01.040.83 橡胶和塑料工业 (词汇) 标准查询与下载
共找到 119 条与 橡胶和塑料工业 (词汇) 相关的标准，共 8 页
Thermoplastic elastomers - Nomenclature and abbreviated terms
- ICS
- 01.040.83
- CCS
- 发布
- 2005-02-01
- 实施
1.1 This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included.1.2 Definitions for terms that have been established by other bodies recognized as expert in the field will, after ballot approval, be inserted in this terminology without change, and the source of the definition will be identified. Exceptions to this rule will be where the meaning of the term as used in the rubber industry is different from the common meaning of the term.1.3 Users of this standard who require mathematical expressions for the time and temperature dependent physical properties of some terms found in this standard should refer to D5992 Standard Guide for Dynamic Testing of Rubber and Rubber-Like Materials Using Vibratory Methods and other standards listed under referenced documents. Selected terms from D5992 may be found in the Annex1.4 Although this terminology standard avoids the inclusion of jargon and archaic terms as much as possible, some terms have been retained for historical reasons.
Standard Terminology Relating to Rubber
- ICS
- 01.040.83
- CCS
- 发布
- 2004-02-01
- 实施
List of equivalent terms－Tires related industrial fibers
- ICS
- 01.040.83
- CCS
- 发布
- 2003-05-31
- 实施
List of equivalent terms－Tires related industrial fibers
- ICS
- 01.040.83
- CCS
- 发布
- 2001-12-31
- 实施
List of equivalent terms－Tires related industrial fibers
- ICS
- 01.040.83
- CCS
- 发布
- 2001-12-31
- 实施
1.1 This terminology is a compilation of definitions and descriptions of technical terms used in dynamic mechanical property measurements on polymeric materials, including solutions, melts, and solids. Terms that are generally understood or defined adequately in other readily available sources are either not included or sources identified.1.2 A definition is a single sentence with additional information included in notes. It is reviewed every five years and the year of the last review or revision is appended.1.3 Definitions identical to those published by another standards organization or ASTM committee are identified with the abbreviation of the name of the organization or the ASTM committee; for example, ICTA is the International Conference on Thermal Analysis and- ISO is the International Standards Organization, Specifically ISO 472: 1988 (E/F) document.1.4 Descriptions of terms specific to dynamic mechanical measurements are identified with an italicized introductory phrase. Note 18212;This terminology is similar to ISO 6721-1 1994 in title only. The ISO document cites only 13 terms and this terminology defines 49 relevant terms.
Standard Terminology: Plastics: Dynamic Mechanical Properties
- ICS
- 01.040.83
- CCS
- 发布
- 2001-09-10
- 实施
Glossary of terms used in the adhesives industry
- ICS
- 01.040.83
- CCS
- 发布
- 2001
- 实施
- 2001
1.1 This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included.1.2 Definitions for terms that have been established by other bodies recognized as expert in the field will, after ballot approval, be inserted in this terminology without change, and the source of the definition will be identified. Exceptions to this rule will be where the meaning of the term as used in the rubber industry is different from the common meaning of the term.1.3 Users of this standard who require mathematical expressions for the time and temperature dependent physical properties of some terms found in this standard should refer to D5992 Standard Guide for Dynamic Testing of Rubber and Rubber-Like Materials Using Vibratory Methods and other standards listed under referenced documents. Selected terms from D5992 may be found in the Annex1.4 Although this terminology standard avoids the inclusion of jargon and archaic terms as much as possible, some terms have been retained for historical reasons.
Standard Terminology Relating to Rubber
- ICS
- 01.040.83
- CCS
- 发布
- 2000-11-10
- 实施
本标准规定了以PVC树脂为主要原料生产的具有难燃性能的线槽和难燃冷弯性能的套管（俗称冷弯管）及其配件的产品分类、技术要求、试验方法、检验规则及标志与使用说明书、包装、运输、贮存；本标准适用于工业与民用建筑、厂、矿电器设备的电线、电缆安装、装饰与安全保护。
Flame-retardant PVC plastic tanks, pipes and fittings
- ICS
- 01.040.83
- CCS
- G33
- 发布
- 2000-08-03
- 实施
- 2000-10-01
本标准规定了聚碳酸酯(PC)热塑性材料的命名方法。 本标准适用于双酚A型聚碳酸酯树脂，也适用于改性(增强、填充、共混)的双酚A型聚碳酸酯 材料。 本标准不提供材料具体应用或加工所需的工程数据、性能数据或加工条件。 本标准并不意味着命名相同的材料必定具有相同的性能。
Polycarbonate(PC) moulding and extrusion materials.Designation system
- ICS
- 01.040.83
- CCS
- G31
- 发布
- 1999-04-20
- 实施
- 2000-04-01
本标准适用于塑料工业之中英文用语及其释义。备考：本标准 { } 内之单位系公制，数值为近似值。
Glossary of terms used in plastic industry
- ICS
- 01.040.83
- CCS
- 发布
- 1998-09-29
- 实施
- 1998-09-29
本标准规定橡胶工业所用之主要用语。
Glossary of Terms Used in Rubber Industry
- ICS
- 01.040.83
- CCS
- 发布
- 1996-07-24
- 实施
- 1996-07-24
Plastics — Vocabulary — Amendment 3: General terms and terms relating to degradable plastics
- ICS
- 01.040.83
- CCS
- 发布
- 1993-12-02
- 实施
Plastics — Vocabulary — Amendment 4: Basic terms in polymer science
- ICS
- 01.040.83
- CCS
- 发布
- 1993-12-02
- 实施
Plastics — Vocabulary — Amendment 1: Terms relating to individual macromolecules, their assemblies, dilute polymer solutions and crystalline polymers
- ICS
- 01.040.83
- CCS
- 发布
- 1993-12-02
- 实施
この規格は，粘着テープ及び祐着シートに関する用語及ぴその定義について規定する。
Glossary of terms used in pressure sensitive adhesive tapes and sheets
- ICS
- 01.040.83
- CCS
- A82
- 发布
- 1992-08-01
- 实施
Rubber products Miscellaneous goods terms
- ICS
- 01.040.83
- CCS
- G40
- 发布
- 1988-07-04
- 实施
- 1989-05-01
Standard definitions of terms relating to rubber compounding ingredients excluding carbon black
- ICS
- 01.040.83
- CCS
- G34
- 发布
- 1988-07-04
- 实施
- 1989-05-01
本标准规定了火焰对硫化橡胶制品作用的实验室试验术语及其定义。在制、修订标准及编写技术文件、书刊时，如用到其中有关术语应按照本照本标准执行。
Fire tests terms for rubber
- ICS
- 01.040.83
- CCS
- G40
- 发布
- 1988-07-04
- 实施
- 1989-05-01
