13.020.60 产品寿命周期 标准查询与下载

ASTM E3199-22a 生命周期评估中二次材料输入和输出流建模和相关回收方案的替代分配方法的标准指南

1.1 This guide illustrates alternative allocation approaches that provide options for modeling secondary material flows and related recycling scenarios within a life cycle assessment (LCA) study. It helps practitioners characterize and understand materials recycling across industries; provides the available methodologies for consideration of the environmental impacts that are attributed to material and product flows in LCA; aids in assessment of the overall life cycle of systems and understanding of materials; and supports life cycle management. 1.2 The guide is not intended to contradict or circumvent the LCA provisions of ISO 14025, ISO 14040, ISO 14044, ISO 14067, ISO/TR 14049, or ISO 21930. When conflicts arise related to LCA, the guidance of those ISO standards takes precedence. 1.3 The following seven material-specific appendixes are included: Title Appendix Recycling of Copper Appendix X1 Recycling of Flue Gas Desulfurization (FGD) Gypsum Appendix X2 Recycling of Glass Appendix X3 Recycling of Plastics Appendix X4 Recycling of Post-consumer (PC) Gypsum Appendix X5 Recycling of Stainless Steel Appendix X6 Recycling of Supplementary Cementitious Materials Appendix X7 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment

T/REIANM 0102-2022 产品生命周期评价技术规范 稀土储氢合金

本文件对稀土储氢合金生命周期评价的基本规则和要求进行了规定。

Life cycle assessment specification on rare earth hydrogen storage alloy

T/CESA 1207-2022 产品生态设计指南 微型计算机

本文件给出了微型计算机产品生态设计的基本原则、过程及要点。 本文件适用于台式微型计算机和便携式微型计算机的产品生态设计，其他类型的微型计算机可以参照使用。

Guidelines of eco-design for products — Microcomputers

T/CESA 1206-2022 产品生态设计指南 广播电视接收机

本文件给出了广播电视接收机产品生态设计的基本原则、过程及要点。 本文件适用的广播电视接收机是在电网电压下正常工作，以地面、有线、卫星或其他模拟、数字信号接收、解调及显示为主要功能的平板电视，包括但不限于液晶电视（LCD电视）和有机发光二极管电视（OLED电视）等平板显示电视；也适用于主要功能为电视，不具备调谐器，但作为电视产品流通的平板显示设备。其他类型广播电视接收机的产品生态设计可参照使用。

Guidelines of eco-design for products — Televisions

T/CESA 1205-2022 产品生态设计指南 打印机及多功能一体机

本文件给出了打印机及多功能一体机产品生态设计的基本原则、过程及要点。 本文件适用于打印机及多功能一体机产品生态设计，包括用纸幅面为A4、A3的激光打印机、喷墨打印机、热敏打印机、针式打印机，以及以打印为基本功能的数字式多功能一体机。其他类型静电成像设备、喷墨成像设备、热成像设备，以及类似产品的生态设计可参照使用。

Guidelines of eco-design for products — Printers and multifunction devices

T/CAEE 008-2022 家电产品全生命周期追溯体系设计指南

含总体要求、追溯体系整体框架、设计要求和实施要求

Design guidelines for home appliance product life cycle traceability system

T/CAEE 007-2022 房间空气调节器生态设计要求

包括基本要求、供应链管理要求、产品结构设计要、原材料选取要求、生产过程要求等

Ecological design requirements for room air conditioners

T/SHJNXH 0005-2021 生命周期评价准则 乳制品

本标准规定了乳制品生命周期评价原则、评价框架、评价方法及报告的一般要求。

Life cycle assessment criteria for dairy products

GSO ASTM E3027:2021 在产品生命周期中做出与可持续性相关的化学品选择决策的标准指南

1.1 This guide outlines sustainability factors for product manufacturers to consider when comparing alternative chemicals or ingredients across the life cycle of a product. Such an analysis could be used in product development, answering customer inquiries, or replying to regulatory requests, among others. 1.2 This guide integrates many of the principles of green chemistry and green engineering in evaluating the factors across the social (including human health), economic, and ecological attributes in the use of a particular material and potential alternatives in a particular product. 1.3 This guide provides an outline for the contents of a report of the results of the analysis, including an executive summary, detailed report, and retrospective. 1.4 This guide does not provide guidance on how to perform chemical risk assessment, alternatives assessment, life-cycle assessment, or economic analysis, or how the alternatives decision-making framework will be completed. 1.5 This guide does not suggest in what order the social, ecological, or economic attributes of sustainability should be evaluated or which one is most important. This is a decision of the company performing the decision-making evaluation.

Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products

UNI EN ISO 14044:2021 环境管理 生命周期评估 要求和指南

Environmental management - Life cycle assessment - Requirements and guidelines

UNI EN ISO 14040:2021 环境管理-生命周期评估-原则和框架

Environmental management - Life cycle assessment - Principles and framework

PNS ISO/TS 14072:2021 环境管理.生命周期评估.组织生命周期评估的要求和标准

Environmental management - Life cycle assessment - Requirements and gu idelines for organizational life cycle assessment

PNS ISO/TS 14048:2021 环境管理.生命周期评估.数据文件格式

Environmental management - Life cycle assessment - Data documentation format

KS I ISO TS 14072-2020 环境管理 生命周期评估 组织生命周期评估的要求和指南

Environmental management ― Life cycle assessment ― Requirements and guidelines for organizational life cycle assessment

KS I ISO TS 14048-2020 环境管理 生命周期评价 数据文件格式

Environmental management－Life cycle assessment－Data documentation format

T/CAB 0078-2020 低碳氢、清洁氢与可再生氢的标准与评价

在单位氢气碳排放量方面，低碳氢的阀值为14.51 kgCO2e/kgH2，清洁氢和可再生氢的阀值为4.9 kgCO2e/kgH2，可再生氢同时要求制氢能源为可再生能源。

Standard and evaluation of low-carbon hydrogen, clean hydrogen and renewable hydrogen

LST EN ISO 14044/A2:2020 环境管理 生命周期评估 要求和指南 修正案 2（ISO 14044:2006/Amd 2:2020）

Environmental management - Life cycle assessment - Requirements and guidelines - Amendment 2 (ISO 14044:2006/Amd 2:2020)

LST EN ISO 14040/A1:2020 环境管理 生命周期评估 原则和框架 修正案 1（ISO 14040:2006/Amd 1:2020）

Environmental management - Life cycle assessment - Principles and framework - Amendment 1 (ISO 14040:2006/Amd 1:2020)

ISO 14044:2006/Amd 2:2020 环境管理.生命周期评估.要求和指南.修改件2

Environmental management — Life cycle assessment — Requirements and guidelines — Amendment 2

ASTM E3066-20 从生物量评估涉及能源或化学物质的相对可持续性的标准实践

1.1 This standard practice provides a science-based methodology for evaluating the relative sustainability of options involving energy or chemicals derived from biomass. Options may involve products, processes, or projects. 1.2 The methodology includes setting goals and objectives, identifying stakeholders, selecting appropriate indicators, and evaluating the relative sustainability of options where at least one option is available from biomass. 1.3 The objectives are to facilitate fair comparison of options, focus efforts on practical indicators reflecting stakeholder priorities, and support continual improvement for more sustainable outcomes. 1.4 The purpose of this standard practice is not to declare something as sustainable or not sustainable but to help users assess, compare, and rank options based on specific goals and objectives. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass