13.040.01 空气质量综合 标准查询与下载

T/HNSNWF 003-2022 新风系统（设备）安装施工能力等级 划分与评定指南

1、本标准适用于民用建筑工程如学校、幼儿园、医院、办公室、宾馆饭店、医院、影剧院、茶社等公共场所及居民住宅新风系统(设备)安装施工工程;也适应于全装修成品房及装饰装修企业加装新风设备的施工工程。   2、标准的主要技术内容包括适用范围、执行标准、等级划分、产品使用、人员素质、硬件设施、检测设备、资质管理等要求。   3、减少因没有安装施工标准规范造成的市场混乱局面，消费者可以准确的选择具备规范安装施工能力的正规企业为其服务。避免假资质盛行欺骗消费者行为发生，以消费者所安装的新风系统达到预期的效果

Guide for classification and evaluation of installation and construction capacity of fresh air sys.

T/ACEF 028-2021 规模化畜禽养殖场栏舍氨排放监测技术规范

一、布点 二、采样 三、监测记录 四、计算 五、质量保证与质量控制

Technical specifications for monitoring ammonia emission from the stalls of large-scale livestock and poultry farms

T/CSUS 35-2021 室内空气质量保障系统评价标准

本标准共包括7章，主要技术内容是：总则、术语、基本规定、材料、设备、施工、运维。

Indoor air quality assurance system evaluation standard

DB32/T 4172-2021 民用建筑室内装修工程环境质量验收规程

本规程适用于江苏省内新建、扩建和改建的民用建筑室内装修工程的环境质量验收。本规程不适用于有特殊净化卫生要求的室内装修工程及民用建筑室内装修工程交付使用后，非建筑装修产生的室内环境质量验收。

Regulations for acceptance of environmental quality of civil building interior decoration engineering

KS I ISO 7708-2021 空气质量.健康相关取样的粒度分数定义

Air quality — Particle size fraction definitions for health-related sampling

KS I ISO 7708:2021 空气质量.健康相关取样的粒度分数定义

Air quality — Particle size fraction definitions for health-related sampling

T/NAIA 092-2021 室内空气中甲醛浓度的测定 微孔板法

本文件规定了室内空气中甲醛浓度微孔板法测定方法。 本文件适用于室内空气中甲醛浓度测定的微孔板法测定。

Determination of Formaldehyde Concentration in Indoor Air by Microplate Method

KS I ISO 11222:2021 空气质量.空气质量测量的时间平均不确定度的测定

Air quality — Determiniation of the uncertainty of the time average of air quality measurements

KS I ISO 11222-2021 空气质量.空气质量测量的时间平均不确定度的测定

Air quality — Determiniation of the uncertainty of the time average of air quality measurements

BS ISO 2889:2021 从核设施的烟囱和管道中采样空气中的放射性物质

Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities

KS P 1104-2021 呼吸器面罩泄漏率测试方法

Leakage rate testing method for facepieces of respirstors

UNI CEN/TS 17458-2021 环境空气 评估颗粒物面向受体源解析建模应用性能的方法

Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter

T/CBMF 119-2021 室内空气气味评价方法

本文件规定了室内空气气味评价方法的术语和定义、材料和设备、气味评价实验室要求、人员基本要求、评价方法和试验报告。 本文件适用于室内空气气味的评价。

Assessment method of odour for indoor air

ASTM D6327-10(2021) 通过过滤器上的主动取样测定室内空气中氡衰变产物浓度和工作水平的标准试验方法

1.1 This test method provides instruction for using the grab sampling filter technique to determine accurate and reproducible measurements of indoor radon decay product (RDP) concentrations and of the working level (WL) value corresponding to those concentrations. 1.2 Measurements made in accordance with this test method will produce RDP concentrations representative of closedbuilding conditions. Results of measurements made under closed-building conditions will have a smaller variability and are more reproducible than measurements obtained when building conditions are not controlled. This test method may be utilized under non-controlled conditions, but a greater degree of variability in the results will occur. Variability in the results may also be an indication of temporal variability present at the sampling site. 1.3 This test method utilizes a short sampling period and the results are indicative of the conditions only at the place and time of sampling. The results obtained by this test method are not necessarily indicative of longer terms of sampling and should not be confused with such results. The averaging of multiple measurements over hours and days can, however, provide useful screening information. Individual measurements are generally obtained for diagnostic purposes. 1.4 The range of the test method may be considered from 0.0005 WL to unlimited working levels, and from 40 Bq/m3 to unlimited for each individual radon decay product. 1.5 This test method provides information on equipment, procedures, and quality control. It provides for measurements within typical residential or building environments and may not necessarily apply to specialized circumstances, for example, clean rooms. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 9 for additional precautions 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter

T/SDHCIA 012-2021 在线式固态聚合物电化学总挥发性有机物（TVOC）监测仪

本文件规定了在线式固态聚合物电化学总挥发性有机物（TVOC）监测仪的组成结构、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于利用固态聚合物电化学气体传感器连续智能监测固定污染源、环境空气中总挥发性有机物（TVOC）气体的仪器。针对不同行业的TVOC特征污染物的监测仪可参照执行本文件。

Online solid polymer electrochemical total volatile organic compounds（TVOC）monitor

GSO ASTM D6245:2021 使用室内二氧化碳浓度评估室内空气质量和通风的标准指南

1.1 This guide describes how measured values of indoor carbon dioxide (CO2) concentrations can be used in evaluations of indoor air quality and building ventilation. 1.2 This guide describes the determination of CO2 generation rates from people as a function of body size and level of physical activity. 1.3 This guide describes the experimentally-determined relationship between CO2 concentrations and the acceptability of a space in terms of human body odor. 1.4 This guide describes the following uses of indoor CO2 concentrations to evaluate building ventilation–mass balance analysis to determine the percent outdoor air intake at an air handler, the tracer gas decay technique to estimate whole building air change rates, and the constant injection tracer gas technique at equilibrium to estimate whole building air change rates. 1.5 This guide discusses the use of continuous monitoring of indoor and outdoor CO2 concentrations as a means of evaluating building ventilation and indoor air quality. 1.6 This guide discusses some concentration measurement issues, but it does not include or recommend a method for measuring CO2 concentrations.

Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

LST CEN ISO/TS 11665-12:2021 环境中放射性的测量-空气：氡-222-第12部分：防水材料中扩散系数的测定：膜单面活度浓度测量法（ISO/TS 11665-12:2018）

Measurement of radioactivity in the environment - Air: radon-222 - Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method (ISO/TS 11665-12:2018)

DIN ISO 11665-4:2021 环境中放射性的测量. 空气: 镭-222. 第4部分: 使用被动采样和延迟分析确定平均活性浓度的综合测量方法(ISO 11665-4-2020)

This International Standard outlines guidance for measuring radon-222 activity concentration and the potential alpha energy concentration of its short-lived decay products in the air. Part 4 of series ISO 11665 gives indications for measuring the average activity concentration of

Measurement of radioactivity in the environment - Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis (ISO 11665-4:2020)

PN-EN 17423-2021-04 E 建筑物的能源性能 一次能源因素（PEF）和 CO2 排放系数的确定和报告 一般原则，模块 M1-7

Energy performance of buildings -- Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient -- General Principles, Module M1-7

DS/CEN ISO/TS 11665-12:2021 环境中放射性的测量 空气：氡-222 第12部分：防水材料中扩散系数的测定：膜单面活度浓度测量法（ISO/TS 11665-12:2018）

Measurement of radioactivity in the environment – Air: radon-222 – Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method (ISO/TS 11665-12:2018)