11.180.15 标准查询与下载

IEC TR 60959:1990 空气传导助听器声学测量用临时头戴筒式模拟器

Describes a simulator which reproduces approximately the acoustical effects of a median human adult, including diffraction affecting the performance of a hearing aid on a person. The device consists of a head mounted on a torso that extends to the waist.

Provisional head and torso simulator for acoustic measurements on air conduction hearing aids

IEC 60373:1990 骨传振动器测量用机械耦合器

Specifies requirements for mechanical couplers used for calibrating bone-conduction audiometers and for making measurements on bone vibrators and bone-conduction hearing aids in the frequency range from 125 Hz to 8 000 Hz inclusive. Reference equivalent

Mechanical coupler for measurements on bone vibrators

DIN 45605:1989 助听器.声学特性的数字表示法

Hearing aids; numerical expression of acoustical performance characteristics

DIN IEC 60118-9:1987 助听器.第9部分:骨振子输出助听器特性测量方法

This standard specifies methods of measurement of the characteristics of hearings aids using bone vibrator output. These methods, which are chosen to be practical and reproducible and are based on selected fixed parameters, will produce a suitable basis for the exchange of information or for direct comparison of the electroacoustical characteristics of hearing aids using bone vibrator output.

Hearing aids; methods of measurement of characteristics of hearing aids with bone vibrator output; identical with IEC 60118-9, edition 1985

ANSI/ASA S3.37-1987 耳后助听器用首选耳机挂钩管口螺纹

This standard describes a preferred thread for earhook nozzles on postauricular hearing aids. The need for such a standard arises from the wide variety of earhooks that hearing aid dispensers are required to keep in inventory to utilize different postauricular hearing aids from several manufacturers. This standard applies only to those postauricular hearing aids which utilize screw-on threads.

Preferred Earhook Nozzle Thread for Postauricular Hearing Aids

BS 6083-9:1986 助听器.第9部分:带骨传导振动器输出的助听器特性测量方法

Covers bone vibrators which are integral with, not integral with , or attachments to hearing aids, and specifies the methods of measuring the hearing aid output and expresses the input/output ratio as an acousto-mechanical sensitivity level measured on a mechanical coupler.

Hearing aids - Methods for measurement of characteristics of hearing aids with bone vibrator output

NF C97-611:1986 测量两耳插塞件联结耳机用的闭合式耳朵模拟器

Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts.

BS 6083-8:1985 助听器.第8部分:模拟现场工作条件测定助听器工作特性的方法

Describes test methods which simulate the acoustical effects of the presence of a median adult wearer on the performance of a hearing aid, by using a manikin (head and torso simulator) to provide realistic, in situ, test conditions.

Hearing aids - Methods for measurement of the performance characteristics of hearing aids under simulated in situ working conditions

IEC 60118-9:1985 助听器 第9部分:带有骨振输出的助听器性能测量方法

The methods described will produce a suitable basis for the exchange of information or for direct comparison of the electroacoustical characteristics of the device. These methods are chosen to be practical and reproducible and are based on selected fixed

Hearing aids. Part 9 : Methods of measurement of characteristics of hearing aids with bone vibrator output

BS 6083-5:1984 助听器 插入式耳机接头及密封装置尺寸规范

Specifies those dimensions which are essential in order to ensure the interchangeability of insert earphones as used with earmoulds or other attachments to the ear.

Hearing aids. Specification for dimensions of the nipple and sealing device for insert earphones

BS EN 60118-0:1984 助听器.电声特性测量方法

Describes the measurement of physical performance characteristics of air-conduction hearing aids based on a free-field technique and measured with an ear simulator.

Hearing aids - Methods for measurement of electroacoustical characteristics

BS 6083-11:1984 助听器.第11部分:助听器和有关设备的符号和其他标记规范

Specifies symbols and other markings for the switches and controls on hearing aids and related equipment for the benefit of users and those involved in the fitting of such equipment.

Hearing aids - Specification for symbols and other markings on hearing aids and related equipment

IEC TR 60118-8:1983 助听器 第8部分:在模拟现场工作条件下的助听器性能测量方法

Hearing aids. Part 8 : Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions

IEC 60118-0:1983 助听器 第0部分:电声特性的测量

Describes the measurement of physical performance characteristics of air-conduction hearing aids based on a free-field technique and measured with an ear simulator. Establishes methods of measurement to assess the characteristics of hearing aids. This se

Measurement of electroacoustical characteristics

IEC 60118-11:1983 助听器 第11部分:助听器及有关设备上的符号和其他标记

Is applicable to symbols and markings for the purpose of identifying control settings and giving information regarding technical functions and characteristics. Defines markings for gain controls, output controls, tone controls, switches, selectors, pre-s

Hearing aids. Part 11 : Symbols and other markings on hearing aids and related equipment

IEC 60118-3:1983 助听器 第3部分:不完全戴在听者身上的助听设备

Describes a method of determining the overall electroacoustic performance of equipment, used in the rehabilitation of persons having impaired hearing. The methods specified give information on the measurement of parameters, such as frequency response, ai

Hearing aids. Part 3 : Hearing aid equipment not entirely worn on the listener

IEC 60118-5:1983 助听器 第5部分:塞入式耳机塞头

Is applicable to devices which can be fitted to an earmould inserted into the ear canal. Defines those dimensions which are essential in order to ensure interchangeability of devices used with earmoulds or other attachments to the ear. The dimensions giv

Hearing aids. Part 5 : Nipples for insert earphones

IEC 60118-2:1983 助听器 第2部分:自动增益控制电路的助听器

Gives uniform methods for specifying dynamic and static performance characteristics together with the relevant methods of measurement for these characteristics. Includes devices which have compression and/or limiting properties with respect to the envelo

Hearing aids. Part 2 : Hearing aids with automatic gain control circuits

IEC 60118-7:1983 助听器 第7部分:助听器交货检验时的性能测量

Hearing aids. Part 7 : Measurement of performance characteristics of hearing aids for quality inspection for delivery purposes

BS 6310:1982 耳塞式耳机密闭听力测试模拟器规范

Specifies a simulator for the calibration of insert earphones in the frequency range 100 Hz to 10 000 Hz in terms of the sound pressure at the eardrum. Defines terms used, and gives performance specification and tests, coupling arrangements, calibration details and a specific example for the design of such a device.

Specification for occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts