13.260 电击防护 标准查询与下载

ASTM D120-21 橡胶绝缘手套标准规格

1.1?This specification covers manufacturing and testing of rubber insulating gloves for protection of workers from electrical shock. 1.2?Two types of gloves are provided and are designated as Type I, non-resistant to ozone, and Type II, resistant to ozone. 1.3?Six classes of g

Standard Specification for Rubber Insulating Gloves

ASTM F1116-21 确定介质鞋类介电强度的标准测试方法

1.1?This test method covers testing to determine the “Dielectric Strength” of dielectric overfoot and overshoe footwear. Testing is done over the maximum possible area of the dielectric footwear without permitting flashover between electrodes. 1.2?The use and maintenance of die

Standard Test Method for Determining Dielectric Strength of Dielectric Footwear

ITU-T K.50 Erratum 1-2021 ITU-T K.50（2018）建议书勘误表 1（03/2021）、ITU-T K.50（2018）修正案 1（2020）和 ITU-T K.50（2018）勘误表 1（2020）

Erratum 1 (03/2021) to Recommendation ITU-T K.50 (2018), ITU-T K.50 (2018) Amendment 1(2020) and ITU-T K.50 (2018) Corrigendum 1(2020)

OVE E 8101-7-7N95-2021 低压电气装置 第 7N95 部分 电梯电源

Low-voltage electrical installations - Part 7N95 - Lift power supply

PN-EN IEC 60895-2021-01 E 带电工作 导电服（IEC 60895:2020）

Live working -- Conductive clothing (IEC 60895:2020)

NEMA TC 7-2021 实心壁可卷绕直聚乙烯电线管

Solid-Wall Coilable and Straight Electrical Polyethylene Conduit

ASTM F1505-16(2021) 绝缘和绝缘手工工具的标准规范

1.1 This specification covers the testing of insulated and insulating hand tools used for working on, or in close proximity to, energized electrical apparatus or conductors operating at maximum voltage of 1000 V ac or 1500 V dc. 1.2 The specific use of these tools is beyond the scope of this specification. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains to the test method portion only, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This specification does not purport to address all of the safety problems associated with the use of tools on, or in close proximity to, energized electrical apparatus. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Insulated and Insulating Hand Tools

PNS IEC 60364-4-41:2021 低压电气装置.第4-41部分：安全防护.电击防护

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

OVE EN 50365-2020 带电工作 用于低压和中压装置的电绝缘头盔（英文版）

Live Working - Electrically insulating helmets for use on low and medium voltage installations (english version)

OVE E 8101-5-5N02-2020 低压电气装置 第 5N02 部分 配电板的安装和连接

Low-voltage electrical installations - Part 5N02 - Setting up and connecting of distribution boards

ITU-T K.50 Corrigendum 1-2020 通过网络供电的电信系统中工作电压和电流的安全限制；勘误表 1

Safe limits for operating voltages and currents in telecommunication systems powered over the network; Corrigendum 1

OVE E 8101-7-7N54-2020 低压电气装置 第 7N54 部分 教室内固定实验台的电源

Low-voltage electrical installations - Part 7N54 - Power supply of stationary experiment stands in classrooms

ASTM F1506-20a 由暴露在火焰和电弧下的工作人员佩戴的耐火和电弧等级防护服的标准性能规范

Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs

DB4403/T 84-2020 雷电防护安全要求及检测规范 第3部分：油（气）站（库）

本部分适用于深圳市石油库、燃气场站、汽车加油加气站及合建站、燃气阀室、成品油阀室等的雷电防护。

Lightning Protection Safety Requirements and Testing Specifications Part 3: Oil (Gas) Stations (Depots)

T/ZSECA 004-2020 静电防护管理体系通用要求

1　范围　 2　规范性引用文件　 3　术语和定义　 4　组织管理　 5　文件要求　 6　人员培训　 7　识别　 8　配置　 9　标识　 10　包装　 11　采购外包　 12　监测　 13　检测　 14　内部审核　 15　管理评审　 16　持续改进　 17　静电防护区域　

General requirements for electrostatic protection management system

T/ZSECA 005-2020 静电屏蔽包装袋要求及检测方法

1　范围　 2　规范性引用文件　 3　术语和定义　 4　技术要求　 5　检测方法　 6　检验规则　 7　标志　 8　包装、运输和贮存　

Requirements and testing methods for electrostatic shielding packaging bags

EN IEC 60895:2020 带电工作 导电服

IEC 60895:2020 is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a reduction of electric field inside the clothing. This document is applicable to conductive clothing assembled from a conductive garment (jackets and trousers or coveralls forming a one-piece garment) and from conductive component parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC. This document does not indicate values of protection from the effects of the electric arc, because any value indicated would not guarantee the necessary protection from the effects of electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which would not allow the execution of the work in safety. The products designed and manufactured according to this document contribute to the safety of the users provided they are used by persons trained for the work, in accordance with the live working methods and the instructions for use. This third edition cancels and replaces the second edition, published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) increase of the use up to 1 000 kV AC and ±800 kV DC; b) introduction of two classes of conductive clothing with different electrical requirements; c) revision of the electrical requirements of conductive clothing; d) definition of specific resistance values for each component part of the conductive clothing; e) introduction of conductive helmet and conductive scarf as component parts of conductive clothing; f) introduction of mechanical requirements and new tests for fabrics; g) update of the cleaning test procedures; h) revision of the efficiency test of the conductive clothing to improve the feasibility and repeatability; i) preparation of the elements of classification of defects, and general application of IEC 61318:2007; j) the normative Annex B for the classification of tests has been replaced by normative Annex C for the general type tests procedure, the normative Annex D for the classification of defects and the informative Annex E providing the justification for the classification of defects; k) the normative Annex C on sampling procedure has been deleted (not applicable according to IEC 61318:2007); l) modification of the recommended frequency of the periodic tests.

Live working - Conductive clothing

DB42/T 680-2020 公路桥梁防雷装置检测技术规范

Technical specification for detection of lightning protection devices for highway bridges

DB42/T 510-2020 建筑物防雷装置跟踪检测技术规范

Technical specification for tracking and detection of lightning protection devices for buildings

ASTM F1506-20 由暴露在火焰和电弧下的工作人员佩戴的耐火和电弧等级防护服的标准性能规范

Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs