11.060.10 牙科材料 标准查询与下载
共找到 1591 条与 牙科材料 相关的标准，共 107 页
This document specifies the requirements for acrylic hard type materials used as chairside denture base relining materials and the test methods to determine compliance with these requirements. This document also specifies requirements for packaging and marking the products and for the instructions for use to be supplied by the manufacturer. Dentures which are relined by chairside denture base relining materials specified by this document are limited to those of acrylic. This document is not applicable to either denture base relining materials that are for laboratory use or soft lining materials. NOTE 1 Acrylic hard type materials contain acrylic and methacrylic monomers such as acrylic acid esters and substituted (meth)acrylic acid esters and their polymers. NOTE 2 Acrylic dentures are made of polymers such as poly (acrylic acid esters), poly (substituted acrylic acid esters) and rubber-modified poly (methacrylic acid esters).
Dentistry - Chairside denture base relining materials - Part 1: Hard type materials (ISO 23401-1:2023)
- ICS
- 11.060.10
- CCS
- 发布
- 2023-03-29
- 实施
- 2023-06-30
This document specifies the requirements for acrylic hard type materials used as chairside denture base relining materials and the test methods to determine compliance with these requirements. This document also specifies requirements for packaging and marking the products and for the instructions for use to be supplied by the manufacturer. Dentures which are relined by chairside denture base relining materials specified by this document are limited to those of acrylic. This document is not applicable to either denture base relining materials that are for laboratory use or soft lining materials. NOTE 1 Acrylic hard type materials contain acrylic and methacrylic monomers such as acrylic acid esters and substituted (meth)acrylic acid esters and their polymers. NOTE 2 Acrylic dentures are made of polymers such as poly (acrylic acid esters), poly (substituted acrylic acid esters) and rubber-modified poly (methacrylic acid esters).
Dentistry — Chairside denture base relining materials — Part 1: Hard type materials
- ICS
- 11.060.10
- CCS
- 发布
- 2023-03-03
- 实施
- 2023-03
1 Scope This document specifies test methods for machinable ceramic blanks used for the fabrication of dental fixed restorations. This document also specifies the contents of the test report.
Dentistry. Machinable ceramic blanks
- ICS
- 11.060.10
- CCS
- 发布
- 2023-01-31
- 实施
- 2023-01-31
本文件规定了胶囊装银汞合金产品的性能要求和测试方法，该产品中一定比例的牙科银合金粉和牙科汞的装量适于制作单个牙齿充填体；规定了用于制备牙科银汞合金的牙科银合金粉和胶囊以及银汞合金的性能要求和试验方法，同时规定了对包装和标识的要求。本文件适用于标有“预装胶囊”的牙科银汞合金产品。本文件不适用于散装形式的可自由流动的银合金粉和片剂银合金粉，也不适用于汞包和散装汞。本文件不适用于利用金属合金粉末和液体合金在环境温度下反应生成固态金属材料的用于制作牙科修复体的金属材料。本文件不包含对可能的生物学危害的定性和定量要求，但推荐在评价可能的生物学危害时，参考GB/T 16886.1和YY/T 0268。
dental amalgam capsules
- ICS
- 11.060.10
- CCS
- C33
- 发布
- 2023-01-13
- 实施
- 2024-01-15
This document specifies the classification of and requirements for waxes used for dental casting (including products intended for CAD/CAM milling) using the lost-wax technique and dental baseplate preparation together with the test methods to be employed to determine compliance with these requirements. Solid polymer products (such as acrylics) for CAD/CAM work, and thermoplastic or photo-curing resins used in additive processes, are not covered by this document. This document does not include specific and quantitative requirements for freedom from biological hazards.
Dentistry — Casting and baseplate waxes
- ICS
- 11.060.10
- CCS
- 发布
- 2023-01-09
- 实施
Dentistry Hydrocolloid impression materials
- ICS
- 11.060.10
- CCS
- 发布
- 2022-12-28
- 实施
Dentistry — Endodontic obturating materials
- ICS
- 11.060.10
- CCS
- 发布
- 2022-12-28
- 实施
Dentistry — Test method for determining radio-opacity of materials
- ICS
- 11.060.10
- CCS
- 发布
- 2022-12-28
- 实施
Dentistry Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer based restorative materials
- ICS
- 11.060.10
- CCS
- 发布
- 2022-12-28
- 实施
Dentistry — Elastomeric impression and bite registration materials
- ICS
- 11.060.10
- CCS
- 发布
- 2022-12-28
- 实施
This document specifies test methods for machinable ceramic blanks used for the fabrication of dental fixed restorations. This document also specifies the contents of the test report.
