11.180.20 造口术和失禁用设备 标准查询与下载
共找到 235 条与 造口术和失禁用设备 相关的标准，共 16 页
Absorbent incontinence aids for urine and/or faeces. General guidelines on evaluation
- ICS
- 11.180.20
- CCS
- C45
- 发布
- 2017-08-11
- 实施
- 2017-08-11
Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation
- ICS
- 11.180.20
- CCS
- 发布
- 2017-07-01
- 实施
This document gives guidelines for evaluating absorbent incontinence aids for urine and/or faeces. It provides a context for the procedures described in other International Standards and published testing procedures. General factors relating to incontinence products and their usage are also addressed.
Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation
- ICS
- 11.180.20
- CCS
- C47
- 发布
- 2017-06
- 实施
Absorbent underwear for disabled people. General specifications
- ICS
- 11.180.20
- CCS
- 发布
- 2017-00-00
- 实施
- 2018-01-01
Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 6. Gravimetric determination of fluid retention capacity in saline solution after centrifugation
- ICS
- 11.180.20
- CCS
- 发布
- 2017-00-00
- 实施
- 2018-01-01
Skin barrier for ostomy aids — Test methods — Part 1: Size, surface pH and water-absorbency
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-30
- 实施
Skin barrier for ostomy aids — Test methods — Part 1: Size, surface pH and water-absorbency
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-30
- 实施
This part of ISO 17190 specifies a method for determining the capacity of polyacrylate (PA) superabsorbent powders to absorb saline solution under a specified pressure. This method is applicable to materials having maximum 0,1 % of the particle size distribution below 45 µm.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 7: Gravimetric determination of absorption under pressure
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for measuring particle size distributions from 45 µm to 850 µm of cross-linked polyacrylate (PA) superabsorbent powders. In general, this method is expected to be applicable to powdered polymeric superabsorbent materials that are free-flowing at temperatures between 15 °C and 35 °C.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 3: Determination of particle size distribution by sieve fractionation
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the pH of polyacrylate (PA) superabsorbent powders. This method has been tested in the range of pH 5,92 to pH 6,14 (see annex A), but it is expected to be applicable to a wider range.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 1: Determination of pH
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the mass fraction of carboxylate groups of varying chain length present in polyacrylate (PA) superabsorbent powders which are extractable in saline solution. This method has been tested in the extractable polymer mass fraction range from 5,29 % to 9,00 % (see annex A), but it is expected to be applicable to a wider range.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the mass loss upon heating for cross-linked polyacrylate (PA) superabsorbent powders with a moisture content ranging between 0 % and 5 % by mass. The method is accurate to within ± 0,1 %. In general, this method is expected to be applicable to powdered polymeric superabsorbent materials that are free-flowing at temperatures between 15 °C and 150 °C. Substances other than water, that are volatile in this temperature range, will interfere.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 4: Determination of moisture content by mass loss upon heating
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the apparent density of polyacrylate (PA) superabsorbent powders. This method has been tested in the range 0,67 g/ml to 0,72 g/ml (see annex A), but it is expected to be applicable to a wider range.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 9: Gravimetric determination of density
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 8669 specifies performance requirements and test methods for open-ended and closed-ended urine collection bags of the following types: a) urine collection bags intended to be worn on the body (body-worn bags); b) urine collection bags intended to be used with a hanger or a floor stand (non-body-worn bags). It does not apply to urostomy bags, urimeters and urine bags intended specifically for paediatric use.
Urine collection bags -- Part 2: Requirements and test methods
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 8670 specifies a test method for the determination of odour transmission of colostomy and ileostomy bags. This method covers one-piece and multiple-piece systems having both closed-, and open-ended bags.
Ostomy collection bags -- Part 3: Determination of odour transmission of colostomy and ileostomy bags
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for the determination of the free swell capacity of polyacrylate (PA) superabsorbent powders in saline solution.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 5: Gravimetric determination of free swell capacity in saline solution
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the sum of residual monomeric sodium acrylate and acrylic acid present in polyacrylate (PA) superabsorbent powders as acrylic acid.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 2: Determination of amount of residual monomers
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the content of respirable particles in polyacrylate (PA) superabsorbent powders. NOTE Commercial polyacrylate superabsorbent powders consist of particles averaging 400 µm to 800 µm in diameter, which are much larger than the maximum size for respirable particles of approximately 10 µm. Due to the production process, very low amounts of respirable particles may be present in commercial superabsorbent powders.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 11: Determination of content of respirable particles
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the mass flowrate of polyacrylate (PA) superabsorbent powders. This method has been tested in the range 10,62 g/s to 11,93 g/s (see annex A), but it is expected to be applicable to a wider range of mass flowrates.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 8: Gravimetric determination of flowrate
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 17190 specifies a method for determining the fluid retention capacity of polyacrylate (PA) superabsorbent powders in saline solution, following centrifugation.
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation
- ICS
- 11.180.20
- CCS
- 发布
- 2016-12-22
- 实施
