01.080.99 其他图形符号 标准查询与下载

GB/T 40142-2021 触摸图形设计及图例

本文件规定了触摸图形的组成要素、设计、校对及图例。 本文件适用于触摸图形的设计、制作、应用。

Tactile graphics designing and symbols

GB/T 30686-2014 馆藏青铜质和铁质文物病害与图示

本标准规定了馆藏青铜质和铁质文物病害的基本术语、病害及其图示。本标准适用于博物馆、考古所等文物收藏保管单位收藏的青铜质和铁质文物病害的记录与图示。

Bronze and iron collection's disease and illustration

GB/T 30688-2014 馆藏砖石文物病害与图示

本标准规定了馆藏砖石文物的相关术语和病害的类型以及与病害相对应的图示。本标准适用于馆藏砖石文物病害调查、认定、分类、评估等文物保护实践中的病害认知和图示工作。

Stone and brick collection's disease and illustration

GB/T 18028-2010 中国盲文数学、物理、化学符号

本标准规定了窜文数学,物理.化学符号的写法和使用规则。 本标准适用于襄广教育.由版发有关的考个领域。 2 规范性避用文体

Mathematical,physical and chemical symbols of Chinese Braille

GB/T 11617-2000 辞书编纂符号

本标准规定了辞书编纂符号及其用法。 本标准适用于： ——语文辞书 ——专业辞书 ——词汇集 ——术语库 ——有关辞书编纂和信息文献工作的著作 本标准不涉及术语标准编排格式中所使用的规则，有关这方面的内容见GB/T 1.6-1997。

Lexicographical symbols

GB/T 18028-2000 中国盲文数学、物理、化学符号

本标准规定了中国盲文数学、物理、化学符号的书写和使用方法。 本标准适用于盲文教育、出版及有关的各个领域。

Mathematical,physical and chemical symbols of Chinese braille

GB/T 16660-1996 选煤厂用图形符号

本标准规定了选煤厂常用设备（设施）图形符号，适用于选煤厂的设备流程图、工艺流程图、集中控制室模拟盘和有关选煤工艺的图解等。

Coal preparation plant--Graphical symbols

DB42/T 2188-2024 瓷器文物病害与图示

Diseases and Illustrations of Porcelain Cultural Relics

DB44/T 2437-2023 审批服务便民化 政务服务事项容缺服务规范

本文件适用于全省各级各部门开展政务服务事项（涉及国家公共安全等事项除外）容缺服务工作。

Approval services, convenient government service matters, and service standards for vacancies

DB44/T 2436-2023 审批服务便民化 首席服务规范

本文件适用于全省各级政务服务管理部门、政务服务中心及进驻部门开展首席服务工作。

Chief Service Standards for Convenient Approval Services

HY/T 0356-2023 海洋调查专题图分类、编码与制图格式

Classifications,codes and formats for the oceanographic survey thematic maps

KS A 6200-2021 韩国传统图案分类系统

A korean traditional pattern classification system

KS A 6201-2021 韩国传统屋顶瓦图案分类系统

A korean traditional roofing tile pattern classification system

GSO ISO 780:2021 包装 分销包装 用于处理和储存包装的图形符号

ISO 780:2015 specifies a set of graphical symbols conventionally used for marking of distribution packages in their physical distribution chain to convey handling instructions. The graphical symbols should be used only when necessary. ISO 780:2015 is applicable to packages containing any kind of goods, but does not include instructions specific to handling of dangerous goods.

Packaging — Distribution packaging — Graphical symbols for handling and storage of packages

GOST 34757-2021 配送包装 处理和储存包裹的图形符号

Distribution packaging. Graphical symbols for handling and storage of packages

PNS ISO 21531:2021 牙科学.牙科器械的图形符号

Dentistry - Graphical symbols for dental instruments

ASTM E2631-20 实体控制补充标识标签的物理放置标准实践

1.1 This practice is for supplemental identification labels assigned by an entity and affixed to equipment to permit control. 1.2 Identifying labels include, but are not limited to, removable tags, bands, and plates. 1.3 This practice is not intended for material or manufacturer’s warranties. 1.4 This practice is not intended for markings of original equipment manufacturers (OEMs). 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label

T/RAC 017-2019 无线电监测图例规范

本规范规定的无线电监测图例覆盖超短波、短波和卫星频段，包括固定监测站、移动监测站和可搬移监测站，以及压制系统和指挥控制中心，并根据监测站功能不同区分监测、测向或定位。本规范根据实际工作需要，对超短波频段固定监测站和可搬移监测站区分监测和测向，并默认测向站同时具备监测功能，短波和卫星频段未作此区分。本规范规定的无线电监测图例还包括指挥控制中心、车载压制和可搬移压制等共计20种图例。

Graphic symbols specification for radio monitoring

EN ISO 10318-2:2015/A1:2018 土工合成材料第2部分:符号和象形图 包含修改件A1,2018

Geosynthetics - Part 2: Symbols and pictograms - Amendment 1 (ISO 10318-2:2015/Amd 1:2018)

ISO 10318-2:2015/Amd 1:2018 土工合成材料第2部分:符号和象形图修改1

Geosynthetics — Part 2: Symbols and pictograms — Amendment 1