Dentistry - Machinable ceramic blanks (ISO 18675:2022)
- ICS
- 11.060.10
- CCS
- 发布
- 2022-12-14
- 实施
- 2023-03-31
前言 1 范围 2 规范性引用文件 3 术语和定义 4 结构和分类 5 原材料要求 6 技术要求 7 试验方法 8 检验规则 9 标志、包装、使用说明、运输和贮存
Stainless steel orthodontic buccal tube
- ICS
- 11.060.10
- CCS
- C2770
- 发布
- 2022-11-12
- 实施
- 2022-11-17
1 Scope This document specifies requirements for zinc oxide-eugenol cements suitable for use in restorative dentistry for temporary cementation, for bases and as temporary restorations. This document also specifies requirements for non-eugenol zinc oxide cements containing zinc oxide and oil(s) other than eugenol for temporary cementation.
Dentistry. Zinc oxide-eugenol cements and non-eugenol zinc oxide cements
- ICS
- 11.060.10
- CCS
- 发布
- 2022-10-31
- 实施
- 2022-10-31
1 Scope This document specifies the requirements and test methods for dental brazing materials suitable for use in metallic restorations. Brazing materials with silver as the main component are excluded from this document.
Dentistry — Brazing materials
- ICS
- 11.060.10
- CCS
- 发布
- 2022-10-31
- 实施
- 2022-10-31
This document specifies requirements for zinc oxide-eugenol cements suitable for use in restorative dentistry for temporary cementation, for bases and as temporary restorations. This document also specifies requirements for non-eugenol zinc oxide cements containing zinc oxide and oil(s) other than eugenol for temporary cementation.
Dentistry - Zinc oxide-eugenol cements and non-eugenol zinc oxide cements (ISO 3107:2022)
- ICS
- 11.060.10
- CCS
- 发布
- 2022-10-19
- 实施
- 2023-01-31
This document specifies the requirements and test methods for dental brazing materials suitable for use in metallic restorations. Brazing materials with silver as the main component are excluded from this document.
Dentistry - Brazing materials (ISO 9333:2022)
- ICS
- 11.060.10
- CCS
- 发布
- 2022-10-05
- 实施
- 2023-01-31
1 Scope This document specifies requirements and test methods for metallic materials that are suitable for the fabrication of dental restorations and appliances . Included are metallic materials recommended for use either with or without a ceramic veneer , or recommended for both uses. Furthermore, this document specifies requirements for packaging and marking of the products and for the instructions for use of these materials, including products delivered for sale to a third party. This document does not apply to alloys for dental amalgam (see ISO 24234), dental brazing materials (see ISO 9333), or metallic materials for orthodontic appliances (e.g. wires, brackets, bands and screws). This document is not applicable to magnetic attachment, which are specified in ISO 13017.
Dentistry. Metallic materials for fixed and removable restorations and appliances
- ICS
- 11.060.10
- CCS
- 发布
- 2022-09-30
- 实施
- 2022-09-30
This document specifies requirements and test methods for metallic materials that are suitable for the fabrication of dental restorations and appliances. Included are metallic materials recommended for use either with or without a ceramic veneer, or recommended for both uses. Furthermore, this document specifies requirements for packaging and marking of the products and for the instructions for use of these materials, including products delivered for sale to a third party. This document does not apply to alloys for dental amalgam (see ISO 24234), dental brazing materials (see ISO 9333), or metallic materials for orthodontic appliances (e.g. wires, brackets, bands and screws). This document is not applicable to magnetic attachment, which are specified in ISO 13017.
Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2022)
- ICS
- 11.060.10
- CCS
- 发布
- 2022-09-21
- 实施
- 2022-12-31
