共找到 156 条与 相关的标准,共 11 页
Modification 1 of NF EN 60118-7-1993
Modification 1 of NF EN 60118-0-1993
This Standard describes a method of determining the physical performance of hearing aids using an induction pick-up coil within an audio-frequency magnetic field.
Hearing aids - Part 1: Hearing aids with induction pick-up coil input
Describes a method of determining electroacoustic performance of hearing aids fitted with an induction pick-up coil and used in an audio-frequency magnetic field.
Hearing aids - Hearing aids with induction pick-up coil input
Hearing aids. Part 1 : hearing aids with induction pick-up coil input.
This Standard describes methods of measurement to determine the immunity of hearing aids to radiated radiofrequency electromagnetic fields, in the frequency range 300 MHz to 3 GHz, and specifies electromagnetic immunity requirements and test levels. The Standard applies to hearing aids delivering acoustic outputs and includes those worn — (a) behind the ear (BTE); (b) in the ear (ITE); and (c) on the body; and includes hearing aids fitted with induction pick-up coils.
Hearing aids - Immunity requirements and methods of measurement for hearing aids exposed to radiofrequency fields in the frequency range 300 MHz to 3 GHz
Cancels and replaces the second edition (1983). Describes a method of determining the electroacoustic performance of hearing aids fitted with an induction pick-up coil and used in an audiofrequency magnetic field. Not intended to be used for the measurem
Hearing aids - Part 1: Hearing aids with induction pick-up coil input
Hearing aids; part 0: measurement of electroacoustical characteristics (IEC 60118-0:1983 + IEC 118-0 AMD 1:1994); German version EN 60118-0:1993 + A1:1994
Hearing aids; part 7: measurement of the performance characteristics of hearing aids for quality inspection for delivery purposes; amendment 1
Amends subclauses 3.3 and 5.4.6, replaces subclause 4.17.
Hearing aids; part 0: measurement of electroacoustical characteristics; amendment 1
Hearing aids. Part 0 : measurement of electroacoustical characteristics.
Hearing aids - Part 7 : measurement of performance characteristics of hearing aids for quality inspection for delivery purposes.
Adds 4 standards quoted, new definitions 4.8 (AGC activated frequency response) and 4.9 (Operating frequency range of the AGC), a new clause 9 (AGC activated frequency response of hearing aids with a single channel AGC circuit in operation using pure ton
Hearing aids; part 2: hearing aids with automatic gain control circuits; amendment 1
The document defines those dimensions which are essential in order to ensure interchangeability of insert earphones as used with earmoulds or other attachments to the ear.
Hearing aids; part 5: nipples for insert earphones (IEC 60118-5:1983); german version HD 450.5 S1:1985
This preliminary standard describes a head and torso simulator for hearing aid measurements. The device is intend for airbone acoustic measurements, and is not suitable for measurements which depend on vibration conduction path such as bone conduction. The head and torso simulator has been designed to provide diffraction similar to that encountered around the median human head and torso, and as such may be useful for other acoustical measurements. At present it has, however, only been validated for hearing aids, and other applications will require additional validatory studies. Some such studies have already shown that the head and torso simulator may not be suitable for the calibration of external earphones due to poor repeatability of their positioning; errors may exceed 10 dB.#,,#
Provisional head and torso simulator for acoustic measurements on air conduction hearing aids; identical with IEC 60959:1990
The purpose of this document is to define a test method with which to characterize the steady-state frequency response and input/output characteristics of hearing aids as the input level varies. This method is particularly useful for those hearing aids that have automatic gain control or other types of adaptive circuitry.
Testing Hearing Aids with a Broad-Band Noise Signal
Mechanical coupler for measurements on bone vibrations.
Describes methods of determining the overall performance and also the measurement of certain parameters including frequency response, air to air gain, acoustic output, internal noise etc.
Hearing aids - Methods for measurement of electroacoustical characteristics of hearing aid equipment not entirely worn on the listener
Basic features for objective calibration.
Specification for artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号