13.260 电击防护 标准查询与下载

ASTM F479-06(2017) 在绝缘橡皮布的在役护理标准规范

Standard Specification for In-Service Care of Insulating Blankets

HD 60364-5-52:2011/A11:2017 低压电气装置 第 5-52 部分：电气设备的选择和安装 布线系统

IEC 60364-5-52:2009 deals with the selection and erection of wiring systems. This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The main changes with respect to the previous edition are as follows: - Subclause 521.4 introduces minor changes with regard to busbar trunking systems and powertrack systems. - Subclause 523.6 introduces minor changes with regard to the sizing of cables where harmonic currents are present. - A new sublause 523.9 concerning single-core cables with a metallic covering has been introduced. - Clause 525 introduces changes in the maximum value of voltage drop permitted between the origin of the consumer's installation and the equipment which should not be greater than that given in the relevant annex. - Clause 526 introduces minor changes to electrical connections including additional exceptions for inspection of connections and additional notes. - Clause 528 introduces additional requirements with regard to proximity of underground power and telecommunication cables. - Clause 529 introduces minor changes to selection and erection of wiring systems in relation to maintainability, including cleaning.

Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

ASTM F1506-17b 由暴露在火焰和电弧下的工作人员佩戴的耐火和电弧等级防护服的标准性能规范

Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs

ASTM F1506-17be1 由暴露在火焰和电弧下的工作人员佩戴的耐火和电弧等级防护服的标准性能规范

Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs

ASTM F2522-12(2017) 标准测试方法 用于确定连接在带电工具或电缆杆上的防护罩的防护性能

Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards

EN 61057:2017 超过1kV 交流电带电作业用带绝缘臂的高架装置

IEC 61057:2017 is applicable to insulating aerial devices for mounting on a chassis, to be used for live working on electrical installations at nominal voltages above 1 000V r.m.s. AC in the range 45 Hz to 65 Hz and 1 500V DC. This second edition cancels and replaces the first edition published in 1991 and IEC TS 61813:2000. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) general review of the requirements and test provisions; b) preparation of the elements of evaluation of defects, and general application of IEC 61318:2007; c) distinguishes between tests for hollow booms and those for foam filled booms; d) references ISO 16368 for particular mechanical tests; e) further information on vacuum protection and leakage current monitoring and a mandatory requirement that aerial devices for bare hand work be fitted with a permanently installed lower test electrode system; f) controls of high electrical resistance; g) reference to SAE for insulating hydraulic hoses; h) inclusion of IEC TS 61813 for care, maintenance and in-service testing of aerial devices with insulating booms.

Live working - Insulating aerial devices for mounting on a chassis

GSO IEC 60832-2:2017 带电作业 绝缘棒和可连接设备 第2部分： 第2部分：可连接设备

This part of IEC 60832 gives the essential requirements for devices that can be attached onto and removed from the fitting of the insulating sticks for live working, for use on a.c. electrical installations. Part 1 of IEC 60832 covers insulating sticks. In this part of the standard, the term “device” is used for “attachable device”, unless otherwise specified. Products designed and manufactured according to this standard contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use.

Live working - Insulating sticks and attachable devices - Part 2: Part 2: Attachables devices

ASTM F1506-17a 由暴露在火焰和电弧下的工作人员佩戴的耐火和电弧等级防护服的标准性能规范

Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs

ASTM F3121/F3121M-17e1 手持式直线绝缘工具（玻璃纤维增​​强塑料（FRP））在线检测 维护和电气测试标准指南

Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))

JIS T 8010:2017 个人防护设备和绝缘装置耐电压试验方法

Testing method for withstand voltage of personal protective equipment and insulating devices

ASTM F1506-17 用于耐电弧和电弧额定纺织材料的标准性能规范 用于接触瞬时电弧和相关热危害的电工人员使用的服装

Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

DB45/T 446-2017 防雷装置检测技术规范

Technical specification for detection of lightning protection devices

DIN EN 60990:2017 接触电流和保护导体电流的测量方法(IEC 60990-2016);德文版本EN 60990-2016

Methods of measurement of touch current and protective conductor current (IEC 60990:2016); German version EN 60990:2016

BS EN 60855-1:2017 现场工作 绝缘泡沫填充管和实心棒 圆形截面的管材和棒材

Live working. Insulating foam-filled tubes and solid rods. Tubes and rods of a circular cross-section

EN 60855-1:2017 带电作业 绝缘泡沫填充管和实心棒 第1部分：圆形横截面的管和棒

IEC 60855-1:2016 is applicable to insulating foam-filled tubes and solid rods, of a circular cross-section, made of synthetic materials with reinforced fibreglass and intended to be used in the manufacture and construction of tools, devices and equipment for carrying out live working on electrical systems operating at voltages above 1 kV. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision.

Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section

ASTM F3121/F3121M-17 手持式带电绝缘工具(玻璃纤维增强塑料(FRP)运行中检查, 维护和电气试验的标准指南

3.1 Compliance with this guide should confirm known and acceptable quality of hand-held insulating live-line tools manufactured using fiberglass meeting Specification F711. The guidance herein is to be considered as a minimum requirement. 3.2 The user of this type of protective equipment should be knowledgeable of and instructed in the correct and safe inspection and use of this equipment. 1.1 This guide provides recommendations for in-service inspection, maintenance, and electrical testing of hand-held insulating live-line tools. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))

DB50/T 714-2016 旅游景区气象灾害风险管理规范

本标准适用于AAA级及以上旅游景区经营管理单位，AAA级以下旅游景区经营管理单位可参照执行

Standards for Meteorological Disaster Risk Management in Tourist Scenic Spots

DB50/T 715-2016 防雷安全检查规程

本标准适用于雷电灾害敏感单位及其行业主管部门的防雷安全检查

Lightning Protection Safety Inspection Regulations

ASTM F1505-16 绝缘和绝缘手工工具的标准规范

1.1 This specification covers the testing of insulated and insulating hand tools used for working on, or in close proximity to, energized electrical apparatus or conductors operating at maximum voltage of 1000 V ac or 1500 V dc. 1.2 The specific use of these tools is beyond the scope of this specification. 1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.4 The following precautionary caveat pertains to the test method portion only, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This specification does not purport to address all of the safety problems associated with the use of tools on, or in close proximity to, energized electrical apparatus.

Standard Specification for Insulated and Insulating Hand Tools

DIN VDE V 0681-2:2016 带电作业 标称电压超过 1 kV 的操作和测试设备 第2部分：开关棒规范

Live working - Devices for operating and testing with nominal voltages exceeding 1 kV - Part 2: Specifications for switching sticks