的汽车罩参照使用。

Car covers

GSO ISO 3877-4:2013 轮胎、气门嘴和内胎 等效术语列表 第4部分：实心轮胎

Gives the terms in three columns, the first one gives the English terms. The second column gives the French terms, and the third column gives Russian terms; these terms are repeated in alphabetical indexes.

Tyres, valves and tubes -- List of equivalent terms -- Part 4: Solid tyres

GSO ISO 3877-2:2013 轮胎、气门嘴和内胎 等效术语列表 第2部分：轮胎气门嘴

This part of ISO 3877 presents a list of equivalent tyre valve terms commonly used in the tyre industry. The terms are arranged in two columns. The first column gives the English terms in alphabetical order. The second column gives the equivalent French terms. In each column, synonyms are separated by a semicolon (;). The figures of annex A illustrate some of the terms presented in this part of ISO 3877. The figures are intended to illustrate and define terminology commonly used and do not imply any technical standard.

Tyres, valves and tubes -- List of equivalent terms -- Part 2: Tyre valves

GSO ISO 3877-3:2013 轮胎、阀门和内胎 等效术语列表 第3部分：内胎

Gives the terms in three columns, the first one gives the English, the second the French and the third one the Russian terms. The principal terms (1 to 12) are illustrated in the figure. In addition an annex gives the equivalent terms in the Italian language.

Tyres, valves and tubes -- List of equivalent terms -- Part 3: Tubes

GSO ISO 3877-1:2013 轮胎、气门嘴和内胎 等效术语列表 第1部分：轮胎

This part of ISO 3877 presents a list of equivalent tyre terms commonly used in the tyre industry. The terms are arranged in three columns. The first column gives the English terms in alphabetical order. The second column gives the English terms used in the USA and it should be noted that such terms are not necessarily in alphabetical order. An alphabetical index of the English (USA) terms is located at the end of this part of ISO 3877. The third column gives the equivalent French terms. In each column, synonyms are separated by a semicolon (;). Some of the basic terms relating to tyres are illustrated in figures 1 and 2. Definitions of some terms presented in this part of ISO 3877 are given in ISO 4223-1 and ISO 4223-2. For terms relating to wheels/rims and definitions, see ISO 3911.

Tyres, valves and tubes -- List of equivalent terms -- Part 1: Tyres

GSO ISO 8604:2013 塑料 预浸料 术语和名称符号的定义

This International Standard defines, in English and French, the terms and Symbols used in the designation, production and use of crosslinkable prepregs.

Plastics - Prepregs - Definitions of terms and symbols for designations

ASTM D883-12e1 塑料相关标准术语

1.1 This terminology covers definitions of technical terms used in the plastics industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee D20 is responsible it is included only when judged, after review, by Subcommittee D20.92 to be a generally usable term. 1.3 Definitions that are identical to those published by another standards body are identified with the abbreviation of the name of the organization; for example, IUPAC is the International Union of Pure and Applied Chemistry. 1.4 A definition is a single sentence with additional information included in discussion notes. It is reviewed every 5 years; the year of last review is appended. 1.5 For literature related to plastics terminology, see Appendix X1.

Standard Terminology Relating to Plastics

GOST R 54559-2011 纤维增强热固性塑料管道和管道零件.术语和定义

Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions

GSO ASTM F538:2010 与轮胎特性和性能相关的标准术语

1.1 This terminology primarily covers definitions for technical terms that occur in ASTM Committee F09 standards on the characteristics and performance of tires. 1.2 Definitions for terms that may also be used in other technologies, such as vehicle behavior, are worded to cover both areas. 1.3 When any definition in this terminology (that does not have the limiting phrase) is quoted out of context, editorially insert the limiting phrase in a tire after the dash following the term. This will properly limit the field of application of the term and definition.

Standard Terminologies Relating to the Characteristics and Performance of Tires

KS M ISO 4223-1:2009 轮胎工业用一些术语的定义.第1部分:充气轮胎

이 표준은 타이어 산업에서 사용되는 공기 타이어와 관련된 용어 정의와 이에 상응하는 약호,

Definitions of some terms used in the tyre industry-Part 1:Pneumatic tyres

ASTM F1806-97(2008) 轮胎试验操作的标准实施规程.参考轮胎使用的基本概念和术语

Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use

ISO 1629:1995/Amd 1:2007 橡胶和胶乳.术语.修改件1

Rubber and latices — Nomenclature — Amendment 1

GSO ISO 1382:2007 橡胶 术语

This International Standard defines terms used in the rubber industry. The terms are listed alphabetically in English but are also described and defined in French and, in most cases, in Russian. Some terms have parenthetical information added to indicate a specific limitation of the term to a particular field, for example “?rubber latex?”. Unless indicated otherwise, all terms are nouns.

Rubber-Vocabulary

HS/T 10-2006 初级形状线性低密度聚乙烯的鉴别方法

本标准规定了用差示扫描量热分析方法对初级形状低密度聚乙烯和初级形状线性低密度聚乙烯的鉴别方法。 本标准适用于初级形状低密度聚乙烯和线性低密度聚乙烯的区分和鉴定。 本标准不适用于着色、填充、增强、改性的低密度聚乙烯和线性低密度聚乙烯的区分和鉴定。

Identification of linear low density polyethylene in primary forms

ASTM D4092-07 标准术语:塑料:动态力学性能

1.1 This terminology is a compilation of definitions and descriptions of technical terms used in dynamic mechanical property measurements on polymeric materials, including solutions, melts, and solids. Terms that are generally understood or defined adequately in other readily available sources are either not included or sources identified.1.2 A definition is a single sentence with additional information included in notes. It is reviewed every five years and the year of the last review or revision is appended.1.3 Definitions identical to those published by another standards organization or ASTM committee are identified with the abbreviation of the name of the organization or the ASTM committee.1.4 Descriptions of terms specific to dynamic mechanical measurements are identified with an italicized introductory phrase. This terminology standard is similar to ISO 6721-1 however, the ISO document cites fewer terms.

Standard Terminology: Plastics: Dynamic Mechanical Properties