13.040.01 空气质量综合 标准查询与下载

T/AHEPI 0014-2023 采用气象要素的环境监测技术规范

本文件规定了采用气象要素的环境监测的术语和定义、布点与设备、监测系统、质量保证与控制、监测数据的处理、日常维护与检修等。 本文件适用于旅游、农业、林业、交通等领域采用自动监测系统对气象环境进行监测的活动。

Technical specifications for environmental monitoring using meteorological elements

T/QGCML 1236-2023 复合型抗菌除病毒空气净化滤网

本文件规定了复合型抗菌除病毒空气净化滤网的术语和定义、技术要求、检验和试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于复合型抗菌除病毒空气净化滤网的生产和检验。

Composite antibacterial and virus-removing air purification filter

ASTM E741-23 用示踪气体稀释法测定单个区域空气变化的标准试验方法

1.1 This test method covers techniques using tracer gas dilution for determining a single zone’s air change with the outdoors, as induced by weather conditions and by mechanical ventilation. These techniques are: (1) concentration decay, (2) constant injection, and (3) constant concentration. 1.2 This test method is restricted to a single tracer gas. 1.3 The associated data analysis assumes that one can characterize the tracer gas concentration within the zone with a single value. The zone shall be a building, vehicle, test cell, or any conforming enclosure. 1.4 Use of this test method requires a knowledge of the principles of gas analysis and instrumentation. Correct use of the formulas presented here requires consistent use of units, especially those of time. 1.5 Determination of the contribution to air change by individual components of the zone enclosure is beyond the scope of this test method. 1.6 The results from this test method pertain only to those conditions of weather and zonal operation that prevailed during the measurement. The use of the results from this test to predict air change under other conditions is beyond the scope of this test method. 1.7 The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered requirements of this test method. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

T/QGCML 729-2023 实验室废气收集处理排放技术规程

本标准规定了实验室废气收集处理排放技术规程的术语和定义、基本要求、废气收集、废气处理、废气排放。      本标准适用于实验室废气的收集处理排放。

Laboratory waste gas collection and treatment discharge technical regulations

T/HEEPA 4-2023 交通大气环境自动监测系统技术规范

本文件规定了交通大气环境自动监测系统（以下简称监测系统）的术语和定义、要求、检验与试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于交通大气环境自动监测系统的生产和性能检验。

Technical specification for traffic atmospheric environment automatic monitoring system

ASTM D5953M-23 用低温预浓缩和直接火焰电离检测法测定环境空气中非甲烷有机化合物（NMOC）的标准试验方法

1.1 This test method2 presents a procedure for sampling and determination of non-methane organic compounds (NMOC) in ambient, indoor, or workplace atmospheres. 1.2 This test method describes the collection of integrated whole air samples in silanized or other passivated stainless steel canisters, and their subsequent laboratory analysis. 1.2.1 This test method describes a procedure for sampling in canisters at final pressures above atmospheric pressure (pressurized sampling). 1.3 This test method employs a cryogenic trapping procedure for concentration of the NMOC prior to analysis. 1.4 This test method describes the determination of the NMOC by the flame ionization detection (FID), without the use of gas chromatographic columns and other procedures necessary for species separation. 1.5 The range of this test method is from 20 ppb C to 10 000 ppb C (1, 2).3 1.6 This test method has a larger uncertainty for some halogenated or oxygenated hydrocarbons than for simple hydrocarbons or aromatic compounds. This is especially true if there are high concentrations of chlorocarbons or chlorofluorocarbons present. 1.7 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection

GSO ASTM E1332:2023 室外 室内声音衰减评级的标准分类

  Scope is not provided for this standard

Standard Classification for Rating Outdoor-Indoor Sound Attenuation

KS I ISO 7168-2:2022 空气质量.数据交换.第2部分:压缩数据格式

Air quality — Exchange of data — Part 2: Condensed data format

KS I ISO 7168-1-2022 空气质量.数据交换.第1部分:一般数据格式

Air quality — Exchange of data — Part 1: General data format

T/GIEHA 056-2023 品牌评价 健康涂料

健康指标 6.1 基础指标 6.1.1 健康涂料的产品质量应符合 GB/T 9779、GB/T 9756 等标准的相关要求。 6.1.2 健康涂料的放射性核素应符合 GB 6566 中 A 类装饰装修材料的相关要求。 6.1.3 健康涂料的有害物质限量应符合 GB/ 21866 等标准的相关要求。 6.1.4 健康涂料在施工时的伴生污染物符合 GB 50325 的要求。

