03.120.30 统计方法的应用 标准查询与下载

KS Q ISO 3301-2021 数据的统计解释 配对观测情况下两种平均值的比较

Statistical interpretation of data－Comparison of two means in the case of paired observations

KS Q ISO 22514-1-2021 过程管理中的统计方法 能力和绩效 第1部分：一般原则和概念

Statistical methods in process management — Capability and performance — Part 1: General principles and concepts

KS Q ISO 3494-2021 数据的统计解释 第4部分：均值和方差相关检验的功效

Statistical interpretation of data－Part 4：Power of tests relating to means and variances

KS Q ISO 22514-6-2021 过程管理中的统计方法 能力和性能 第6部分：遵循多元正态分布的特征的过程能力统计

Statistical methods in process management — Capability and performance — Part 6: Process capability statistics for characteristics following a multivariate normal distribution

ISO 22514-7:2021 过程管理中的统计方法能力和性能第7部分:测量过程的能力

This document defines a procedure to validate measuring systems and a measurement process in order to state whether a given measurement process can satisfy the requirements for a specific measurement task with a recommendation of acceptance criteria. The acceptance criteria are defined as a capability figure (CMS, CMP) or a capability ratio (QMS, QMP). NOTE This document follows the approach taken in ISO/IEC Guide 98-3 (GUM), and establishes a basic, simplified procedure for stating and combining uncertainty components used to estimate a capability index for an actual measurement process. This document is primarily developed to be used for simple one-dimensional measurement processes, where it is known that the method uncertainty and the specification uncertainty are small compared to the implementation uncertainty. It can also be used in similar cases, where measurements are used to estimate process capability or process performance. It is not suitable for complex geometrical measurement processes, such as surface texture and position measurements that rely on several measurement points or simultaneous measurements in several directions.

Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes

T/TMAC 034.F-2021 基于多维指标的电视节目综合评价规范

本文件规定了基于多维指标的电视节目综合评价原则、评价体系和数据来源与权重分配的基本规范。

A Comprehensive Evaluation Specification for TV Programs Based on Multidimensional Indexes

T/TMAC 035.F-2021 电视受众调查规范

本文件规定了电视受众调查的总则、数据基础与调查方法、数据采集、数据处理、数据报告、数据使用的基本规范。

TV Audience Survey Specifications

UNI ISO 16337:2021 统计和相关方法在新技术和产品开发过程中的应用 稳健公差设计（RTD）

Application of statistical and related methods to new technology and product development process - Robust tolerance design (RTD)

GSO ISO 16355-1:2021 统计及相关方法在新技术和产品开发过程中的应用 第1部分：质量功能展开（QFD）的一般原则和观点

ISO 16355-1:2015 describes the quality function deployment (QFD) process, its purpose, users, and tools. It is not a management system standard. It does not provide requirements or guidelines for organizations to develop and systematically manage their policies, processes, and procedures in order to achieve specific objectives. Users of ISO 16355-1:2015 will include all organization functions necessary to assure customer satisfaction, including business planning, marketing, sales, research and development (R&D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, and other phases in hardware, software, service, and system organizations.

Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment (QFD)

GSO ISO/TR 16355-8:2021 统计及相关方法在新技术和产品开发过程中的应用 第8部分：商业化和生命周期指南

ISO/TR 16355-8:2017 describes after optimization of product design to address non-functional requirements, for example, test, produce, commercialize, deliver, support, and eventually retire a product from the market and provides guidance on the use of the applicable tools and methods. The goal is to identify and assure key processes and measures in order to satisfy and deliver value to customers and stakeholders. The topics in this document are not exhaustive and vary according to industry, product, and markets. They are considered a guide to encourage users of this document to explore activities needed to accomplish the same goal for their products. NOTE Some of the activities described in this document can be used at an earlier stage. Users of this document include all organization functions necessary to assure customer satisfaction, including business planning, marketing, sales, research and development (R&D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, business process design, and other phases in hardware, software, service, and system organizations.

Applications of statistical and related methods to new technology and product development process — Part 8: Guidelines for commercialization and life cycle

GSO ISO 16355-4:2021 统计及相关方法在新技术和产品开发过程中的应用 第4部分：非定量和定量客户之声和利益相关者之声分析

ISO 16355-4:2017 describes the analysis of the voice of the customer (VOC) and the voice of the stakeholder (VOS). These include translation of VOC and VOS into true customer needs, prioritization of these needs, and competitive benchmarking of alternatives from the customer's perspective. This document also provides recommendations on the use of the applicable tools and methods. Users of this document include all organization functions necessary to ensure customer satisfaction, including business planning, marketing, sales, research and development (R and D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, and other phases in hardware, software, service, and system organizations.

Applications of statistical and related methods to new technology and product development process — Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder

GSO ISO 13528:2021 实验室间比较能力验证中使用的统计方法

ISO 13528:2015 provides detailed descriptions of statistical methods for proficiency testing providers to use to design proficiency testing schemes and to analyse the data obtained from those schemes. It provides recommendations on the interpretation of proficiency testing data by participants in such schemes and by accreditation bodies. The procedures in ISO 13528:2015 can be applied to demonstrate that the measurement results obtained by laboratories, inspection bodies, and individuals meet specified criteria for acceptable performance. ISO 13528:2015 is applicable to proficiency testing where the results reported are either quantitative measurements or qualitative observations on test items.

Statistical methods for use in proficiency testing by interlaboratory comparison

GSO ISO/TR 12845:2021 部分因子筛选实验的精选插图

ISO/TR 12845:2010 describes the steps necessary to use and to analyse two-level fractional factorial designs through illustration with six distinct applications of this methodology.

Selected illustrations of fractional factorial screening experiments

GSO ISO/TR 14468:2021 属性一致性分析图选

ISO/TR 14468:2010 assesses a measurement process where the characteristic(s) being measured is (are) in the form of attribute data (including nominal and ordinal data). ISO/TR 14468:2010 provides examples of attribute agreement analysis (AAA) and derives various results to assess closeness of agreement amongst appraisers, such as agreement within appraisers, agreement between appraisers, agreement of each appraiser vs. a standard, and agreement of all appraisers vs. a standard.

Selected illustrations of attribute agreement analysis

GSO ISO 16355-5:2021 统计及相关方法在新技术和产品开发过程中的应用 第5部分：解决方案策略

ISO 16355-5:2017 describes the process of developing a solution strategy for new products. Since organizations can address their new product development process by a customer-driven or a technology-driven set of solutions, this document explains both alternatives. It provides recommendations on the use of the applicable tools and methods, offering guidance on translating the voice of the customer (VOC) and voice of the stakeholder (VOS) into product, service, information, and process attributes, transferring the priorities of the customer and stakeholder needs into priorities for these attributes, and then developing technology, cost, and reliability plans for attributes. Users of this document include all organization functions necessary to ensure customer satisfaction, including business planning, marketing, sales, research and development (R&D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, and other phases in hardware, software, service, and system organizations.

Applications of statistical and related methods to new technology and product development process — Part 5: Solution strategy

GSO ISO 7870-6:2021 控制图 第6部分：EWMA 控制图

ISO 7870-6:2016 covers EWMA control charts as a statistical process control technique to detect small shifts in the process mean. It makes possible the faster detection of small to moderate shifts in the process average. In this chart, the process average is evaluated in terms of exponentially weighted moving average of all prior sample means. EWMA weights samples in geometrically decreasing order so that the most recent samples are weighted most highly while the most distant samples contribute very little depending upon the smoothing parameter (λ).

Control charts — Part 6: EWMA control charts

GSO ISO 16355-2:2021 统计及相关方法在新技术和产品开发过程中的应用 第2部分：获取客户声音和利益相关者声音的非定量方法

ISO 16355-2:2017 describes the non-quantitative approaches in the acquisition of voice of customer (VOC) and voice of stakeholder (VOS) and its purpose, and provides recommendations on the use of the applicable tools and methods. It is not a management system standard. NOTE It does not provide requirements or guidelines for organizations to develop and systematically manage their policies, processes, and procedures in order to achieve specific objectives. Users of this document include all organization functions necessary to assure customer satisfaction, including business planning, marketing, sales, research and development (R&D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, and other phases in hardware, software, service, and system organizations.

Applications of statistical and related methods to new technology and product development process — Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder

GSO IEC 62309:2021 包含重复使用部件的产品的可靠性 功能和测试要求

Introduces the concept to check the reliability and functionality of reused parts and their usage within new products. Also provides information and criteria about the tests/analysis required for products containing such reused parts, which are declared "qualified-as-good-as-new" relative to the designed life of the product. The purpose of this standard is to ensure by tests and analysis that the reliability and functionality of a new product containing reused parts is comparable to a product with only new parts.

Dependability of products containing reused parts - Requirements for functionality and tests

GSO ISO/TR 13195:2021 响应面法图解选 中心组合设计

ISO/TR 13195:2015 describes the steps necessary to understand the scope of Response Surface Methodology (RSM) and the method to analyse data collected using Central Composite Designs (CCD) through illustration with four distinct applications of this methodology. Response surface methodology (RSM) is used in order to investigate a relation between the response and the set of quantitative predictor variables or factors. Especially after specifying the vital few controllable factors, RSM is used in order to find the factor setting which optimizes the response.

Selected illustrations of response surface method — Central composite design

GSO ISO/TR 16705:2021 实施六西格码的统计方法 列联表分析精选图解

ISO/TR 16705:2016 describes the necessary steps for contingency table analysis and the method to analyse the relation between categorical variables (including nominal variables and ordinal variables). It provides examples of contingency table analysis. Several illustrations from different fields with different emphasis suggest the procedures of contingency table analysis using different software applications. In ISO/TR 16705:2016, only two-dimensional contingency tables are considered.

Statistical methods for implementation of Six Sigma — Selected illustrations of contingency table analysis