13.040.40 固定源排放限值 标准查询与下载
共找到 1182 条与 固定源排放限值 相关的标准，共 79 页
本标准以现有相关评价指标和要求为基础，以综合性和系统性为原则，建立包装印刷行业低VOCs排放生产工艺筛评技术规范，旨在筛选符合印刷行业发展的绿色印刷技术，建立有助于在行业树立标杆，引导和规范印刷行业实施绿色制造，助力印刷行业绿色发展。 本评价指标体系由基础指标、单项筛评指标、综合绩效评价指标构成。基础指标为筛评的基本条件，为一票否决项；单项筛评指标包括绿色原辅材料、绿色印刷工艺、绿色印刷装备、绿色末端治理技术等四类低VOCs排放生产工艺；综合绩效评价指标包括综合资源利用绩效评价指标和综合环境效益评价指标，用于四类绿色技术的综合绩效评价，也可以用于相对独立的印刷生产企业或者生产设施的综合评价。
Guideline for screening and evaluating low VOCs emission production processes of packing and printing industry
- ICS
- 13.040.40
- CCS
- S952
- 发布
- 2021-12-15
- 实施
- 2022-08-09
本文件适用于现有工程机械和钢结构制造企业表面涂装工序大气污染物排放管理，以及工程机械和钢结构制造企业表面涂装工序建设项目的环境影响评价、环境保护设施设计、竣工环境保护验收、排污许可证核发及其投产后的大气污染物排放管理。
Air Pollutant Emission Standards for Surface Coating (Construction Machinery and Steel Structure Industry)
- ICS
- 13.040.40
- CCS
- Z 60
- 发布
- 2021-12-09
- 实施
- 2022-07-01
本文件适用于现有燃煤电厂的大气污染物排放管理，以及燃煤电厂建设项目的环境影响评价、环境保护工程设计、竣工环境保护验收、排污许可及其投产后的大气污染物排放管理。 本文件不适用于各种容量的以生活垃圾、危险废物为燃料的发电厂的大气污染物排放管理。
Air Pollutant Emission Standards for Coal-fired Power Plants
- ICS
- 13.040.40
- CCS
- Z 60
- 发布
- 2021-12-09
- 实施
- 2022-07-01
本文件适用于现有水泥工业企业或生产设施的大气污染物排放管理，以及水泥工业建设项目的环境影响评价、环境保护设施设计、竣工环境保护验收、排污许可及其投产后的大气污染物排放管理
Air Pollutant Emission Standards for Cement Industry
- ICS
- 13.040.40
- CCS
- Z 60
- 发布
- 2021-12-09
- 实施
- 2022-07-01
本标准规定了四川省水泥制造企业(含独立粉磨站)、水泥原料矿山、散装水泥中转站、水泥制品企业及其生产设施的大气污染物排放限值、监测及监督管理要求。
Emission Standards of Air Pollutants for Cement Industry in Sichuan Province
- ICS
- 13.040.40
- CCS
- Z60
- 发布
- 2021-12-08
- 实施
- 2022-07-01
本标准规定了四川省加油站汽油（包括含醇汽油）油气排放控制的技术要求、排放限值要求、监测要求和监督管理要求。 本标准适用于四川省现有加油站汽油（包括含醇汽油）油气排放管理，以及新、改、扩建加油站项目的环境影响评价、环境保护设施设计、竣工环境保护验收、排污许可证核发及其建成后的油气排放管理。
Air Pollutant Emission Standards for Gas Stations in Sichuan Province
- ICS
- 13.040.40
- CCS
- Z60
- 发布
- 2021-12-08
- 实施
- 2022-07-01
This document specifies the performance test of data acquisition and handling systems (DAHS). This includes: - specification of test procedures; - description of laboratory tests; - requirements on the testing laboratory. This document supports the requirements of EN 14181 and le
Stationary source emissions - Data acquisition and handling systems - Part 3: Specification of requirements for the performance test of data acquisition and handling systems; German version EN 17255-3:2021
- ICS
- 13.040.40
- CCS
- 发布
- 2021-12-00
- 实施
DIN ISO 2889:2012-07 deals with requirements for sampling of airborne radioactive materials from stacks and ducts of nuclear facilities. Supplement 3 provides the basics for the estimation of aerosol particle depositional losses in sample lines. By this corrigendum a note is adde
Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities; Supplement 3: Estimation of aerosol particle penetration and depositional losses in sample lines; Corrigendum 1
- ICS
- 13.040.40
- CCS
- 发布
- 2021-12-00
- 实施
Stationary source emissions. Data acquisition and handling systems. Specification of requirements for the performance test of data acquisition and handling systems
- ICS
- 13.040.40
- CCS
- 发布
- 2021-11-01
- 实施
- 2021-11-01
1.1 This practice covers the qualifications, including minimum requirements for personnel and equipment, duties, responsibilities, and services of laboratories engaged in the determination of lead in paint, or settled dust, or airborne particulates, or soil, or any combination thereof, taken from and around buildings and related structures. 1.2 This practice has been developed consistent with Guides E548 and E994, to supplement ISO/IEC 17025. 1.3 This practice contains notes that are explanatory and are not part of the mandatory requirements of the practice. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
- ICS
- 13.040.40
- CCS
- 发布
- 2021-11-01
- 实施
Stationary source emissions – Data acquisition and handling systems – Part 3: Specification of requirements for the performance test of data acquisition and handling systems
- ICS
- 13.040.40
- CCS
- 发布
- 2021-10-29
- 实施
- 2021-10-29
Stationary source emissions - Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
- ICS
- 13.040.40
- CCS
- 发布
- 2021-10-22
- 实施
- 2021-10-22
Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination
- ICS
- 13.040.40
- CCS
- 发布
- 2021-10-14
- 实施
- 2021-10-14
Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling
- ICS
- 13.040.40
- CCS
- 发布
- 2021-10-14
- 实施
- 2021-10-14
Electric motor-operated tools – Dust measurement procedure – Part 2-5: Particular requirements for circular saws
- ICS
- 13.040.40
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
Stationary source emissions - Data acquisition and handling systems - Part 3: Specification of requirements for the performance test of data acquisition and handling systems
- ICS
- 13.040.40
- CCS
- 发布
- 2021-10-00
- 实施
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or w
Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers; German version EN 50632-2-6:2015 + A1:2019 + A2:2020
- ICS
- 13.040.40
- CCS
- K64
- 发布
- 2021-10-00
- 实施
- 2021-10-01
Electric motor-operated tools – Dust measurement procedure – Part 2-17: Particular requirements for routers and trimmers
- ICS
- 13.040.40
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
Electric motor-operated tools – Dust measurement procedure – Part 2-14: Particular requirements for planers
- ICS
- 13.040.40
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
Electric motor-operated tools – Dust measurement procedure – Part 2-19: Particular requirements for jointers
- ICS
- 13.040.40
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