Brand evaluation-Health paint

KS I ISO 7168-1:2022 空气质量.数据交换.第1部分:一般数据格式

Air quality — Exchange of data — Part 1: General data format

KS I ISO 7168-2-2022 空气质量.数据交换.第2部分:压缩数据格式

Air quality — Exchange of data — Part 2: Condensed data format

T/QGCML 600-2022 节能环保式大气污染治理装置通用技术要求

本标准规定了节能环保式大气污染治理装置通用技术要求的术语定义、技术要求、试验方法、检验规则、使用说明与标志、包装、运输和贮存。 本标准适用于节能环保式大气污染治理装置的生产、检验和验收工作。

General technical requirements for energy-saving and environment-friendly air pollution control devices

T/HNSNWF 002-2022 室内环境净化治理施工能力等级资质 划分与评定准则

1、本标准适用于民用建筑工程如学校、幼儿园、医院、办公室、宾馆饭店、医院、影剧院、茶社等公共场所及居民住宅室内环境污染净化治理施工工程;也适应于全装修成品房开发商及装饰装修企业后期委托净化治理施工工程。    2、标准的主要技术内容包括适用范围、执行标准、等级划分、产品使用、人员素质、硬件设施、检测设备、资质管理等要求。   3.通过标准的制订，避免因没有规范标准、净化治理企业擅自购买伪造使用假资质证书欺骗消费者行为发生，扰乱市场公平竞争、形成各自为政的混乱局面。提高服务质量和室内环境污染治理效果。

Qualification classification and evaluation criteria for construction capacity of indoor environme

ISO 20044:2022 环境中放射性的测量.空气:气溶胶颗粒.用过滤介质取样的试验方法

This document provides guidance for — the sampling process of the aerosol particles in the air using filter media. This document takes into account the specific behaviour of aerosol particles in ambient air (Annex B). — Two methods for sampling procedures with subsequent or simultaneous measurement: — the determination of the activity concentration of radionuclides bound to aerosol particles in the air knowing the activity deposited in the filter; — the operating use of continuous air monitoring devices used for real time measurement. The activity concentration is expressed in becquerel per cubic metre (Bq∙m-3). This document describes the test method to determine activity concentrations of radionuclides bound to aerosol particles after air sampling passing through a filter media designed to trap aerosol particles. The method can be used for any type of environmental study or monitoring. The test method is used in the context of a quality assurance management system (ISO/IEC 17025[2]). This document does not cover the details of measurement test techniques (gamma spectroscopy, global alpha and beta counting, liquid scintillation, alpha spectrometry) used to determine the activity deposited in the media filter, which are either based on existing standards or internal methods developed by the laboratory in charge of those measurements. Also, this document does not cover the variability of the aerosol particle sizes as given by the composition of the dust contained in ambient air[3][4]. This document does not address to sampling of radionuclides bound to aerosol particles in the effluent air of nuclear facilities [see ISO 2889:2021][5]. The procedures described here facilitate the sampling of aerosol bound radionuclides. It is supposed to conform to the national and international requirements for monitoring programmes safety standards of IAEA[6]. The characteristics of the sampling location (coordinates, type of vegetation, obstacles) need to be documented prior to commencing the monitoring. The guidelines of the World Meteorology Organization (WMO) include the criteria for representative measurements of temperature, wind-speed, wind direction, humidity and precipitation for all the weather stations in the world[7].

Measurement of radioactivity in the environment — Air: aerosol particles — Test method using sampling by filter media

HJ 1270—2022 环境空气 26 种多溴二苯醚的测定 高分辨气相色谱-高分辨质谱法

本标准规定了测定环境空气中多溴二苯醚的高分辨气相色谱-高分辨质谱法。 本标准适用于环境空气气相和颗粒相中 BDE 7、BDE 15、BDE 17、BDE 28、BDE 47、BDE 49、 BDE 66、BDE 71、BDE 77、BDE 85、BDE 99、BDE 100、BDE 119、BDE 126、BDE 138、BDE 153、 BDE 154、BDE 156、BDE 175/183、BDE 184、BDE 191、BDE 196、BDE 197、BDE 206、BDE 207 和 BDE 209 共 26 种多溴二苯醚的测定。详见附录 A。 当采样体积为 1000 m3（标准状态），浓缩定容体积为 20 l 时，二至九溴二苯醚的方法检出限为 0.02 pg/m3～0.4 pg/m3，测定下限为 0.08 pg/m3～1.6 pg/m3；十溴二苯醚的方法检出限为 1 pg/m3，测定 下限为 4 pg/m3。当采样体积为 300 m3（标准状态），浓缩定容体积为 20 l 时，二至九溴二苯醚的方 法检出限为 0.05 pg/m3～2 pg/m3，测定下限为 0.20 pg

