13.220.50 建筑材料和构件的阻燃性 标准查询与下载



共找到 1301 条与 建筑材料和构件的阻燃性 相关的标准,共 87

3 术语和定义  3.1 人防门  3.2 钢筋混凝土防护密闭门  3.3 钢结构防护密闭门  3.4 降落式防护密闭门  3.5 坡道内开式防护密闭门  3.6 防护密闭屏蔽门  3.7 防爆破活门  3.8 防护、防火密闭门  3.9 电控门  3.10 密闭观察窗  3.11 密闭阀门  3.12 地铁和隧道正线防护密闭隔断门  4 产品分类  5 基本规定  6 技术要求  6.1 一般要求  6.2 外观  6.3 尺寸  6.4 铰链  6.5 反复启闭  6.6 耐软重物体撞击性能  6.7 电气要求  6.8 防爆及防火性能  6.9 防烟性能  6.10 抗喷水冲击性能  6.11 漏气量  6.12 密闭性能  7 试验方法  7.1 外观  7.2 尺寸  7.3 铰链检验  7.4 反复启闭  7.5 耐软重物体撞击性能  7.6 电气要求  7.7 防爆及防火性能  7.8 防烟性能  7.9 抗喷水冲击性能  7.10 漏气量  7.11 密闭性能  8 工程质量验收  8.1 安装工程质量验收条件  8.2 安装工程质量验收   9 检验规则  9.1 检验分类  9.2 出厂检验  9.3 型式检验  10 标志

Technical specification for air defense door

ICS
13.220.50
CCS
C359
发布
2021-10-19
实施
2021-10-19

Extended application of test results on durability of self-closing for doorsets and openable windows -- Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows

ICS
13.220.50
CCS
发布
2021-10-18
实施
2021-10-18

Ventilation and air conditioning plants - Basic technical fire protection requirements - Additional specifications concerning OENORM EN 15423

ICS
13.220.50
CCS
发布
2021-10-15
实施
2021-10-15

Reaction to fire tests for building products -- Building products excluding floorings exposed to the thermal attack by a single burning item

ICS
13.220.50
CCS
发布
2021-10-13
实施
2021-10-13

Testing method for incombustibility of thin materials for buildings

ICS
13.220.50
CCS
发布
20211012
实施
20211012

Method of ignitability test of building products subjected to direct impingement of flame of multi-flame source test

ICS
13.220.50
CCS
发布
20211012
实施
20211012

Flame retardant testing method for vertical protection mesh

ICS
13.220.50
CCS
发布
20211012
实施
20211012

Method of ignitability test method of building products subjected to direct impingement of flame of single flame source

ICS
13.220.50
CCS
发布
20211012
实施
20211012

1.1 This test method, which is similar to thermal analysis techniques, establishes a procedure for determining flammability characteristics of combustible materials such as plastics. 1.2 The test is conducted in a laboratory environment using controlled heating of milligram specimens and complete thermal oxidation of the specimen gases. 1.3 Specimens of known mass are thermally decomposed in an oxygen-free (anaerobic) or oxidizing (aerobic) environment at a constant heating rate between 0.2 and 2 K/s. 1.4 The heat released by the specimen is determined from the mass of oxygen consumed to completely oxidize (combust) the specimen gases. 1.5 The rate of heat released by combustion of the specimen gases produced during controlled thermal or thermoxidative decomposition of the specimen is computed from the rate of oxygen consumption. 1.6 The specimen temperatures over which combustion heat is released are measured. 1.7 The mass of specimen remaining after the test is measured and used to compute the residual mass fraction. 1.8 The specimen shall be a material or composite material in any form (fiber, film, powder, pellet, droplet). This test method has been developed to facilitate material development and research. 1.9 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this test method. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

ICS
13.220.50
CCS
发布
2021-10-01
实施

Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

ICS
13.220.50
CCS
发布
2021-10-01
实施
2021-10-01

Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables

ICS
13.220.50
CCS
发布
2021-10-00
实施

Eurocode 3 - Design of steel structures - Part 1-2 : general rules - Structural fire design - National Annex to NF EN 1993-1-2:2005 - Amendment A1 - General rules - Structural fire design

ICS
13.220.50
CCS
发布
2021-09-18
实施
2021-09-18

Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows

ICS
13.220.50
CCS
发布
2021-09-15
实施
2021-09-15

This document is applicable to single and double leaf, hinged and pivoted metal framed, glazed doorsets or openable windows as covered by EN 15269-5 or EN 15269-20. This document prescribes the methodology for extending the application of test results obtained from durability of

Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows; German

ICS
13.220.50
CCS
发布
2021-09-00
实施

Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

ICS
13.220.50
CCS
发布
2021-09-00
实施

Fire resistance tests for service installations. Linear joint seals

ICS
13.220.50
CCS
P16
发布
2021-08-25
实施
2021-08-25

Fire resistance tests -- Part 1: General requirements

ICS
13.220.50
CCS
发布
2021-08-17
实施
2021-08-17

Determination of the resistance to jet fires of passive fire protection materials. General requirements

ICS
13.220.50
CCS
发布
2021-08-16
实施
2021-08-16

Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components

ICS
13.220.50
CCS
发布
2021-08-00
实施

Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services

ICS
13.220.50
CCS
发布
2021-08-00
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号