13.220.20 防火 标准查询与下载

T/CASME 887-2023 多维监测防抑火系统

本文件规定了多维监测防抑火系统的性能要求、技术要求、试验方法、检验规则、运行维护等内容。

Multidimensional monitoring fire suppression system

ASTM E2307-23b 用中型多层试验装置测定周边防火屏障耐火性的标准试验方法

Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus

DB14/T 2869-2023 建筑消防设施检测规程

本文件适用于消防技术服务机构对已完成消防备案或消防验收合格建筑的消防设施检测，社会单位 自行开展建筑消防设施检测时可参照执行。

Inspection procedures for building fire protection facilities

ANSI/CAN/UL 260:2023 用于消防服务的干管阀和雨淋阀

Scope 1.1 These requirements cover valve equipment intended for installation in piping systems to supply water automatically to dry pipe, deluge, and pre-action sprinkler systems for fire-protection service. 1.2 Valves covered by these requirements may be a differential type, latched-clapper type, or a combination of these types. 1.3 The valves covered by these requirements are intended for installation and use in accordance with the following standards: a) Standard for Low-, Medium-, and High-Expansion Foam, NFPA 11. b) Standard for the Installation of Sprinkler Systems, NFPA 13. c) Standard for the Installation of Standpipe and Hose Systems, NFPA 14. d) Standard for Water Spray Fixed Systems for Fire Protection, NFPA 15 e) Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems, NFPA 16 1.4 This standard does not cover low-differential dry pipe valves or valves with differentials outside of the requirement specified for differential dry pipe valves.

Dry Pipe and Deluge Valves for Fire- Protection Service

DB6101/T 3173-2023 消防安全管理规范 中小学校

本文件规定了中小学校消防安全管理总体要求、消防安全职责、消防安全制度及操作规程、消防安全管理、灭火和应急疏散预案和消防档案的要求。 本规范适用于西安市中学、中等职业技术学校、小学消防安全管理。

Fire Safety Management Standards for Primary and Secondary Schools

BS EN 12259-12:2023 固定消防系统 洒水装置和喷水系统组件 泵

Fixed firefighting systems. Components for sprinkler and water spray systems - Pumps

T/SXJP 043-2023 球墨铸铁沟槽式管接件

4 要求 4.1 外观 4.2 产品参数 4.3 壳体 4.4 紧固件 4.5 橡胶密封圈 4.6 真空度（负压密封性） 4.7 气密封性能 4.8 密封性能 4.9 耐压强度 4.10 承载力矩 4.11 挠性接头偏转角 4.12 伸长间隙 4.13 耐低温性能 4.14 抗高温老化性能 4.15 耐水冲击性能 4.16 抗振动性能 4.17 耐火性能 5 试验方法 6 检验规则

Ductile iron grooved pipe fittings

T/SXJP 008-2023 球墨铸铁沟槽式管接件

4 要求 4.1 外观 4.2 产品参数 4.3 壳体 4.4 紧固件 4.5 橡胶密封圈 4.6 真空度（负压密封性） 4.7 气密封性能 4.8 密封性能 4.9 耐压强度 4.10 承载力矩 4.11 挠性接头偏转角 4.12 伸长间隙 4.13 耐低温性能 4.14 抗高温老化性能 4.15 耐水冲击性能 4.16 抗振动性能 4.17 耐火性能 5 试验方法 6 检验规则

Ductile iron grooved pipe fittings

GSO ISO/TS 17755-2:2023 消防安全统计数据收集 第2部分：词汇

Data collection is of prime importance in fire safety, for several reasons: assessing the effect of any regulation, providing probability and gravity data to fire risk analysis, and the selection of scenarios for examples in fire safety engineering. Statistical data collection of fires is nevertheless collected and analysed from local or national perspectives at the time of publication of this document, making any comparison difficult. A first step identified in the need for harmonization is the issue of terminology. This document defines terminology relating to fire statistical data, in order to supplement ISO 13943 for this specific field of application.

Fire safety — Statistical data collection — Part 2: Vocabulary

GSO IEC TR 62757:2023 高压直流（HVDC）系统变流器、静态无功补偿器（SVC）和柔性交流输电系统（FACTS）及其阀厅的防火措施

IEC TR 62757:2015(E), which is a technical report, deals with fire prevention measures on converters and their valve halls for high voltage direct current (HVDC) systems, static VAR compensators (SVC) and flexible AC transmission systems (FACTS). It is intended to be primarily for the use of the utilities and consultants who are responsible for issuing technical specifications for new converter valves and valve halls. It concerns fire incidents in HVDC projects using line commutated converters (LCC) or voltage sourced converter (VSC) technology and it is from these projects that most examples of fires and fire incidents are taken. This technical report also addresses converter valves and valve halls for SVC and FACTS. This technical report provides general recommendations to be considered while preparing specifications for these systems. Specific requirements for a particular project need to be clearly specified and mutually agreed upon between the supplier and the purchaser.

Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible AC transmission systems (FACTS) and their valve halls

GSO ISO 7240-13:2023 火灾探测和报警系统 第13部分：系统组件的兼容性评估

This document specifies the requirements for compatibility and connectability assessment of the components of fire detection and alarm systems, fire protection systems and voice alarm systems. This document only includes system requirements when these are necessary for compatibility assessment. This document also specifies requirements for the integrity of the fire detection and fire alarm system when connected to other systems. This document does not specify the manner in which the system is designed, installed and used in any particular application. This document does not cover components or functions which are not included in the fire detection and alarm systems (FDAS), such as functions performed by a building management system. Methods of assessment are specified to permit an acceptable degree of confidence within predetermined operational and environmental conditions to be achieved. The requirements for the transmission path used for a distributed function are covered by a relevant ISO standard and not by this document. This document is applicable to systems where the components are connected to control-and-indicating equipment (CIE) and where the components are interconnected by electrical wires or optical fibre or by radio frequency links or by any combination of these. ISO 7240-25 provides additional information and requirements about systems using radio frequency links. NOTE Other International Standards are expected to cover the requirements of other systems to which the fire detection and fire alarm system is connected.

Fire detection and alarm systems — Part 13: Compatibility assessment of system components

GSO ISO 6182-16:2023 消防 自动喷水灭火系统 第16部分：消防泵泄压阀的要求和试验方法

This document defines performance requirements, methods of testing and marking requirements for fire pump relief valves intended to rapidly relieve the excessive water pressure in the supply piping for standpipe systems or sprinkler systems or both. Performance and test requirements for other auxiliary components or attachments to fire pump relief valves are not covered by this standard.

Fire protection — Automatic sprinkler systems — Part 16: Requirements and test methods for fire pump relief valves

GSO ISO 6182-17:2023 消防 自动喷水灭火系统 第17部分：减压阀的要求和试验方法

This document specifies performance requirements, methods of test and marking requirements for pressure reducing valves intended to reduce the downstream water pressure in the piping for water-based fire protection systems. Within the context of this document, pressure reducing valves include both pilot operated pressure reducing valves and direct acting pressure reducing valves. Performance and test requirements for other auxiliary components or attachments to pressure reducing valves are not within the scope of this document.

Fire protection — Automatic sprinkler systems — Part 17: Requirements and test methods for pressure reducing valves

GSO ISO 7240-23:2023 火灾探测和报警系统 第23部分：视觉报警装置

ISO 7240-23:2013 specifies the requirements, test methods and performance criteria for visual alarm devices in a fixed installation intended to signal a visual warning of a fire between a fire detection and alarm system and occupants in and around buildings. ISO 7240-23:2013 specifies visual alarm devices for three types of application environment. It is only applicable to pulsing or flashing visual alarm devices, for example xenon beacons or rotating beacons. It is not applicable to devices giving continuous light output. ISO 7240-23:2013 is not intended to cover visual indicators, for example, on detectors or on the control and indicating equipment.

Fire detection and alarm systems — Part 23: Visual alarm devices

T/CFPA 028-2023 消防通道视频监测系统

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 系统组成　 5 技术要求 5.1 系统功能总体要求　 5.2 采集单元基本要求　 5.3 识别单元基本要求　 5.4 平台单元基本要求　 5.5 环境适应性要求　 5.6 电源适应性要求　 5.7 电磁兼容性要求　 5.8 安全性要求　 5.9 稳定性要求　 6 试验方法　 6.1 试验总则　 6.2 采集单元基本要求试验　 6.3 识别单元基本要求试验　 6.4 平台单元功能试验　 6.5 环境适应性试验　 6.6 电源适应性试验　 6.7 电磁兼容试验　 6.8 安全性试验　 6.9 稳定性试验　 7 检验规则　 7.1 出厂检验　 7.2 型式检验　 8 标志和包装　 8.1 产品标志　 8.2 质量检验标志　 8.3 包装　 附 录 A（规范性）测试样本集　 参考文献　

Video monitoring system for fire exit

T/CFPA 027-2023 红外热成像感温火灾探测器

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 分类　 5 技术要求　 5.1 通用要求　 5.2 功能要求　 5.3 安全性要求　 5.4 电磁兼容性要求　 5.5 环境适应性要求　 5.6 稳定性要求　 6 试验方法　 6.1 试验总则　 6.2 通用要求试验　 6.3 功能要求试验　 6.4 安全性试验　 6.5 电磁兼容性试验　 6.6 环境适应性试验　 7 检验规则　 7.1 出厂检验　 7.2 型式检验　 8 标志和包装　 8.1 产品标志　 8.2 质量检验标志　 8.3 包装　 9 使用说明书　 附  录  A（资料性）碰撞试验设备　 参考文献　

Infrared Thermography Heat Fire Detector

ISO/CD 6182-2:2023 消防 自动喷水灭火系统 第 2 部分：喷水灭火系统报警阀、止回阀、水力报警器、减速装置和加速器的要求和试验方法

Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for sprinkler system alarm valves, check valves, water motor alarms, retard devices and accelerators

DB62/T 4278.4-2023 消防安全规范 第4部分：乡村民宿

Fire Safety Code Part 4: Country Houses

DB62/T 4278.5-2023 消防安全规范 第5部分：宗教活动场所

Fire Safety Code Part 5: Places of Religious Activity

DB62/T 4750-2023 森林草原防火技术规范

Technical specifications for forest and grassland fire prevention