Ambient air—Determination of 26 polybrominated diphenyl ethers —High resolution gas chromatography-high resolution mass spectrometry

T/CAQI 298-2022 生态校园 室内空气质量评价要求

控制性、换气量、应急管理、教室内空气质量等。

Indoor Air Quality Evaluation Requirements for Ecological Campuses

ASTM D5702-18(2022) 重金属分析用涂层膜现场取样的标准实施规程

1.1 This practice covers a method to control the removal of samples of coating films from substrates for subsequent laboratory analysis for heavy metal content on a mass basis. This technique can be used in the field, the fabricating shop, or laboratory. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard information, see Section 5, Note 1, and Note 3. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

ASTM D8141-22 选择挥发性有机化合物（VOCs）和半挥发性有机化合物排放测试方法以确定室内环境建模排放参数的标准指南

1.1 This guide is intended to serve as a foundation for understanding when to use emission testing methods designed for volatile organic compounds (VOCs) to determine areaspecific emission rates that are typically used in modeling indoor air VOC concentrations and when to use emission testing methods designed for semi-volatile organic compounds (SVOCs) to determine mass transfer emission parameters that are typically used to model indoor air, dust, and surface SVOC concentrations. 1.2 This guide discusses how organic chemicals are conventionally categorized with respect to volatility. 1.3 This guide presents a simplified mass-transfer model describing organic chemical emissions from a material to bulk air. The values of the model parameters are shown to be specific to material/chemical/chamber combinations. 1.4 This guide shows how to use a mass-transfer model to estimate whether diffusion of the chemical within the material or convective mass transfer of the chemical from the surface of the material to the overlying air limits chemical emissions from the material surface. 1.5 This guide describes the range of different chambers that are available for emission testing. The chambers are classified as either dynamic or static and either conventional or sandwich. The chambers are categorized as being optimal to determine either the area-specific emission rate or masstransfer emission parameters. 1.6 This guide discusses the roles sorption and convective mass-transfer coefficients play in selecting the appropriate emission chamber and analysis method to accurately and efficiently characterize emissions from indoor materials for use in modeling indoor chemical concentrations. 1.7 This guide recommends when to choose an emission test method that is optimized to determine either the area-specific emission rate or mass-transfer emission parameters. For chemicals where the controlling mass-transfer process is unknown, the guide outlines a procedure to determine if the chemical emission is controlled by convective mass transfer of the chemical from the material. 1.8 This guide does not provide specific guidance for measuring emission parameters or conducting indoor exposure modeling. 1.9 Mechanisms controlling emissions from wet and dry materials and products are different. This guide considers the emission of chemicals from dry materials and products. Examples of functional uses of VOCs and SVOCs that this guide applies to include blowing agents, flame retardants, adhesives, plasticizers, solvents, antioxidants, preservatives, and coalescing agents (1).2 Emission estimations for other VOC and SVOC classes including those generated by incomplete combustion, spray application, or application as a powder (pesticides, termiticides, herbicides, stain repellents, sealants, water repellants) (1) may require different approaches than outlined in this guide because these processes can increase short-term concentrations of chemicals in the air independent of the volatility of the chemical and its categorization as a VVOC (very volatile organic compounds), VOC, SVOC, or NVOC (non-volatile organic compounds). 1.10 The effects of the emissions (for example, exposure, and health effects on occupants) are not addressed and are beyond the scope of this guide. 1.11 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.12 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the 1 This guide is under the jurisdiction of ASTM Committee D22 on Air Quality and is the direct responsibility of Subcommittee D22.05 on Indoor Air. Current edition approved Nov. 1, 2022. Published December 2022. Originally approved in 2017. Last previous edition approved in 2017 as D8141 – 17. DOI: 10.1520/D8141-22. 2 The boldface numbers in parentheses refer to the list of references at the end of this standard. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.13 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments

ASTM D5954-22a 用原子吸收光谱法对气体燃料中汞取样和测量的标准试验方法

1.1 This test method covers the determination of total mercury in gaseous fuels at concentrations down to 0.5 ng ⁄m3 . It includes separate procedures for both sampling and atomic absorption spectrophotometric determination of mercury. This procedure detects both inorganic and organic forms of mercury. 1.2 Units—The values stated in SI units are to be regarded as the standard. 1.3 Warning—Mercury has been designated by many regulatory agencies as a hazardous material that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Safety Data Sheet (SDS) for additional information. Users should be aware that selling mercury or mercury containing products, or both, into your state or country may be prohibited by law. 1.4 This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy